Electro-Voice ZLX-12P-G2 12-inch Powered Loudspeaker System User Manual

1. Introducció

Thank you for choosing the Electro-Voice ZLX-12P-G2 Powered Loudspeaker System. This manual provides essential information to help you safely and effectively set up, operate, and maintain your new audio equipment. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

2. Informació de seguretat

Always observe the following safety precautions to prevent electric shock, injury, or damage to the equipment:

Font d'alimentació: Connect the loudspeaker only to a power supply of the type described in this manual and marked on the unit.
Posada a terra: Ensure the power cord is properly grounded to prevent electrical hazards.
Humitat: No exposeu la unitat a la pluja ni a la humitat. No col·loqueu objectes plens de líquids, com ara gerros, a sobre de la unitat.
Ventilació: Assegureu-vos que hi hagi una ventilació adequada. No bloquegeu les obertures de ventilació.
Calor: No col·loqueu la unitat a prop de fonts de calor com ara radiadors, registres de calor, estufes o altres aparells que produeixin calor.
Manteniment: No intenteu atendre aquest producte vosaltres mateixos. Consulteu tots els serveis a personal de servei qualificat.
Speaker Stands: When using speaker stands, ensure they are stable and correctly assembled. Do not exceed the maximum weight capacity of the stands.

3. Contingut del paquet

Verifiqueu que tots els elements que s'enumeren a continuació s'inclouen al vostre paquet:

2x Electro-Voice ZLX-12P-G2 12-inch Powered Loudspeakers
2x Auray SS-47S-PB Steel Speaker Stands
1x Carrying Case for Speaker Stands
2x XLR Cables
2x Power Cords (not explicitly listed in JSON but implied for powered speakers)
Aquest manual d'usuari

Electro-Voice ZLX-12P-G2 Loudspeaker System Bundle — Figure 3.1: Complete ZLX-12P-G2 Loudspeaker System Bundle, including two loudspeakers, two speaker stands, a carrying case, and two XLR cables.

4. Configuració

4.1 Col·locació dels altaveus

The ZLX-12P-G2 loudspeakers offer versatile placement options:

Pis de peu: Place directly on a stable, flat surface.
Pole-Mounted: Use the included Auray SS-47S-PB steel speaker stands. Ensure the pole is securely inserted into the speaker's pole mount and the stand's legs are fully extended for stability.
Monitor/Kick-Back: The cabinet design allows for use as a floor monitor, angled towards the performer.

Electro-Voice ZLX-12P-G2 Loudspeaker Front-Side View — Figura 4.1: Part frontal view of a single ZLX-12P-G2 loudspeaker, illustrating its compact design suitable for various placements.

Auray SS-47S-PB Steel Speaker Stands with Carrying Case — Figure 4.2: The included Auray SS-47S-PB steel speaker stands and their carrying case, designed for stable loudspeaker elevation.

4.2 Cables de connexió

Refer to the rear panel for all connections:

Potència: Connect the power cord to the MAINS IN socket and then to a suitable AC power outlet.
Entrada d'àudio: Use the included XLR cables to connect your audio source (mixer, microphone, instrument) to INPUT 1 or INPUT 2. These inputs accept both XLR and 1/4" TRS/TS connectors. A 3.5mm Aux input is also available for consumer devices.
Sortida d'àudio: The MIX OUT XLR connector provides a mixed signal of all inputs for connecting to additional loudspeakers or recording devices.

Electro-Voice ZLX-12P-G2 Rear Panel Connections — Figura 4.3: Detallada view of the ZLX-12P-G2 rear panel, showing input/output connections, DSP control, and power switch.

XLR Audio Cable — Figure 4.4: An XLR audio cable, commonly used for connecting microphones and mixers to the loudspeaker inputs.

4.3 Encès inicial

After all connections are made, switch the MAINS IN power switch to the ON position. The LCD display will illuminate, indicating the unit is powered on and ready for operation.

