1. Introducció
Thank you for choosing the WORKPRO Cordless Grass Shear & Shrubbery Trimmer & Weed Puller Tool. This versatile 2-in-1 tool is designed for efficient and convenient maintenance of your lawn, hedges, and garden edges, complemented by a durable weed puller for effortless weed removal. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your tool.
Figure 1.1: WORKPRO Cordless Grass Shear & Shrubbery Trimmer and Weed Puller Tool.
2. Instruccions de seguretat
Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury. Read all instructions carefully before operation.
- Seguretat personal: Always wear appropriate personal protective equipment, including safety glasses, gloves, and sturdy footwear. Keep long hair tied back and avoid loose clothing that could get caught in moving parts.
- Seguretat de l'àrea de treball: Keep the work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep children and bystanders away while operating the tool.
- Seguretat elèctrica: Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the tool. Do not expose power tools to rain or wet conditions.
- Ús i cura de l'eina: Do not force the tool. Use the correct tool for your application. Disconnect the battery pack from the tool before making any adjustments, changing accessories, or storing power tools. Store idle tools out of the reach of children.
- Seguretat de la fulla: Blades are sharp. Handle with extreme care. Always ensure blades are securely attached before operation. Never touch blades while the tool is running.
- Ús i cura de la bateria: Recharge only with the charger specified by the manufacturer. Do not use a battery pack or tool that is damaged or modified.
3. Contingut del paquet
Carefully unpack all items and check against the list below. If any parts are missing or damaged, contact WORKPRO customer service.
- 1 x Cordless Grass Shear & Shrubbery Trimmer Unit
- 1 x Shrub Blade (5.9 inches / 150mm)
- 1 x Grass Cutter Blade (4.17 inches / 106mm)
- 1 x Type-C Charging Cable (1M)
- 1 x Weed Puller Tool
- 1 x Manual d'usuari
4. Producte acabatview & Components
4.1 Cordless Grass Shear & Shrubbery Trimmer
Figure 4.1: Key components of the Cordless Grass Shear & Shrubbery Trimmer.
- Presa de càrrega tipus C: Port for connecting the Type-C charging cable.
- Charger LED Indicator: Indica l'estat de càrrega.
- Botó de bloqueig de seguretat: Must be pressed before the ON/OFF switch can be activated.
- TPR Anti-Slip Handle: Dissenyat ergonòmicament per a una subjecció còmoda i segura.
- Interruptor ON / OFF: Activates or deactivates the motor.
- Shrub Blade: Longer blade for trimming shrubs and hedges.
- Grass Cutter Blade: Shorter, wider blade for shearing grass.
- Botó d'alliberament de la fulla: Used to detach and change blades.
- Type-C Cable (1M): For charging the trimmer's battery.
Figure 4.2: The trimmer features an upgraded 1100rpm motor and a 2000mAh Lithium-ion battery for extended operation.
4.2 Weed Puller Tool
Figure 4.3: Key features of the WORKPRO Weed Puller Tool.
- Ash Wood Handle: Provides a comfortable grip and helps relieve wrist fatigue during use.
- Leverage Metal Base: Designed to rest on the ground, providing leverage to easily pull weeds.
- V-Shaped Fork: Allows for deep digging to effectively extract the entire root of the weed.
5. Configuració
5.1 Càrrega de la talladora
- Locate the Type-C charging socket on the trimmer unit.
- Connect the provided Type-C charging cable to the socket.
- Plug the other end of the cable into a suitable USB power adapter (not included) or a USB port.
- The Charger LED Indicator will illuminate to show charging status. Allow sufficient time for a full charge before first use (approximately 80 minutes no-load operation time on a full charge).
5.2 Attaching and Changing Blades
The trimmer comes with two interchangeable blades: a grass cutter blade and a shrub blade.
- To Remove a Blade: Ensure the trimmer is OFF. Press the Blade Release Button firmly and slide the blade off the unit.
- Per connectar una fulla: Align the desired blade with the slot on the trimmer unit. Slide the blade onto the unit until it clicks securely into place. Ensure it is firmly seated before operation.
Figure 5.1: The 2-in-1 design allows quick switching between grass shearing and hedge trimming modes.
6. Instruccions de funcionament
6.1 Using the Cordless Grass Shear
Attach the Grass Cutter Blade for this operation.
- Ensure the battery is charged and the grass cutter blade is securely attached.
- Hold the trimmer firmly by the TPR Anti-Slip Handle.
- Press the Safety Lock-off Button, then press the ON/OFF Switch to start the trimmer.
- Guide the trimmer along the edges of your lawn or around obstacles to trim grass. The maximum cutting width is 4.17 inches (106mm).
