GAMDIAS ATLAS M1 WH Mid Tower Gaming Computer Case Instruction Manual

1. Introducció

Thank you for choosing the GAMDIAS ATLAS M1 WH Mid Tower Gaming Computer Case. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case. Please read this manual thoroughly before beginning installation to ensure optimal performance and safety.

2. Informació de seguretat

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the case.
• Handle all components with care to prevent damage from static electricity. Consider using an anti-static wrist strap.
• Avoid placing the computer case in direct sunlight, near heat sources, or in areas with high humidity.
• Assegureu-vos que hi hagi una ventilació adequada al voltant de la carcassa per evitar el sobreescalfament.
• Mantingueu les peces petites i els materials d'embalatge fora de l'abast dels nens.
• Do not attempt to modify the case or its components, as this may void your warranty and pose a safety risk.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• GAMDIAS ATLAS M1 WH Mid Tower Gaming Computer Case
• 3 x 120mm ARGB PWM Fans (pre-installed)
• Caixa d'accessoris (cargols, brides de cable, separadors, etc.)
• Manual d'usuari (aquest document)

4. Producte acabatview

The GAMDIAS ATLAS M1 WH is a mid-tower gaming case designed for optimal performance and aesthetics. It features a panoramic tempered glass design, integrated RGB lighting, and an optimized cooling architecture.

Figura 4.1: Frontal view of the GAMDIAS ATLAS M1 WH case with internal components and digital display.

4.1. Pantalla Digital

The case features an embedded monitor that displays real-time system information, including CPU, GPU, and ambient temperatures. Users can switch between display modes via the I/O port or using the ZEUS CAST software.

Figure 4.2: Close-up of the digital display showing temperature readings.

4.2. Concise I/O Design

El panell frontal d'E/S proporciona un accés convenient als ports i controls essencials:

• 1 x USB 3.2 Gen 2 Type-C Port (up to 10 Gbps)
• 1 x port USB 3.0
• Fan LED Control Button
• Interruptor de mode de monitor
• Integrated Audio Jack

Figura 4.3: Detallada view of the front I/O panel.

4.3. Interior Accommodation

The ATLAS M1 WH case offers generous space for various components:

• Motherboard Compatibility: ATX, Micro-ATX, Mini-ITX
• VGA Card Length: Up to 410mm
• Air Cooler Height: Up to 160mm

Figure 4.4: Diagram illustrating interior dimensions and component clearances.

4.4. Storage Compatibility

The case supports flexible storage configurations:

• Up to 4 x 2.5" SSDs
• Alternatively, 3 x 2.5" SSDs + 1 x 3.5" HDD
• Longitud de la PSU: fins a 180 mm

Figura 4.5: Intern view highlighting storage drive and power supply unit mounting areas.

4.5. Cooling Support

The ATLAS M1 WH is designed for efficient cooling with support for multiple fans and radiators:

• Up to 6 fans can be installed.
• Radiator Support: Top (up to 360mm/280mm), Side (up to 240mm), Rear (120mm).

Figure 4.6: Cooling configuration options for fans and radiators.

4.6. Built-in ARGB PWM Fans

The case comes with three pre-installed ARGB PWM fans: two 120mm reverse intake fans on the side and one 120mm fan on the rear exhaust. These fans provide excellent airflow and customizable ARGB visuals via the motherboard or the LED control button.

Figura 4.7: View of the pre-installed ARGB PWM fans within the case.

4.7. Functionality with Seamless Visuals

The ATLAS M1 series features perforated air vents and seamless tempered glass panels, offering both optimal airflow and stunning visual presentation of your build.

Figure 4.8: The ATLAS M1 series design, highlighting seamless tempered glass panels.

4.8. Product Features Video

5. Configuració

Follow these steps to assemble your computer system within the GAMDIAS ATLAS M1 WH case:

5.1. Preparació del cas

1. Col·loqueu la caixa sobre una superfície plana i estable.
2. Remove the tempered glass side panel by gently pulling it open (tool-less design).
3. Remove any internal packaging materials.

5.2. Instal·lació de la placa base

1. Instal·leu la protecció d'E/S (si no està preinstal·lada a la placa base) a l'obertura posterior de la carcassa.
2. Alinea la teva placa base ATX, Micro-ATX o Mini-ITX amb els separadors de l'interior de la carcassa. Assegura't que els separadors coincideixin amb el format de la teva placa base.
3. Fixeu la placa base amb els cargols proporcionats.

