1. Producte acabatview
The MONTECH Sky Two GX is an E-ATX Mid Tower Case designed for high airflow performance, featuring a metal mesh front panel and pre-installed PWM ARGB fans. It offers enhanced compatibility and ease of use for PC builders.
Figura 1.1: Frontal view of the MONTECH Sky Two GX Black PC Case with the tempered glass side panel open, showcasing the interior and front mesh panel.
Característiques principals:
- Metal Mesh Front Panel: Ensures optimal airflow and dust protection with up to 51% porosity.
- Enhanced Dimensions: 10mm taller on top for better radiator support and 5mm wider cable management space (25mm total).
- Ventiladors preinstal·lats: Equipped with three AX140 ARGB PWM fans, supporting up to 11 fans in total.
- Swivel Side Panel: Improves accessibility and simplifies maintenance.
- Multifunctional Side Panel: Supports SSI-EEB motherboards and 2x 2.5-inch SSDs, with quick detachment for fan installation.
Figure 1.2: Diagram illustrating the increased height (10mm) for radiator support and wider cable management space (25mm) in the Sky Two GX compared to previous models.
2. Configuració i instal·lació
This section provides general guidelines for setting up your MONTECH Sky Two GX case. For detailed component-specific instructions, please refer to your component manuals.
2.1 Preparació del cas
- Desempaquetar la caixa: Traieu amb cura la caixa del seu embalatge. Inspeccioneu-la per si hi ha hagut danys durant l'enviament.
- Traieu els panells laterals: The tempered glass side panel swivels open for easy access. The opposite side panel can be removed by unscrewing the thumbscrews.
- Caixa d'accessoris: Locate the accessory box inside the case, which contains screws, zip ties, and other installation hardware.
2.2 Instal·lació de components
- Instal·lació de la placa base: Install your E-ATX, ATX, Micro-ATX, or Mini-ITX motherboard onto the standoffs. Ensure proper alignment and secure with screws.
- Instal·lació de la unitat d'alimentació (PSU): Install the PSU into its dedicated compartment at the bottom rear of the case.
- Instal·lació de la unitat d'emmagatzematge:
- For 2.5-inch SSDs, use the dedicated mounts on the multifunctional side panel.
- For 3.5-inch HDDs, use the drive cage located near the PSU shroud.
- Instal·lació de la targeta gràfica (GPU): Install your GPU into the appropriate PCIe slot. The case supports GPUs up to 400mm in length.
- Instal·lació del sistema de refrigeració:
- Fans: The case comes with three pre-installed 140mm ARGB PWM fans at the front. Additional fans can be installed at the top, rear, and bottom. The case supports up to 11 fans.
- Radiadors: The case supports radiators up to 360mm at the top and front.
- Refredador de CPU: The case accommodates CPU coolers up to 168mm in height.
Figure 2.1: Internal layout diagram detailing component compatibility, including CPU cooler height, GPU length, PSU clearance, and radiator/fan support locations and sizes.
2.3 Gestió de cables
Utilize the 25mm cable management space behind the motherboard tray and the included zip ties to route and secure cables neatly. This improves airflow and aesthetics.
3. Instruccions de funcionament
This section covers the basic operation of your MONTECH Sky Two GX case, focusing on its integrated features.
3.1 Panell frontal d'E/S
El panell frontal d'E/S proporciona un accés convenient als ports i controls essencials:
- Botó d'encesa: Press to power on/off your system.
- Botó de restabliment: Press to restart your system.
- Ports USB 3.0 (x2): Per a la transferència de dades d'alta velocitat amb dispositius compatibles.
- Port USB tipus C (x1): Per a dispositius USB-C moderns.
- Preses d'àudio: Headphone and microphone jacks for audio peripherals.
Figura 3.1: Primer pla view of the top I/O panel, highlighting the USB 3.0, USB Type-C, audio ports, and power/reset buttons.
Control del ventilador 3.2 ARGB
The pre-installed AX140 ARGB PWM fans offer customizable lighting. The RGB functionality of the front fans is dependent on your motherboard's RGB pins. For full synchronization and control, connect the fan RGB controller to your motherboard's ARGB header.
Refer to your motherboard's manual for specific instructions on controlling ARGB lighting via software.
Vídeo 3.1: Presentació oficial del producte en vídeoasing the MONTECH Sky Two GX case, highlighting its design and features, including the pre-installed ARGB fans.
4. Manteniment
Un manteniment regular ajuda a garantir un rendiment òptim i una major longevitat de la carcassa del teu PC.
