FITUEYES Hand Crank Lift TV Stand with Wheels

Introducció

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your FITUEYES Hand Crank Lift TV Stand with Wheels. Please read this manual thoroughly before installation and use to ensure safe and correct operation. Keep this manual for future reference.

Image: The FITUEYES Hand Crank Lift TV Stand with Wheels, shown with a television mounted, in a modern room setting.

Informació de seguretat

Please observe the following safety precautions to prevent injury or damage to your product and property:

• Assegureu-vos que tots els components siguin presents i no estiguin danyats abans del muntatge. No utilitzeu el producte si hi falta alguna peça o si és defectuosa.
• No supereu la capacitat de càrrega màxima de 88 lliures (40 kg).
• This TV stand is designed for TVs between 32 and 75 inches. Verify your TV's VESA pattern is compatible (200x200mm to 600x400mm).
• Always have at least two people for assembly and when mounting or dismounting the TV.
• Ensure the wheels are locked when the stand is in a stationary position to prevent accidental movement.
• Keep children and pets away from the TV stand during assembly and operation.
• Avoid placing heavy objects on the TV stand's base that could obstruct movement or cause instability.

Contingut del paquet

Before beginning assembly, verify that all parts listed below are included in your package. If any parts are missing or damaged, please contact customer support.

Image: An exploded diagram illustrating all components of the TV stand, including the base, central column, TV mounting plate, VESA adapter arms, hand crank, and various fasteners and tools. Key dimensions and VESA compatibility are also shown.

El paquet normalment inclou:

• Base with pre-installed wheels
• Central column (height adjustable)
• TV mounting plate
• VESA extension brackets (if needed for larger VESA patterns)
• Hand crank for height adjustment
• Various screws, washers, and spacers for TV mounting
• Assembly tools (e.g., Allen wrench, spanner)

Instruccions de muntatge i muntatge

Follow these steps carefully for proper assembly. It is recommended to have a second person assist with the assembly process, especially when handling the TV.

1. Fixeu les rodes a la base: If not pre-installed, screw the four lockable wheels into the designated holes on the bottom of the base. Ensure they are tightened securely.
2. Connect Column to Base: Align the central column with the mounting holes on the base. Ensure the correct orientation (refer to the video for hexagonal vs. round holes). Secure the column to the base using the provided screws and Allen wrench.
3. Insert Hand Crank: Carefully insert the hand crank into the designated opening on the central column. Ensure it is not pushed through the column entirely, but seated correctly to engage the lifting mechanism.
4. Fixeu la placa de muntatge del televisor: Secure the TV mounting plate to the top of the central column using the provided screws. Before fully tightening, adjust the tilt angle if desired, then secure the screws.
5. Install VESA Brackets: Attach the VESA brackets to the back of your television using the appropriate screws, washers, and spacers for your TV model. Ensure the brackets are securely fastened and evenly spaced.
6. Muntar el televisor al suport: With assistance, carefully lift your TV and hook the VESA brackets onto the TV mounting plate on the stand. Ensure the TV is centered and level. Secure the TV to the stand using the safety screws or locking mechanisms at the bottom of the VESA brackets.

Instruccions de funcionament

This section details how to adjust and use your FITUEYES TV stand.

Ajust d'alçada

The TV stand features a hand crank mechanism for smooth and effortless height adjustment without needing to remove your TV.

• To raise the TV, turn the hand crank clockwise.
• To lower the TV, turn the hand crank counter-clockwise.
• The height can be adjusted from 38 inches to 59.6 inches (from the floor to the center of the TV mounting plate).

Image: The TV stand illustrating the stepless height adjustment feature, showing the TV at its maximum and minimum height settings.

Ajust d'inclinació

The TV mounting plate allows for a tilt adjustment of 0° to 10°.

• To adjust the tilt, loosen the tilt adjustment screws on the sides of the mounting plate.
• Ajusteu el televisor a l'angle desitjat.
• Tighten the tilt adjustment screws firmly to secure the TV in place.

Image: The TV stand demonstrating the tilt function, showing the TV angled upwards by 10 degrees.

Ajust giratori

The TV stand allows for a swivel adjustment of ±30°.

• Gently rotate the TV to the left or right to achieve your desired viewangle de ing.
• No locking mechanism is typically required for swivel, as it is designed for fluid movement.

Image: The TV stand demonstrating the swivel function, showing the TV rotated to the side for an ultra-wide viewangle de ing.

Rodes amb bloqueig

The four high-quality PU wheels are lockable to ensure stability when the stand is stationary.

• To move the TV stand, unlock all four wheels by pressing the lever on each wheel upwards.
• To secure the TV stand in place, push the lever on each wheel downwards to lock them.

Manteniment

Regular maintenance helps prolong the life and appearance of your TV stand.

• Neteja: Netegeu el suport amb un drap suauamp drap. Eviteu productes de neteja abrasius o dissolvents que puguin danyar l'acabat.
• Elements de fixació: Reviseu periòdicament tots els cargols i perns per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
• Parts mòbils: The hand crank mechanism and wheels are designed for durability. If you notice any stiffness, ensure no debris is obstructing their movement.
• Gestió de cables: Utilize the integrated cable management features to keep cables tidy and prevent tripping hazards.

Image: The TV stand demonstrating effective cable management, with cables neatly organized along the central column.

Resolució de problemes

Si teniu algun problema, consulteu els següents problemes i solucions habituals:

• El televisor no està anivellat: Check that the VESA brackets are installed evenly on the back of the TV and that the TV mounting plate is securely fastened to the column. Adjust as needed.
• Hand crank is stiff or not adjusting height: Ensure the hand crank is fully inserted and engaged with the lifting mechanism. Check for any obstructions in the column. Do not force the crank.
• Wheels are not locking/unlocking: Verify that the locking levers on each wheel are fully engaged or disengaged. Clean any debris from the wheel mechanisms.
• La posició de suport es nota inestable: Ensure all assembly screws are tightened securely. Do not exceed the maximum weight capacity of the stand. Distribute the TV's weight evenly.
• Peces que falten: If any parts were missing upon delivery, contact FITUEYES customer support immediately for replacements.

Especificacions

Garantia i Suport

FITUEYES products are designed for quality and durability. For specific warranty information regarding your product, please refer to the warranty card included in your package or visit the official FITUEYES website. If you require technical assistance, have questions about assembly, or need to report a missing/damaged part, please contact FITUEYES customer support.

You can typically find contact information on the product packaging, the official brand weblloc web o a través del vostre distribuïdor.