- Release the ON/OFF Switch to stop the trimmer.
6.2 Using the Cordless Shrubbery Trimmer
Attach the Shrub Blade for this operation.
- Ensure the battery is charged and the shrub blade is securely attached.
- Hold the trimmer firmly by the TPR Anti-Slip Handle.
- Press the Safety Lock-off Button, then press the ON/OFF Switch to start the trimmer.
- Carefully guide the trimmer along the shrubs or hedges you wish to trim. The maximum cutting length is 5.90 inches (150mm) and maximum cutting thickness is 0.31 inches (7.95mm).
- Release the ON/OFF Switch to stop the trimmer.
Figure 6.1: The trimmer weighs only 0.82 pounds, reducing hand fatigue for longer use.
6.3 Using the Weed Puller Tool
The weed puller is designed for easy and effective removal of weeds, including those with deep roots.
- Position the V-Shaped Fork of the weed puller around the base of the weed, aiming to get as close to the root as possible.
- Rest the Leverage Metal Base on the ground.
- Apply downward pressure on the handle while simultaneously leveraging the tool against the ground. This action will cause the V-shaped fork to dig around and under the weed's root system.
- Gently pull the handle upwards to pry the weed and its roots out of the soil.
- Discard the weed appropriately.
Figure 6.2: Step-by-step process for using the weed puller tool.
Figure 6.3: The weed puller is versatile for various gardening tasks.
7. Manteniment
Regular maintenance ensures the longevity and optimal performance of your WORKPRO tools.
- Neteja de fulles: After each use, especially when trimming sap-producing plants, clean the blades with a damp cloth to remove debris. For stubborn residue, a mild detergent or blade cleaner can be used. Ensure blades are dry before storage.
- Lubricació de la fulla: Periodically apply a light machine oil or silicone spray to the blades to prevent rust and ensure smooth operation.
- Weed Puller Cleaning: Wipe the stainless steel components of the weed puller clean after each use. The stainless steel material is rust-resistant, but cleaning will maintain its appearance and function.
- Emmagatzematge: Store the tools in a dry, cool place, away from direct sunlight and moisture. Keep out of reach of children. Ensure the trimmer's battery is partially charged (not fully depleted or fully charged) if storing for extended periods.
- Cura de la bateria: Do not store the battery in extreme temperatures. Avoid fully discharging the battery frequently to prolong its lifespan.
8. Solució De Problemes
If you encounter issues with your WORKPRO tool, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La retalladora no s'engega. | La bateria està baixa o esgotada. Safety lock-off button not pressed. Blade not properly installed. | Carregueu la bateria completament. Ensure the safety lock-off button is pressed before the ON/OFF switch. Re-install the blade, ensuring it clicks into place. |
| Les fulles no tallen eficaçment. | Les fulles estan esmolades o brutes. Material being cut is too thick. | Clean blades and lubricate. Consider replacing blades if excessively dull. Ensure material thickness is within specifications (max 0.31 inches for shrub blade). |
| La desbrossadora s'atura durant el funcionament. | La bateria és baixa. Protecció de sobrecàrrega activada. | Recarregueu la bateria. Reduce the load on the trimmer. Allow the motor to cool down if it feels hot. |
| Weed puller is difficult to use. | Soil is too dry or compacted. Incorrect leverage technique. | Water the area slightly before use to soften the soil. Ensure the metal base is firmly on the ground and you are leveraging correctly. |
If the problem persists after attempting these solutions, please contact WORKPRO customer support.
9. Especificacions
| Característica | Especificació |
|---|---|
| Marca | WORKPRO |
| Número de model | W159020A |
| Font d'alimentació | Funciona amb bateria |
| Tipus de bateria | 2000mAh Ió de liti |
| No Load Operation Time | Fins a 80 minuts |
| Velocitat del motor | 1100 rpm (Upgraded High Speed) |
| Trimmer Weight | 0.82 lliures (aprox. 0.37 kg) |
| Color | Verd |
| Material de la fulla | Acer inoxidable |
| Amplada de tall de cisalla d'herba | 4.17 polzades (106 mm) |
| Shrub Shear Cutting Length | 5.90 polzades (150 mm) |
| Shrub Shear Max Cutting Thickness | 0.31 polzades (7.95 mm) |
| Weed Puller Material | High hardness polished Stainless Steel with Ash Wood Handle |
10. Garantia i assistència
WORKPRO products are manufactured to high-quality standards and are warranted against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official WORKPRO weblloc.
For technical support, replacement parts, or any inquiries regarding your product, please contact WORKPRO customer service through their official channels. Please have your model number (W159020A) and purchase information ready when contacting support.
