1. Introducció
Thank you for choosing the WORKPRO 7.2V Electric Pruning Shears. This manual provides essential information for the safe operation, maintenance, and care of your new tool. Please read it thoroughly before first use and retain it for future reference.
Imatge 1.1: acabatview of the WORKPRO 7.2V Electric Pruning Shears and its USB-C charging cable.
2. Informació de seguretat
Prioritzeu sempre la seguretat quan feu servir eines elèctriques. Si no seguiu aquestes instruccions, podeu patir descàrregues elèctriques, incendis i/o lesions greus.
Advertències generals de seguretat:
- Llegeix totes les instruccions: Familiaritzeu-vos amb el funcionament i les característiques de seguretat de l'eina.
- Mantingueu la zona de treball neta: Les zones desordenades o fosques conviden a accidents.
- Eviteu entorns perillosos: No utilitzeu eines elèctriques a damp o llocs humits, o exposar-los a la pluja.
- Utilitzeu l'equip de protecció individual (EPI) adequat: Always wear safety glasses, gloves, and sturdy footwear.
- Estigueu alerta: Pay attention to what you are doing and use common sense. Do not operate the tool when tired or under the influence of drugs, alcohol, or medication.
- Assegureu la peça de treball: Utilitzeu clamps or other practical ways to secure the workpiece to a stable platform.
- No sobrepasseu: Mantenir un bon peu i un equilibri en tot moment.
- Eines d'inactivitat de la botiga: Quan no s'utilitzin, les eines s'han de guardar en un lloc sec, alt o tancat amb clau, fora de l'abast dels nens.
- Mantingueu les eines amb cura: Mantingueu les eines de tall afilades i netes per a un rendiment millor i més segur. Seguiu les instruccions per lubricar i canviar accessoris.
- Comproveu les peces danyades: Abans d'utilitzar-lo de nou, cal comprovar acuradament un protector o altra peça que estigui danyada per determinar que funcionarà correctament i durà a terme la seva funció prevista.
Specific Pruner Safety:
- Blade Hazard: The blades are extremely sharp. Keep fingers and body parts away from the blades during operation.
- Dual Switch Operation: This tool features a dual-action switch for safety. Both the main trigger and the safety switch must be pressed simultaneously to operate the blades. Keep the switch pressed throughout the cutting operation.
- Desconnecteu quan no estigui en ús: Always disconnect the charging cable when the tool is not in use, before servicing, or when changing accessories.
- Seguretat de la bateria: Use only the specified charging method. Do not incinerate the battery or expose it to high temperatures.
3. Producte acabatview i Components
The WORKPRO 7.2V Electric Pruning Shears are designed for efficient and effortless pruning tasks. Key features include:
- High-Quality SK5 Blades: Durable and sharp for clean cuts.
- Motor eficient: Provides powerful performance with reduced noise.
- Llum LED incorporada: Illuminates the cutting area for improved visibility in low light.
- Disseny lleuger: Weighs approximately 1.9 pounds (0.86 kg) for comfortable, extended use.
- Dual Safety Switch: Evita l'activació accidental.
- Capacitat màxima de tall: 20mm (0.8 inches) for fresh branches.
Imatge 3.1: Detallada view highlighting the maximum cutting capacity, special gear system, constant light, and safety protection features.
Image 3.2: Close-up of the SK5 blade, designed for smooth cuts without damaging bark.
Image 3.3: Illustration of the internal powerful motor, indicating high efficiency and strong load capacity.
4. Configuració
Càrrega de la bateria:
- Ensure the pruning shears are turned off.
- Locate the Type-C charging port on the tool.
- Connect the provided USB-C charging cable to the port on the shears and plug the other end into a compatible USB power adapter (not included) or a USB port.
- El llum indicador de càrrega mostrarà l'estat de la càrrega. Una càrrega completa sol trigar entre 4 i 5 hores.
- Un cop estigui completament carregat, desconnecteu el cable de càrrega.
The tool is equipped with two 3.6V, 2000mAh Lithium-Ion batteries.
5. Instruccions de funcionament
Activating the Shears:
- Assegureu-vos que la bateria estigui carregada.
- To activate the shears, first press the main trigger, then simultaneously press the safety switch located on the handle.
