Kärcher WD 3 S Wet & Dry Vacuum Cleaner User Manual

Introducció

Thank you for choosing the Kärcher WD 3 S Wet & Dry Vacuum Cleaner. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your appliance. Please read these instructions carefully before first use and keep them for future reference.

Instruccions de seguretat

Observeu sempre les següents precaucions de seguretat per evitar accidents i danys a l'aparell:

• Assegureu-vos que el voltage indicated on the rating plate matches your local power supply before connecting.
• Do not vacuum flammable or explosive liquids, hot ash, or sharp objects.
• Never operate the appliance without the filter installed.
• Unplug the vacuum cleaner from the power outlet before cleaning, maintenance, or when not in use.
• Mantingueu els nens i les persones no autoritzades allunyats de l'aparell durant el funcionament.
• Do not use the appliance if the power cord or other parts are damaged.

Contingut del paquet

Verifiqueu que tots els components siguin presents en desembalar-lo:

• Kärcher WD 3 S Wet & Dry Vacuum Cleaner unit
• Mànega de succió
• Tubs d'extensió
• Floor nozzle (wet/dry)
• Boquilla de crepit
• Filtre de cartutxos
• Fleece filter bag(s)
• Manual d'usuari

Configuració

1. Desembalar: Traieu tots els components de l'embalatge.
2. Col·loca les rodes: Securely attach the wheels to the base of the vacuum cleaner unit.
3. Instal·leu el filtre:
   • Per Aspiració en sec: Insert the fleece filter bag into the container and ensure the cartridge filter is correctly seated on the motor head.
   • Per Aspiració humida: Remove the fleece filter bag. The cartridge filter is suitable for both wet and dry applications, but ensure it is clean before wet use.
4. Assemble Hose and Tubes: Connect the suction hose to the suction port on the vacuum cleaner. Attach the extension tubes to the hose, and then attach the desired nozzle (floor nozzle or crevice nozzle) to the end of the tubes.
5. Connexió d'alimentació: Connecteu el cable d'alimentació a una presa de corrent adequada.

Instruccions de funcionament

Aspiració en sec

For dry dirt and dust, ensure a fleece filter bag is installed and the cartridge filter is clean. Use the appropriate nozzle for the surface.

• Sòls durs: Use the floor nozzle without brushes extended for optimal suction on hard surfaces.
• Catifes: Use the floor nozzle with brushes extended to agitate and lift dirt from carpet fibers.
• Upholstery/Tight Spaces: Attach the crevice nozzle or upholstery nozzle for cleaning furniture, car interiors, or narrow gaps.

Aspiració humida

For vacuuming liquids, remove the fleece filter bag. The cartridge filter is designed for both wet and dry use. Ensure the container is empty before starting.

• Use the wet floor nozzle attachment for larger spills.
• For smaller spills or tight areas, the crevice nozzle can be used.
• Do not exceed the maximum liquid fill level indicated on the container.
• After wet vacuuming, empty the container and allow all components to dry thoroughly to prevent mold or odors.

Manteniment

Buidatge del contenidor

Regularly empty the container, especially after wet vacuuming or when the suction power decreases during dry vacuuming.

1. Desendolleu l'aparell.
2. Release the locking clips and remove the motor head.
3. Carefully lift and empty the container. Dispose of contents responsibly.
4. Clean the container with water if necessary and allow it to dry completely before reassembling.

Neteja del filtre del cartutx

The cartridge filter should be cleaned regularly to maintain optimal suction performance.

1. Unplug the appliance and remove the motor head.
2. Carefully remove the cartridge filter from its housing.
3. Tap the filter gently to dislodge dry dust, or rinse it under running water for thorough cleaning.
4. Allow the filter to air dry completely before reinstalling. Do not use the vacuum with a wet filter for dry vacuuming.

Replacing Filter Bags

Replace the fleece filter bag when it is full or when suction power noticeably decreases during dry vacuuming. Use only genuine Kärcher replacement bags.

Resolució de problemes

• No Suction Power:
  • Check if the container is full and needs emptying.
  • Inspect the filter bag for fullness or blockages.
  • Netegeu o substituïu el filtre del cartutx.
  • Check the hose, tubes, and nozzles for blockages.
• Appliance Does Not Start:
  • Assegureu-vos que el cable d'alimentació estigui ben connectat a una presa de corrent.
  • Check the power switch for proper engagement.
  • Verifiqueu que l'interruptor automàtic no s'hagi disparat.
• Water Leaks During Wet Vacuuming:
  • Ensure the motor head is correctly seated and the locking clips are secured.
  • Check for cracks or damage to the container.
  • Do not exceed the maximum liquid fill level.

Especificacions

Garantia i Suport

Els productes Kärcher es fabriquen amb estàndards d'alta qualitat i inclouen una garantia del fabricant. Per conèixer els termes i condicions específics de la garantia, consulteu la targeta de garantia inclosa amb el vostre producte o visiteu el lloc web oficial de Kärcher. website. For technical support, spare parts, or service inquiries, please contact Kärcher customer service or an authorized service center.

You can find more information and contact details on the official Kärcher weblloc: www.kaercher.com