1. Introducció
The Thermaltake Dr. Power III is a universal ATX power supply tester designed to verify the functionality and voltage output of various power supply units (PSUs). It supports modern ATX power supplies, including ATX12V v3.1, and features a PCIe 12+4pin connector for compatibility with newer graphics cards. The integrated LCD provides real-time monitoring of +12V, +5V, +3.3V, and +5Vsb voltage outputs, enabling quick and accurate assessment of PSU performance.
Image: Thermaltake Dr. Power III Universal ATX Power Supply Tester.
2. Informació de seguretat
- Always ensure the power supply unit is disconnected from the main power outlet before connecting or disconnecting the tester.
- Do not attempt to open or modify the Dr. Power III tester. Doing so may void the warranty and pose a safety risk.
- Handle all connectors carefully to avoid bending pins or damaging cables.
- Use the tester in a dry environment, away from liquids and excessive humidity.
- If any fault is detected (red backlight, beeping), immediately disconnect the power supply and investigate the issue.
3. Contingut del paquet
- Thermaltake Dr. Power III ATX Power Supply Tester
- Manual d'usuari
- Bossa de transport
4. Producte acabatview
The Dr. Power III features a compact design with multiple ports for various PSU connectors and an LCD for clear voltage lectures.
Imatge: Frontal view of the Dr. Power III tester, showing the LCD display and power button.
Image: Dr. Power III tester with various PSU cables connected, demonstrating its comprehensive testing capabilities.
Introducció al connector
Image: Diagram illustrating the location of the 12+4pin connector, 24pin connector, Peripheral connector, PCI-E 6pin or 8pin connector, SATA connector, and CPU 4pin or 8pin connector.
The tester includes dedicated ports for:
- 24-pin ATX Connector: Main power for motherboard.
- PCIe 12+4pin Connector: For modern high-power graphics cards (ATX12V v3.1 compatible).
- PCI-E 6-pin or 8-pin Connector: Per a targetes gràfiques.
- CPU 4-pin or 8-pin Connector: For CPU power.
- Connector SATA: For SATA devices.
- Molex (Peripheral) Connector: For older peripherals.
The LCD display shows real-time voltage readings for +12V, +5V, +3.3V, and +5Vsb. A check button allows toggling between manual tests or initiating an automatic test.
Video: Demonstrates the Dr. Power III's LCD display and basic connection process for a power supply unit.
5. Configuració
Connexió de la font d'alimentació
- Ensure the power supply unit is completely powered off and unplugged from the wall outlet.
- Connecteu el Connector ATX de 24 pins from your PSU to the corresponding port on the Dr. Power III tester. This is the primary connection and must be made first to activate the tester.
- Connect other desired cables (e.g., CPU 4/8-pin, PCIe 6/8-pin, PCIe 12+4pin, SATA, Molex) to their respective ports on the tester. The order of these secondary connections is not critical after the 24-pin ATX is connected.
- Once all desired cables are securely connected, plug the power supply unit into the main power outlet and turn it on. The Dr. Power III LCD will illuminate.
Note: If a PCIe 12+4pin cable is connected, the standard PCIe 6/8-pin ports will be disabled to prevent conflicting readings or potential damage.
Video: Illustrates the connection of various power supply cables to the tester and the display of voltage lectures.
6. Instruccions de funcionament
The Dr. Power III offers both automatic and manual testing modes.
Automatic Test Mode
- Ensure all desired PSU cables are connected to the tester and the PSU is powered on.
- Press and hold the 'Check' button (power button) on the tester for approximately 5 seconds until you hear a beep.
- The tester will automatically cycle through all connected power lines, displaying their voltage outputs sequentially.
- Observe the LCD display for any anomalies. If a fault is detected, the backlight will turn red and an alarm will sound.
Mode de prova manual
- Ensure all desired PSU cables are connected to the tester and the PSU is powered on.
- Press the 'Check' button briefly (less than 5 seconds).
- Each short press will advance to the next connected power line, displaying its voltage sortida.
- Manually check each reading against the standard voltage ranges (refer to Specifications section).
Image: The Dr. Power III's diagnostic system, showing a white backlight for normal operation and a red backlight with an alarm for detected faults.
7. Manteniment
- Keep the tester clean and free from dust. Use a soft, dry cloth for cleaning.
- Store the tester in its carrying pouch when not in use to protect it from scratches and impacts.
- Avoid exposing the tester to extreme temperatures or direct sunlight.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El provador no s'encén. | 24-pin ATX connector not properly connected or PSU is off/faulty. | Ensure 24-pin ATX is securely connected. Verify PSU is powered on and functioning. |
| Red backlight and beeping alarm. | Voltage outside acceptable range (low-voltage, alt voltage, no voltage) or Power Good (PG) signal issue. | Immediately disconnect the PSU. Check all connections. Test with a known good PSU if possible. If the issue persists, the PSU may be faulty. |
| No reading for a specific connector (e.g., PCIe 6/8-pin). | Cable not connected, faulty cable, or PCIe 12+4pin is connected (disabling other PCIe ports). | Ensure the cable is correctly and firmly connected. Disconnect the PCIe 12+4pin if testing other PCIe ports. Try a different cable if available. |
| Vol inexactetage lectures. | Poor connection, faulty tester, or extreme environmental conditions. | Reconnect all cables. Ensure the tester is used within recommended operating conditions. If suspected faulty, contact support. |
9. Especificacions
| Característica | Detall |
|---|---|
| Número de model | AC-069-OO1NAN-A1 |
| Dimensions (L x L x A) | 74.8 mm x 135.8 mm x 24.4 mm (aprox. 2.92 x 5.3 x 0.95 polzades) |
| Supported ATX Standard | Up to ATX12V v3.1 |
| Connectors Supported | 24-pin ATX, PCIe 12+4pin, PCIe 6/8-pin, CPU 4/8-pin, SATA, Molex |
| Tipus de visualització | LCD (pantalla de cristall líquid) |
| Monitored Voltages | +12V, +5V, +3.3V, +5Vsb |
| Power Good (PG) Range | 100ms ≤ T ≤ 500ms |
| Certificacions de seguretat | CE, FCC, RoHS, UL |
Intel Standard Voltage Gammes
| Voltage | Min. (V) | Màx. (V) |
|---|---|---|
| +5V | 4.70 V | 5.25 V |
| +3.3V | 3.14 V | 3.47 V |
| +12V | 11.4 V | 12.6 V |
| +5Vsb | 4.70 V | 5.25 V |
10. Garantia i Suport
The Thermaltake Dr. Power III comes with a 3 any de garantia, ensuring reliability and enduring performance. For technical support, troubleshooting assistance, or warranty claims, please visit the official Thermaltake weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el comprovant de compra per validar la garantia.
Image: Dr. Power III with a '3 Year Warranty' badge, highlighting product assurance.
