1. Introducció
This instruction manual provides comprehensive guidance for the safe and efficient operation, setup, maintenance, and troubleshooting of your Graco Ultra XT 490 Hi-Boy Electric Airless Sprayer. Please read this manual thoroughly before operating the equipment to ensure proper use and to prevent injury or damage.
The Graco Ultra XT 490 Hi-Boy is designed for professional painting applications, featuring advanced technologies for enhanced performance and durability. Key features include:
- Xtreme Torque Motor Technology: Provides powerful and consistent performance.
- RapidResponse Control: Ensures quick and precise pressure adjustments.
- Selectable Performance Modes: Allows optimization for various materials and applications.
- Easy-to-Read LED Digital Display: Offers clear visibility of operational settings.
- Endurance Vortex Piston Pump with ProConnect: Delivers extended pump life and easy on-the-job pump replacement.
- TurboClean Cleaning System: Facilitates fast and thorough cleaning.
2. Informació de seguretat
Always observe the following safety precautions to reduce the risk of injury or property damage. Failure to follow these instructions can result in serious injury or death.
- Llegiu totes les instruccions abans d'utilitzar l'equip.
- Wear appropriate personal protective equipment (PPE), including eye protection, gloves, and a respirator.
- Assegureu-vos que la zona de treball estigui ben ventilada i lliure de fonts d'ignició.
- Never point the spray gun at yourself or others. High-pressure fluid can cause serious injury.
- Always relieve pressure before cleaning, servicing, or removing any parts.
- Use only Graco-approved replacement parts and accessories.
- Mantingueu els nens i les mascotes lluny de l'equip durant el funcionament.
- Do not operate the sprayer if any part is damaged or malfunctioning.
- Connect the sprayer to a properly grounded electrical outlet.
3. Contingut del paquet
Verify that all components are present in the package before beginning setup:
- Graco Ultra XT 490 Hi-Boy Electric Airless Sprayer Unit
- Contractor PC Gun
- Mànega d'alta pressió
- RAC X LP 517 SwitchTip
- Manual d'instruccions (aquest document)
4. Configuració
Follow these steps for initial setup of your Graco Ultra XT 490 Hi-Boy sprayer:
- Desembalatge: Traieu amb cura tots els components de l'embalatge. Inspeccioneu-ho per veure si hi ha danys durant l'enviament.
- Positioning the Sprayer: Place the sprayer on a stable, level surface in a well-ventilated area. Ensure adequate space for operation and movement.
- Connexió de la mànega:
- Connect one end of the high-pressure hose to the fluid outlet on the sprayer. Tighten securely with a wrench.
- Connect the other end of the high-pressure hose to the inlet of the Contractor PC Gun. Tighten securely.
- Installing the Spray Tip:
- Ensure the spray gun trigger guard is engaged.
- Insert the RAC X LP 517 SwitchTip into the tip guard on the Contractor PC Gun.
- Rotate the tip 180 degrees to the spray position.
- Connexió d'alimentació: Connect the sprayer's power cord to a grounded 120V AC electrical outlet.
5. Instruccions de funcionament
This section outlines the general operating procedures for the Graco Ultra XT 490 Hi-Boy sprayer. Always refer to the specific instructions for your chosen coating material.
- Priming the Sprayer:
- Place the suction tube into the paint container and the drain tube into a waste bucket.
- Turn the prime valve to the "Prime" position.
- Turn on the sprayer. The pump will begin to draw material.
- Once material flows smoothly from the drain tube, turn off the sprayer.
- Turn the prime valve to the "Spray" position.
- Ajust de pressió:
- Enceneu el polvoritzador.
- Use the RapidResponse Control and Easy-to-Read LED Digital Display to set the desired pressure. Start with a lower pressure and gradually increase until a consistent spray pattern is achieved.
- Select the appropriate performance mode for your material and application using the selectable performance modes feature.
- Tècnica de polvorització:
- Hold the Contractor PC Gun perpendicular to the surface, maintaining a consistent distance.
- Begin moving your arm before pulling the trigger and release the trigger before stopping your arm movement.
- Superposeu cada passada aproximadament un 50% per garantir una cobertura uniforme.
- Apagant:
- Apagueu el polvoritzador.
- Engage the trigger guard on the spray gun.
- Relieve pressure by turning the prime valve to the "Prime" position and holding the gun over a waste bucket until pressure is released.
6. Manteniment
Regular maintenance ensures the longevity and optimal performance of your Graco Ultra XT 490 Hi-Boy sprayer.
- Neteja després de cada ús:
- Utilize the TurboClean Cleaning System for quick and efficient flushing of the system.
- Flush the sprayer with an appropriate cleaning solution (water for latex, mineral spirits for oil-based paints) until the fluid runs clear.
- Clean the spray gun, tip, and filter thoroughly.
- Manteniment de la bomba:
- The Endurance Vortex Piston Pump with ProConnect allows for easy on-the-job pump replacement. Refer to the ProConnect instructions for detailed replacement procedures if necessary.
- Regularly check the pump for wear and tear.
- Emmagatzematge:
- Store the sprayer in a clean, dry, and frost-free environment.
- Always relieve pressure before storing.
- For long-term storage, circulate pump protector fluid through the system.
7. Solució De Problemes
This section addresses common issues you might encounter with your Graco Ultra XT 490 Hi-Boy sprayer. For more complex problems, contact Graco customer support.
| Problema | Causa possible | Solució |
|---|---|---|
| Sense esprai o esprai feble | Clogged tip, low pressure setting, air in system, worn pump. | Clean or replace tip, increase pressure, prime system, inspect pump. |
| Spray pulsatiu | Air leak in suction hose, clogged filter, worn packings. | Check hose connections, clean filters, replace packings. |
| El motor funciona però sense pressió | Prime valve in wrong position, clogged inlet strainer, dry pump. | Ensure prime valve is in "Spray", clean strainer, prime pump. |
8. Especificacions
| Característica | Detall |
|---|---|
| Marca | Graco |
| Nom del model | Ultra XT 490 |
| Número de model de l'article | 19D521 |
| Font d'alimentació | Elèctric de 120V |
| Pressió màxima | 3300 PSI (lliura per polzada quadrada) |
| Usos recomanats | Pintura |
| Material | Plastic (housing components) |
| Estil | Cart-mounted, Hi-Boy |
| Pes de l'article | 78 lliures |
| Dimensions del paquet | 33 x 25.5 x 22 polzades |
| UPC | 769946346305 |
9. Garantia i Suport
Graco products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Graco website. For technical support, replacement parts, or service inquiries, please contact Graco customer service directly.
Podeu trobar més informació i recursos de suport a Graco Brand Store.