- Keep both switches depressed throughout the cutting operation. Releasing either switch will cause the blades to open immediately and the tool to stop.
Image 5.1: Proper hand placement for operating the dual safety switch, ensuring safe activation.
Procediment de tall:
- Col·loqueu la branca que voleu tallar entre les fulles obertes.
- Ensure the branch diameter does not exceed 20mm (0.8 inches) for fresh branches. Attempting to cut thicker branches may damage the tool or result in an incomplete cut.
- Activate the shears as described above. The blades will close to make the cut.
- Release the switches to allow the blades to open for the next cut.
- For slightly thicker branches within the tool's capacity, multiple 'bites' can be taken to gradually cut through.
Image 5.2: Visual representation of the 20mm (0.8 inch) maximum cutting diameter for effective pruning.
Aplicacions:
These electric pruning shears are suitable for a variety of gardening tasks, including:
- Pruning trees and shrubs
- Pruning fruit trees
- Pruning grapevines
- Pruning flowers and ornamental plants
- General garden and landscape maintenance
- Harvesting fruit
Imatge 5.3: Ex.amples of multiple uses for the electric pruning shears in different gardening scenarios.
6. Manteniment
Un manteniment regular garanteix la longevitat i el rendiment òptim de les teves tisores de podar.
- Neteja de fulles: After each use, wipe the blades clean with a damp cloth to remove sap, dirt, and debris. For stubborn residue, use a mild cleaning solution. Ensure blades are dry before storage.
- Lubricació de la fulla: Periodically apply a light coat of machine oil or specialized blade lubricant to the cutting blades to prevent rust and ensure smooth operation.
- Emmagatzematge: Store the pruning shears in a dry, secure location, away from direct sunlight and extreme temperatures. Ensure the safety switch is engaged and the blades are closed.
- Cura de la bateria: Do not store the tool with a completely discharged battery. Recharge the battery periodically if the tool is not used for extended periods.
7. Solució De Problemes
If you encounter issues with your WORKPRO Electric Pruning Shears, refer to the following common troubleshooting steps:
| Problema | Causa possible | Solució |
|---|---|---|
| Shears do not turn on/operate | La bateria està descarregada Interruptor de seguretat no activat Main trigger not pressed | Carregueu la bateria completament Ensure both main trigger and safety switch are pressed simultaneously Check charging cable connection |
| Blades do not cut cleanly or get stuck | Les fulles estan mates o brutes Cutting branches too thick Sap or debris buildup | Clean and lubricate blades; consider professional sharpening if severely dull Ensure branch diameter is within 20mm (0.8 inches) capacity Netegeu bé les fulles després de cada ús |
| Tool stops unexpectedly (freezes up) | Protecció de sobrecàrrega activada Bateria baixa Problema intern | Release switches, allow tool to cool, then restart. Avoid forcing cuts on overly thick branches. Recarregar la bateria. Si el problema persisteix, contacteu amb l'atenció al client. |
| La bateria no es carrega | Charging cable or adapter faulty Charging port dirty Problema amb la bateria | Prova un cable USB-C i un adaptador de corrent diferents Clean charging port gently Contact customer support if battery is suspected to be faulty |
8. Especificacions
| Característica | Especificació |
|---|---|
| Marca | WORKPRO |
| Número de model | W159049AE |
| Font d'alimentació | Funciona amb bateria |
| Voltage | 7.2 Volts |
| Wattage | 7.4 watts-hora |
| Tipus de bateria | 2 bateries d'ions de liti (incloses) |
| Material de la fulla | SK5 Metal |
| Material del mànec | Plastic, Nylon |
| Diàmetre màxim de tall | 20 mm (0.8 polzades) |
| Pes de l'article | 1.9 lliures (aprox. 0.86 kg) |
| Port de càrrega | Tipus-C |
| UPC | 820909605089 |
9. Garantia i Suport
WORKPRO is committed to providing a positive customer experience. If you have any questions, concerns, or require assistance with your WORKPRO tools, please contact our customer support. Refer to your purchase documentation for specific warranty details and contact information.
For further assistance, please visit the official WORKPRO weblloc web o contacteu directament amb el venedor.
