FLAMMA FX50 Portable Guitar Multi-Effects Pedal

1. Introducció

The FLAMMA FX50 is a compact and versatile multi-effects pedal designed for guitarists. It integrates a wide range of effects, drum rhythms, and a tuner into a portable unit, suitable for practice, recording, and small gigs. This manual provides detailed instructions to help you get the most out of your FX50 pedal.

2. Producte acabatview

The FX50 features an intuitive layout with dedicated knobs for various effects and functions. Below is an overview of the pedal's main components and controls.

Figure 1: FLAMMA FX50 Portable Guitar Multi-Effects Pedal

Controls i connexions:

• Mando VOL: Ajusta el volum de sortida general.
• Botó MOD: Selects and adjusts modulation effects (Chorus, Flanger, Phaser, Tremolo).
• Pom DLY/REV: Selects and adjusts delay and reverb effects (Echo, Room, Hall, Delay).
• DRUM/VALUE Knob: Selects drum rhythms and adjusts their volume. Press and hold for Tuner function.
• Mando GAIN: Adjusts the gain level for drive effects.
• Maneta DRIVE: Selects and adjusts various drive effects (Distortion, Overdrive, Crunch, Fuzz, Clean).
• Mando de TONE: Adjusts the overall tone, from bass-heavy to treble-heavy.
• Patch Buttons: Navigates through preset and user patches.
• Botó de botiga: Saves user-defined patches.
• Interruptor d'alimentació: Encén/apaga la unitat.
• Cab Sim Switch: Toggles cabinet simulation on/off.
• Presa DC IN: For 9V DC power adapter.
• TELÈFONS Jack: 1/8" stereo audio jack for headphones.
• Presa de SORTIDA: 1/4" mono audio jack for connecting to a guitar ampmés viu.
• Jack d'entrada AUX: 1/8" stereo audio jack for connecting external music players.
• Jack d'ENTRADA: 1/4" mono audio jack for connecting your guitar.

Figure 2: FLAMMA FX50 Input/Output Jacks

3. Configuració

3.1 Font d'alimentació

The FX50 can be powered by either a DC 9V adapter (included) or two AAA batteries (not included).

• DC 9V Adapter: Connect the included 9V DC adapter to the DC IN jack. Ensure the adapter's plug polarity is positive on the barrel and negative in the center.
• Bateries: To use batteries, open the battery compartment on the back of the pedal and insert two AAA batteries, observing the correct polarity.

Figure 3: Power Options (Corded and Battery)

3.2 Connecting Your Gear

1. Connexió de guitarra: Connect your electric guitar to the Jack d'ENTRADA using a 1/4" mono audio cable.
2. Connexió de sortida:
   • For headphones, connect to the TELÈFONS Jack (1/8" stereo audio jack).
   • Per a un amplifier, connect to the Jack de SORTIDA (1/4" mono audio jack).
3. External Music Player: Connect an external music player (e.g., smartphone, MP3 player) to the AUX In Jack (1/8" stereo audio jack) to play along with backing tracks.

4. Instruccions de funcionament

4.1 Encès/Apagat

Gira el Interruptor d'alimentació to the 'On' position to power on the unit. Flip it to 'Off' to power down.

4.2 Control de volum

Ajusteu el Pom VOL to set the desired output volume. This controls the overall loudness of your guitar signal and any active effects.

4.3 Effects Modules

The FX50 features 5 effects modules with a total of 15 effects. Each module has a dedicated knob to select and adjust the effect intensity.

• MOD (modulació): Gireu el MOD Knob to select between Chorus (CH), Flanger (FL), Phaser (PH), and Tremolo (TR) effects. The position of the knob also adjusts the intensity of the selected effect.
• DLY/REV (Delay/Reverb): Gireu el DLY/REV Knob to select between Echo, Room, Hall, and Delay effects. The knob position also controls the intensity of the selected effect.
• CONDUIR: Gireu el Manilla de CONDUCCIÓ to select between Distortion (DS), Overdrive (OD), Crunch (CR), Fuzz (FZ), and Clean (CL) tones. The knob position adjusts the intensity of the drive.
• GUANY: Utilitza el POM GAIN to fine-tune the input gain for the drive effects.
• TO: Utilitza el Pom TONE to adjust the overall tonal character, from darker (bass-heavy) to brighter (treble-heavy).
• Sim de la cabina: Utilitza el Cab Sim Switch to toggle cabinet simulation on or off. This is particularly useful when connecting directly to a mixer or audio interface for a more natural ampso lificat.