4.1 Neteja
- Exterior: Utilitzeu un suau, damp drap per netejar les superfícies exteriors. Eviteu productes de neteja abrasius.
- Filtres de pols: The metal mesh front panel and other filtered areas are designed to be dustproof. Regularly clean these filters to maintain optimal airflow. The front panel features a quick-release mechanism for easy removal and cleaning.
- Interior: Use compressed air to remove dust from inside the case, especially from fans and heatsinks. Perform this outdoors or in a well-ventilated area.
Figure 4.1: Illustration of the innovative mesh front panel with its quick-release mechanism, designed for superior airflow and easy maintenance.
4.2 Panel Removal and Reinstallation
- Panell lateral de vidre temperat: This panel swivels open for convenient access. To fully remove, gently lift it off its hinges when fully open. Reinstall by aligning the hinges and closing the panel until it latches magnetically.
- Steel Side Panel: Loosen the thumbscrews at the rear of the case, then slide the panel backward and lift it off. Reinstall by aligning the panel and securing the thumbscrews.
- Multifunctional Side Panel: This panel can be quickly detached for fan installation or accessing 2.5-inch SSD mounts. Refer to the internal switch for opening/closing.
5. Solució De Problemes
This section addresses common issues you might encounter with your MONTECH Sky Two GX case.
5.1 Fans Not Spinning or RGB Not Lighting Up
- Connexió d'alimentació: Ensure all fans are properly connected to the motherboard fan headers (PWM) and the fan RGB controller is powered via SATA.
- RGB Connection: Verify that the fan RGB controller is correctly connected to your motherboard's ARGB header (3-pin, 5V).
- Programari de la placa base: Check your motherboard's RGB control software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) to ensure fans are enabled and configured correctly.
- Integritat del cable: Inspect fan cables for any damage or loose connections.
5.2 Poor Airflow or High Temperatures
- Acumulació de pols: Clean all dust filters and internal components as described in the Maintenance section.
- Orientació del ventilador: Ensure fans are installed with the correct airflow direction (intake/exhaust) for optimal cooling. Front fans typically act as intake, rear and top as exhaust.
- Gestió de cables: Poor cable management can obstruct airflow. Reroute cables to minimize obstruction.
- Component Clearance: Verify that large components (e.g., CPU cooler, GPU) are not excessively close to case panels or other components, which could restrict airflow.
5.3 Front I/O Ports Not Functioning
- Motherboard Connections: Ensure the front I/O cables (USB 3.0, USB Type-C, HD Audio, Power SW, Reset SW, Power LED, HDD LED) are correctly connected to the corresponding headers on your motherboard. Refer to your motherboard manual for header locations.
- Problemes del controlador: For USB ports, ensure your operating system has the latest USB drivers installed.
6. Especificacions
| Característica | Detall |
|---|---|
| Marca | Montech |
| Nom del model | Sky Two GX Black |
| Número de model de l'article | SKYTWOGXB |
| Tipus de cas | Mid Tower (Desktop) |
| Compatibilitat amb la placa base | E-ATX, ATX, Micro-ATX, Mini-ITX |
| Material | Tempered Glass, Metal Mesh |
| Color | Negre |
| Pes de l'article | 13.97 lliures |
| Dimensions del producte (LxWxH) | 18 x 20 x 10 polzades |
| Ventiladors preinstal·lats | 3 x 140mm ARGB PWM (Front) |
| Suport màxim del ventilador | Up to 11 fans |
| Suport del radiador | Up to 360mm (Top, Front) |
| Alçada màxima del refrigerador de la CPU | 168 mm |
| Longitud màxima de la GPU | 400 mm |
| Longitud màxima de la PSU | 210 mm |
| Ports d'E / S frontals | 2x USB 3.0, 1x USB Type-C, Audio In/Out, Power, Reset |
| Espai de gestió de cables | 25 mm |
7. Garantia i Suport
MONTECH provides a limited warranty for the Sky Two GX PC case. Please retain your proof of purchase for warranty claims.
7.1 Informació de la garantia
For detailed warranty terms and conditions, please visit the official MONTECH weblloc o poseu-vos en contacte amb el seu servei d'atenció al client.
7.2 Suport tècnic
If you encounter any issues not covered in this manual, or require further assistance, please contact MONTECH technical support through their official channels:
- Weblloc: www.montechpc.com
- Correu electrònic: Consulteu el weblloc web per a adreces de correu electrònic d'assistència.
- Telèfon: Consulteu el weblloc per als números de contacte regionals.
Please have your product model number (SKYTWOGXB) and proof of purchase ready when contacting support.