5. Instruccions de funcionament

5.1 DSP Control and LCD Display

The ZLX-12P-G2 features a 1-knob DSP (Digital Signal Processor) control and an LCD display for easy system configuration. Rotate the knob to navigate menus and press to select options. Adjust settings such as EQ, crossover, and application presets (e.g., Music, Live, Speech, Club).

5.2 Input and Output Gain Controls

Independent gain controls for INPUT 1 and INPUT 2 allow you to adjust the volume of each connected source. The MASTER volume control adjusts the overall output level of the loudspeaker.

Reproducció d'àudio Bluetooth 5.3

The ZLX-12P-G2 is Bluetooth-enabled for wireless audio streaming:

Activate Bluetooth on your smartphone or laptop.
Select the ZLX-12P-G2 from the list of available devices.
Once paired, audio from your device will stream wirelessly to the loudspeaker.

5.4 Control d'aplicacions

For advanced control and monitoring, download the official Electro-Voice app (available for smartphone and tablet). The app allows remote adjustment of DSP settings, input levels, and system diagnostics.

6. Manteniment

6.1 Neteja

Clean the loudspeaker cabinet with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish. Keep the grille free of dust and debris.

6.2 Emmagatzematge

When not in use, store the loudspeakers in a dry, temperate environment, away from direct sunlight and extreme temperatures. Using protective covers (sold separately) is recommended to prevent dust accumulation and minor damage.

7. Solució De Problemes

If you encounter issues with your ZLX-12P-G2 loudspeakers, refer to the following common problems and solutions:

Problema	Causa possible	Solució
Sense sortida de so	No power; input gain too low; master volume too low; incorrect input selection; faulty cable.	Check power connection and switch; increase input gain and master volume; verify input source; test with a different cable.
So distorsionat	Input signal too high (clipping); master volume too high; incorrect DSP settings.	Reduce input gain or source volume; lower master volume; reset DSP settings or adjust EQ.
Problemes de connexió Bluetooth	Device not in pairing mode; loudspeaker already paired to another device; interference.	Ensure loudspeaker is discoverable; disconnect from other devices; move closer to the loudspeaker; restart both devices.
Loudspeaker not powering on	No power from outlet; faulty power cable; internal fault.	Check power outlet with another device; try a different power cable; if problem persists, contact support.

8. Especificacions

Key technical specifications for the Electro-Voice ZLX-12P-G2 Powered Loudspeaker:

Característica	Detall
Número de model	ZLX-12P-G2
Tipus d'altaveu	Altaveu alimentat de 2 vies
Diàmetre del woofer	12 polzades
Diàmetre del Tweeter	1.4 polzades
AmpPoder més viu	1000W Classe D
Interval de freqüència (-10 dB)	48 Hz a 18 kHz
Connectivitat	2x XLR-1/4" Combo Inputs, 3.5mm Aux Input, XLR Mix Out, Bluetooth
Control DSP	1-Knob with LCD Display
Material (tancament)	High-impact polypropylene composite
Dimensions (A x A x P)	Approximately 19"D x 13"W x 12"H (Note: JSON lists D, W, H in a different order)
Pes de l'article	40 lliures
Tipus de muntatge	Floor Standing, Pole-Mounted, Monitor/Kick-Back
Comunicació sense fils	Bluetooth
Mètode de control	On-board DSP, App

Electro-Voice ZLX-12P-G2 Loudspeaker Dimensions — Figure 8.1: Dimensions of the ZLX-12P-G2 loudspeaker, showing approximate height, width, and depth.

9. Garantia i Suport

9.1 Informació de la garantia

The Electro-Voice ZLX-12P-G2 Powered Loudspeaker System is covered by a Garantia limitada del fabricant durant 3 anysAquesta garantia cobreix els defectes de materials i de fabricació en condicions d'ús normal. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.

9.2 Atenció al client

For technical assistance, warranty service, or further inquiries, please contact Electro-Voice customer support through their official website or authorized service centers. Do not attempt to repair the unit yourself, as this may void your warranty.