Figure 4: Modulation and Delay/Reverb Controls

4.4 Drum Machine

The FX50 includes a drum machine with 40 rhythms and a tempo range of 60-270 BPM.

1. Select Drum Rhythm: Premeu el botó DRUM/VALUE Knob to enter Drum status. Rotate the knob to select a rhythm type (01-40).
2. Adjust Drum Rhythm Volume: Premeu el botó DRUM/VALUE Knob again. Rotate the knob to change the rhythm volume (00-09).
3. Start/Stop Drum Machine: Use the dedicated Play/Pause button to start or stop the drum rhythm.

Figure 5: Drum Rhythm Selection

Figure 6: Drum Rhythm Table

4.5 Patches

The FX50 offers 32 patches: 16 preset patches and 16 user patches. These allow you to save and recall your favorite effect combinations and settings.

• Select Patch: Utilitza el Patch Buttons to cycle through the available patches.
• Store Patch: After adjusting effects to your preference, press the Botó de botiga to save your settings to a user patch location.

Figure 7: 32 Patches Overview

4.6 Funció d'afinador

The built-in tuner allows for precise tuning of your guitar.

1. Activate Tuner: Manteniu premut el botó DRUM/VALUE Knob for approximately 2 seconds to access the tuner mode.
2. Tune Guitar: Play a single string. The display will show the current pitch (A-G) and indicate whether the note is flat, correct, or sharp. Adjust your guitar's tuning pegs until the display shows a correct pitch.
3. Exit Tuner: Premeu el botó DRUM/VALUE Knob again to exit tuner mode.

Figure 8: Tuner Display

5. Manteniment

To ensure the longevity and optimal performance of your FLAMMA FX50 pedal, follow these maintenance guidelines:

• Neteja: Feu servir un drap suau i sec per netejar la superfície del pedal. Eviteu utilitzar netejadors o dissolvents abrasius.
• Emmagatzematge: Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries to prevent leakage.
• Substitució de la bateria: When the pedal's performance degrades or the power indicator light dims, replace the AAA batteries. Ensure correct polarity when inserting new batteries.
• Manipulació: Avoid dropping the pedal or subjecting it to strong impacts. Do not attempt to disassemble the unit, as this will void the warranty.

6. Solució De Problemes

If you encounter any issues with your FLAMMA FX50, refer to the following common problems and solutions:

• Sense so:
  • Comproveu totes les connexions dels cables (guitarra, sortida, alimentació).
  • Ensure the pedal is powered on and the power adapter is functioning correctly, or batteries are fresh and correctly inserted.
  • Verify the VOL knob is turned up.
  • Check if the guitar's volume knob is turned up.
• Unexpected Effects/Sound:
  • Check the settings of the MOD, DLY/REV, DRIVE, and TONE knobs.
  • Ensure the correct patch is selected.
  • If using headphones, ensure they are properly connected to the PHONES jack.
• Tuner Not Responding:
  • Ensure the guitar is properly connected to the INPUT jack.
  • Make sure you are playing a single note clearly.
• Drum Machine Not Playing:
  • Verify a drum rhythm is selected and the volume is turned up.
  • Press the Play/Pause button to start the rhythm.

If the issue persists, please contact FLAMMA customer support for further assistance.

7. Especificacions

8. Què hi ha a la caixa

Figura 9: Què hi ha a la caixa

• 1 x FLAMMA FX50 Multi-Effects Pedal
• 1 x AC Adapter (9V DC)
• 1 x Safety Instruction & Warranty Card
• 1 x Adhesiu
• 1 x cable USB

9. Vídeo oficial del producte

10. Garantia i Suport

The FLAMMA FX50 comes with a manufacturer's warranty. Please refer to the included Safety Instruction & Warranty Card for detailed information regarding warranty coverage and terms. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please visit the official FLAMMA weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.