1. Introducció i finalview
This manual provides essential instructions for the safe and efficient operation of your BITMAIN Antminer S19 90TH/S Bitcoin ASIC Miner. The Antminer S19 is designed for mining SHA256 algorithm-based cryptocurrencies such as Bitcoin (BTC), Bitcoin Cash (BCH), and Bitcoin SV (BSV), offering a high hashrate and air-cooling efficiency.
Please read this manual thoroughly before setting up and operating the device to ensure proper functionality and to prevent damage or injury.
2. Informació de seguretat
- Voltage Requisit: The Antminer S19 requires a 200-240V AC input voltage. Ús d'un volum incorrectetage (e.g., 110V-120V) will likely cause severe damage to the miner and void the warranty.
- Cable d'alimentació: The power cord is NOT included with the unit. Ensure you use a suitable power cord rated for 200-240V and the miner's power consumption (3105W).
- Ventilació: Ensure adequate airflow around the miner. Do not obstruct the intake or exhaust vents. Operate in a well-ventilated area to prevent overheating.
- Medi ambient: Maintain operating temperatures between 32°F (0°C) and 113°F (45°C) and humidity between 10% and 90% (non-condensing).
- Seguretat elèctrica: Always disconnect power before performing any maintenance or inspection. Do not operate the miner if any cables are damaged or if the unit shows signs of physical damage.
3. Product Components and Physical Overview
The Antminer S19 unit consists of the main mining chassis, integrated power supply, and cooling fans. Familiarize yourself with the external features of the device.
Figura 3.1: Frontal view of the Antminer S19. This image displays the overall compact design of the miner, highlighting the cooling fans on one end and the power input ports on the other, with the control board visible on top.
Figura 3.2: Part superior posterior view of the Antminer S19. This image shows the control board with its network port (RJ45), IP Report button, and status indicator lights (Fault, Normal).
Figura 3.3: posterior view of the Antminer S19. This image details the exhaust fans and the dual power input ports, emphasizing the air-cooling system and power connectivity.
4. Instruccions de configuració
4.1 Desembalatge i inspecció
- Carefully remove the Antminer S19 from its packaging.
- Inspect the unit for any signs of physical damage during transit. If damage is found, contact your vendor immediately.
- Ensure all components are present. Note that the power cord is not included.
4.2 Environmental Placement
- Place the miner in a location with stable power supply and good ventilation.
- Ensure the operating temperature is within 32~113°F (0~45°C) and humidity is 10~90% (non-condensing).
- Avoid placing the miner in direct sunlight, near heat sources, or in dusty environments.
4.3 Connexió de potència
- Connect a 200-240V AC power cord (not supplied) to the power input ports on the miner.
- Ensure the power source can provide the required 3105W.
- ADVERTIMENT: Ús incorrecte del voltagi danyarà la unitat.
4.4 Connexió de xarxa
- Connect an Ethernet cable to the RJ45 port on the control board of the miner.
- Connecteu l'altre extrem del cable Ethernet al vostre encaminador o commutador de xarxa.
5. Instruccions de funcionament
5.1 Encès
After connecting power and network, the miner will automatically power on. The status indicator lights on the control board will illuminate.
5.2 Accessing the Miner Interface
- Use an IP scanner tool on your network to find the IP address of the Antminer. Alternatively, press the 'IP Report' button on the control board for 1-5 seconds, and the IP address will be reported to the IP Reporter tool on your computer.
- Obre a web browser and enter the miner's IP address.
- Log in using the default credentials (usually 'root' for both username and password, refer to official BITMAIN documentation for specifics).
5.3 Configuring Mining Settings
- Navigate to the 'Miner Configuration' or 'Settings' section within the web interfície.
- Enter your mining pool URL, worker name, and password. You can typically configure up to three mining pools for redundancy.
- Save the settings. The miner will restart its hashing process with the new configuration.
5.4 Monitorització del rendiment
El web interface provides real-time data on hashrate, temperature, fan speed, and other operational parameters. Regularly monitor these metrics to ensure optimal performance and detect potential issues early.
6. Manteniment
6.1 Neteja
- Regularly inspect the miner for dust accumulation, especially on the fans and heatsinks.
- Before cleaning, always disconnect the power supply.
- Use compressed air to gently remove dust from the fans and internal components. Do not use liquids.
6.2 Control ambiental
Ensure the operating environment remains within the specified temperature and humidity ranges to prevent component degradation and ensure stable operation.
7. Solució De Problemes
- El miner no s'encén: Check power connections and ensure the 200-240V supply is active. Verify the power cord is correctly seated.
- Sense connexió de xarxa: Verify the Ethernet cable is securely connected to both the miner and the router/switch. Check network settings on your router.
- Low Hashrate/No Hashing: Check mining pool configuration in the web interface. Ensure your internet connection is stable. Monitor temperatures; overheating can cause performance throttling.
- Llum indicador d'error: If the 'Fault' light is on, it indicates a hardware issue. Refer to BITMAIN's official troubleshooting guides or contact their support.
For more detailed troubleshooting, refer to the official BITMAIN support resources.
8. Especificacions
| Característica | Especificació |
|---|---|
| Model | S19 |
| Algoritme | Criptomoneda | SHA256 | BTC/BCH/BSV |
| Hashrate | 90 TH/S ± 3% |
| Presa d'alimentació a la paret a 25 °C (77 °F) | 3105 W ± 5% |
| Eficiència energètica a la paret a 25 °C | 34.5 J/TH ± 5% |
| Volum d’entrada de CAtage | 200 ~ 240 V |
| Interval de freqüència d'entrada de CA | 47 ~ 63 Hz |
| Networking Connection Mode | RJ45 Ethernet 10/100M |
| Miner Size (L*W*H, w/o package) | 15.75 x 7.68 x 11.42 polzades |
| Pes net | 33.96 lliures |
| Temperatura de funcionament | 32 ~ 113 °F (0~45 °C) |
| Temperatura d'emmagatzematge | -4~158 °F (-20~70 °C) |
| Operation Humidity (non-condensing) | 10 ~ 90% HR |
| Operació Altitud | ≤2000 m |
| Mètode de refrigeració | Aire |
9. Garantia i Suport
Brand new BITMAIN Antminer units come with warranty coverage directly provided by BITMAIN. For any warranty claims, technical support, or assistance, customers are required to proactively contact BITMAIN's official website. Dedicated personnel at BITMAIN will assist you with product-related inquiries and support.
Please note that the vendor is not responsible for warranty claims; all support and warranty services are handled directly by BITMAIN.
