Producte acabatview
The Tonitrui Silent Ball Catch is an innovative solution designed to securely hold doors in place while eliminating the noise associated with traditional ball catches. Utilizing a strong magnetic mechanism, this product ensures quiet operation and enhanced durability compared to conventional mechanical latches. Its adjustable design allows for versatile application across various door thicknesses and types.
Figure 1: Components of the Tonitrui Silent Ball Catch, including the magnetic catch units, corresponding strike plates, and mounting screws.
Característiques clau
- Strong Magnetic Hold: The built-in high-strength magnet firmly secures doors, offering greater closing force than traditional ball catches.
- Funcionament silenciós: The magnetic mechanism eliminates noise during door opening and closing, providing a quieter environment.
- Durabilitat millorada: Reduced mechanical wear extends the product's lifespan.
- Dual Adjustable Design:
- Length adjustment via a rotating lock buckle on the brass pillar to adapt to different door and frame thicknesses.
- Retraction distance adjustment by rotating the copper plate at the bottom for optimal closing.
- Easy Installation & Replacement: Designed to match the size of old door ball latches for straightforward replacement without modifications.
Figure 2: Illustration of the magnetic catch's working principle, demonstrating how the internal magnet retracts when the door is open and extends to attract the strike plate when the door is closed, ensuring a secure hold.
Guia d'instal·lació
Follow these steps for proper installation of your Silent Ball Catch. The design allows for easy replacement of existing ball latches.
- Prepara la porta: Drill a hole at least 0.6 inches deep around the edge of the door where the catch will be installed. Ensure the hole is clean and free of debris.
- Install the Magnetic Unit: Place the magnetic catch unit into the prepared hole. Secure it firmly with the provided screws.
- Instal·leu la placa de tancament: Fix the flat iron strike plate on the opposite side of the door frame, aligning it with the magnetic unit. Ensure it is flush and securely screwed in.
- Adjust the Gap: After initial installation, use the provided key (or a suitable tool) to adjust the product gap. Rotate the brass pillar to adjust the length and the copper plate at the bottom to fine-tune the retraction distance. Aim for a distance of 0.2-0.5mm between the magnet and the strike plate when the door is closed for optimal silent operation and secure closure.
- Prova de funcionament: Open and close the door several times to ensure smooth and silent operation, and that the door remains securely closed.
Figure 3: Visual guide for the installation process, from drilling the initial hole to securing and adjusting the magnetic catch and strike plate.
Figure 4: The magnetic catch can be adjusted using a key after installation to achieve the desired fit and silent operation.
Instruccions de funcionament
The Silent Ball Catch operates automatically. When the door is opened, the internal magnet retracts. As the door closes, the magnet extends to attract the metal strike plate, holding the door firmly in position without a loud click or resistance.
Figure 5: The Silent Door Touch in use, demonstrating its seamless and quiet operation for various door types.
Aplicacions
This product is suitable for various door types, including:
- Room Doors
- Closet Doors
- Portes Corredisses
Manteniment
The Tonitrui Silent Ball Catch requires minimal maintenance due to its durable magnetic design. Periodically check the screws for tightness and ensure the strike plate is clean and free of obstructions. No lubrication is required.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La porta no tanca bé. | Magnet not extending far enough; misalignment of components. | Adjust the length of the magnetic unit using the rotating lock buckle. Ensure the strike plate is perfectly aligned with the magnet. |
| Loud clicking sound when closing. | Magnet hitting the strike plate too hard; insufficient gap. | Adjust the retraction distance by rotating the copper plate at the bottom of the magnetic unit. Aim for a small gap (0.2-0.5mm) when closed. |
| Components feel loose. | Els cargols de muntatge estan solts. | Tighten all mounting screws on both the magnetic unit and the strike plate. |
Especificacions
- Número de model: JC
- Fabricant: cilinwan
- Dimensions del producte: 10 x 4.49 x 0.5 polzades
- Pes de l'article: 4 unces
- Color: Silver (as per current product variant)
- Components inclosos: Cargols
- País d'origen: Xina