5.3. Instal·lació de la font d'alimentació (PSU)

1. Locate the PSU mounting area at the rear bottom of the case.
2. Slide your PSU into the designated bay.
3. Fixeu la font d'alimentació amb els cargols de la part posterior de la carcassa.

5.4. Instal·lació de la unitat d'emmagatzematge

1. For 2.5" SSDs: Mount the drives to the designated SSD trays or mounting points.
2. For 3.5" HDDs: Install the drive into the HDD cage (if applicable) or designated 3.5" mounting points.
3. Fixeu totes les unitats amb els cargols adequats.

5.5. Instal·lació de la targeta gràfica (GPU)

1. Traieu les cobertes de les ranures PCIe necessàries de la part posterior de la carcassa.
2. Insert your GPU into the appropriate PCIe slot on the motherboard.
3. Secure the GPU with screws or the retention clip.
4. The case supports both horizontal and vertical GPU mounting (vertical mount requires a separate riser cable, not included).

5.6. Cables de connexió

1. Connect all power cables from the PSU to the motherboard, GPU, and storage drives.
2. Connect the front panel I/O cables (USB, audio, power switch, reset switch, LED indicators) to their respective headers on the motherboard.
3. Connect the pre-installed fan cables to the motherboard fan headers or the built-in SATA-powered fan hub.
4. Utilize the cable management routes and tie-downs behind the motherboard tray to keep cables organized and improve airflow.

6. Funcionament

6.1. Encès

Once all components are installed and cables are connected, close the side panel. Connect the power cable to the PSU and a wall outlet, then press the power button on the front I/O panel.

6.2. Digital Display Control

The digital display on the front of the case shows real-time temperature data. Use the dedicated button on the I/O panel to cycle through CPU temperature, GPU temperature, and ambient temperature displays. For advanced control and customization, install the GAMDIAS ZEUS CAST software.

6.3. Control d'il·luminació ARGB

Els ventiladors ARGB preinstal·lats es poden controlar de dues maneres:

• Sincronització de la placa base: Connect the ARGB cables to a compatible 5V 3-pin ARGB header on your motherboard and use your motherboard's RGB software for synchronization and effects.
• Case Control: Use the LED control button on the front I/O panel to cycle through various pre-set lighting effects and colors if not connected to a motherboard ARGB header.

7. Manteniment

Regular maintenance helps ensure the longevity and optimal performance of your computer system.

• Neteja del filtre de pols: The case includes magnetic dust filters on the top and bottom. Regularly remove and clean these filters with water and mild soap, or simply brush off accumulated dust. Ensure they are completely dry before reattaching.
• Neteja de caixa: Utilitzeu un suau, damp cloth to wipe down the exterior of the case. For tempered glass panels, use a glass cleaner and a microfiber cloth to avoid streaks. Avoid abrasive cleaners or solvents.
• Eliminació de pols interna: Periodically use compressed air to clear dust from internal components, especially fan blades and heatsinks. Ensure the system is powered off and unplugged before performing internal cleaning.

8. Solució De Problemes

If you encounter issues with your GAMDIAS ATLAS M1 WH case, refer to the following common problems and solutions:

• Sense energia:
  • Assegureu-vos que la font d'alimentació estigui connectada correctament a la presa de corrent i que l'interruptor d'alimentació de la font d'alimentació estigui en la posició "ON".
  • Verifiqueu que el cable de l'interruptor d'alimentació del panell frontal estigui connectat correctament a la placa base.
• Els ventiladors no giren / Els RGB no funcionen:
  • Check if the fan power cables are securely connected to the motherboard or the fan hub.
  • Ensure the ARGB cables are connected to a compatible 5V 3-pin ARGB header on the motherboard or the case's internal controller.
  • If using motherboard software, ensure it is installed and configured correctly.
• La pantalla digital no funciona:
  • Verify that the display's power and data cables are correctly connected to the motherboard.
  • Ensure the ZEUS CAST software is installed and running.
• Sobreescalfament:
  • Ensure all case fans are spinning correctly and oriented for optimal airflow (intake/exhaust).
  • Clean any dust filters and internal components to improve air circulation.
  • Verify that CPU and GPU coolers are properly installed and functioning.

For further assistance, please contact GAMDIAS customer support.

9. Especificacions

10. Garantia i Suport

Per obtenir informació sobre la garantia i assistència tècnica, consulteu la pàgina oficial de GAMDIAS. weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.

Oficial de GAMDIAS Weblloc: www.gamdias.com