Manual d'usuari de l'adaptador universal Wi-Fi a Ethernet BrosTrend N300

1. Introducció

The BrosTrend N300 Universal WiFi to Ethernet Adapter is designed to provide wireless network connectivity to wired-only devices. This adapter connects to your existing Wi-Fi network and offers an Ethernet port to connect devices such as smart TVs, Blu-ray players, gaming consoles, printers, and desktop computers, enabling them to access the internet wirelessly.

Les característiques clau inclouen:

• Connectivitat sense fils: Converts Wi-Fi signal to a wired Ethernet connection.
• Port Fast Ethernet: Provides up to 100Mbps wired speed via an RJ45 port.
• Compatibilitat universal: Works with a wide range of wired devices.
• Font d'alimentació integrada: Plugs directly into a wall outlet, eliminating the need for an external power adapter.
• Antenes externes: Two external antennas enhance signal reception and stability.

2. Contingut del paquet

Si us plau, verifiqueu que el vostre paquet contingui els elements següents:

• 1 x BrosTrend N300 WiFi to Ethernet Adapter
• 1 x Guia d'instal·lació ràpida
• 1 x Ethernet Cable (5 feet)

3. Producte acabatview

Familiarize yourself with the adapter's components:

Imatge 3.1: Davant view of the BrosTrend N300 Adapter, showing LED indicators for Signal, Ethernet, and Internet, along with two external antennas.

Imatge 3.2: Close-up of the adapter's adjustable antennas, which can be rotated 180 degrees to optimize signal reception.

The adapter features LED indicators for Signal, Ethernet, and Internet status, providing visual feedback on its operational state.

4. Guia de configuració

Follow these steps to set up your BrosTrend N300 WiFi to Ethernet Adapter.

4.1 Consideracions de col·locació

For optimal performance, place the adapter in a location where it can receive a strong Wi-Fi signal from your router. Avoid placing it near large metal objects, concrete walls, or other devices that may cause interference.

Imatge 4.1: The adapter's compact design allows it to be plugged directly into a wall outlet without obstructing adjacent sockets.

4.2 Connecting a Wired Device

The adapter allows various wired devices to connect to your Wi-Fi network.

Imatge 4.2: Example of the adapter connecting a wired printer to a Wi-Fi network.

Imatge 4.3: The adapter providing wired internet access to a laptop via its Ethernet port.

Imatge 4.4: The adapter enabling a smart TV to connect to the internet wirelessly.

4.3 Mètodes de configuració

The BrosTrend N300 adapter can be configured using either WPS (Wi-Fi Protected Setup) or a web navegador.

4.3.1 WPS Setup (Recommended for quick setup)

1. Plug the BrosTrend N300 adapter into a power outlet near your Wi-Fi router.
2. Wait for the adapter to power on. The Signal LED will start blinking.
3. Press the WPS button on your Wi-Fi router.

Imatge 4.5: Locating and pressing the WPS button on your router.
4. Within two minutes, press the WPS button on the BrosTrend N300 adapter.


Imatge 4.6: Pressing the WPS button on the BrosTrend adapter.

5. The Signal LED on the adapter will turn solid blue or orange when successfully connected to your Wi-Fi network.
6. Once connected, you can unplug the adapter and relocate it to a suitable position near your wired device.
7. Connect your wired device to the adapter's Ethernet port using the provided Ethernet cable.


Imatge 4.7: A wired printer successfully connected to the network via the adapter.


Imatge 4.8: A laptop successfully connected to the network via the adapter.

4.3.2 Web Browser Setup (Alternative method)

1. Plug the BrosTrend N300 adapter into a power outlet.
2. Connect your computer directly to the adapter's Ethernet port using an Ethernet cable.
3. Obre a web browser on your computer and enter the default setup address (refer to the Quick Installation Guide for the specific address, typically setupwifi.net or an IP address).


Imatge 4.9: Example de la web-based setup interface.

4. Follow the on-screen instructions to select your Wi-Fi network and enter the password.
5. Once configured, the adapter will connect to your Wi-Fi network. The Signal LED will turn solid blue or orange.
6. You can then disconnect your computer and connect your desired wired device to the adapter.

5. Funcionament

5.1 Estat dels indicadors LED

The LEDs on the BrosTrend N300 adapter provide important status information:

Imatge 5.1: LED indicators for signal strength.

• LED de senyal:
  • Blau parpellejant: Pairing with your existing Wi-Fi router.
  • Blau sòlid: Connected to your existing Wi-Fi router with a strong signal.
  • Taronja sòlida: Connected to your existing Wi-Fi router with a fair signal. Consider relocating the adapter closer to your router for better performance.
  • Apagat: No està connectat a una xarxa Wi-Fi.
• LED Ethernet:
  • Sòlid: Un dispositiu està connectat al port Ethernet.
  • Parpellejant: Data is being transmitted through the Ethernet port.
  • Apagat: No hi ha cap dispositiu connectat al port Ethernet.
• LED d'Internet:
  • Sòlid: The adapter has internet access.
  • Apagat: Sense accés a internet.

6. Solució De Problemes

If you encounter issues with your BrosTrend N300 adapter, refer to the following common problems and solutions:

• Sense accés a Internet:
  • Ensure the Internet LED is solid. If not, check your main router's internet connection.
  • Verify the Ethernet cable is securely connected between the adapter and your device.
  • Restart both the adapter and your main router.
• Cannot Connect to Wi-Fi Network:
  • Ensure the Signal LED is solid blue or orange. If it's off or blinking, try WPS setup again or use the web configuració del navegador.
  • Relocate the adapter closer to your Wi-Fi router to improve signal strength.
  • Verify that your Wi-Fi network name (SSID) and password are correct. Some special characters in SSIDs may not be supported; simplify if possible.
  • Ensure your router's Wi-Fi is enabled and broadcasting.
• Velocitat de connexió lenta:
  • Check the Signal LED. If it's orange, the signal is fair. Try moving the adapter closer to your router.
  • Ensure there are no obstructions or interference sources between the adapter and the router.
  • Confirm your wired device supports 100Mbps Ethernet.
• La configuració de WPS ha fallat:
  • Ensure you press the WPS button on both the router and adapter within the two-minute window.
  • Some routers may have a different WPS activation method; consult your router's manual.
  • Si el WPS continua fallant, feu servir el web mètode de configuració del navegador.

7. Especificacions

8. Informació de seguretat

• No exposeu el dispositiu a l'aigua ni a la humitat.
• No intenteu desmuntar o reparar el dispositiu vosaltres mateixos.
• Use only the power source specified for this device.
• Mantingueu el dispositiu lluny de fonts de calor i de la llum solar directa.
• Assegureu-vos una ventilació adequada al voltant del dispositiu.

9. Garantia i Suport

BrosTrend Technology LLC manufactures this product. For warranty information and technical support, please refer to the documentation included with your purchase or visit the official BrosTrend website. Contact information for support is typically available on the manufacturer's weblloc.