1. Introducció
The EDMI Mk32 is a sophisticated single-phase smart meter designed for residential electricity management. It supports both STS compliant prepaid and post-paid operational modes, offering flexibility for various utility requirements. This manual provides essential information for the safe installation, operation, and maintenance of your EDMI Mk32 meter.
Les característiques clau inclouen:
- Integrated 100A UC3 compliant relays.
- Ability to operate in prepaid or post-paid modes.
- Compatibility with EDMI CIU (Customer Interface Unit) - HD18 and HD21 for wireless split metering.
- Durable and compact design for long-term reliability.
2. Informació de seguretat
WARNING: Installation and servicing of this meter must only be performed by qualified and authorized personnel. Failure to comply may result in serious injury, electric shock, or damage to the equipment.
- Always disconnect power before installation, maintenance, or any wiring procedures.
- Assegureu-vos que es compleixin estrictament tots els codis i regulacions elèctriques locals i nacionals.
- No feu funcionar el mesurador si sembla que està danyat.
- Keep the meter away from moisture and extreme temperatures.
- The meter contains no user-serviceable parts. Do not attempt to open or repair the unit.
3. Producte acabatview
The EDMI Mk32 meter features a clear display, an integrated keypad for token entry, and secure terminal connections. Below is an image illustrating the main components of the meter.
Figura 1: Frontal view of the EDMI Mk32 Smart Meter, showing the display, keypad, and terminal block for electrical connections.
3.1. Components clau
- Visualització: 8-character, eight-segment display (9mm x 4.96mm) for showing consumption, credit, and status messages. Features an option for backlight and remains active without mains power.
- Teclat: Numeric keypad for entering STS tokens and navigating display menus.
- Indicadors LED: Up to 5 LED indicators for power, tamper, and other operational statuses.
- Bloc de terminals: Secure connections for incoming and outgoing electrical wiring.
4. Configuració i instal·lació
IMPORTANT: Installation must be carried out by a certified electrician in accordance with all applicable electrical standards and regulations.
- Comprovació prèvia a la instal·lació: Verify that the meter's specifications (voltage, current) match the electrical supply and load requirements. Inspect the meter for any physical damage.
- Muntatge: Securely mount the meter in a dry, protected location, ensuring adequate ventilation and accessibility for reading and maintenance.
- Cablejat: Connect the incoming and outgoing electrical cables to the designated terminals as per the wiring diagram provided with the meter. Ensure all connections are tight and secure.
- Encès: Once wiring is complete and verified, restore power to the meter. The display should illuminate, indicating successful power-up.
- Initial Configuration (if applicable): Depending on the utility provider, initial configuration or pairing with a Customer Interface Unit (CIU) may be required. Refer to specific utility guidelines or the CIU manual for details.
5. Instruccions de funcionament
5.1. Prepaid Mode Operation
In prepaid mode, the meter requires a valid STS (Standard Transfer Specification) token to supply electricity. Tokens are typically purchased from your utility provider.
- Entering a Token: Use the numeric keypad to enter the 20-digit STS token.
- Confirming Entry: After entering all digits, press the 'Enter' or 'Red' button (if available) to confirm.
- Token Validation: The meter will validate the token. A successful entry will add credit to your meter, and the supply will be restored (if disconnected). An invalid token will result in an error message on the display.
- Checking Credit: The display typically shows the remaining credit or units. Consult your utility provider's specific instructions for display navigation to view detailed credit information.
5.2. Post-Paid Mode Operation
In post-paid mode, the meter continuously measures electricity consumption. Billing is handled by your utility provider based on periodic readings.
- Reading Consumption: The display will show the current electricity consumption (e.g., in kWh).
- Navegació de la pantalla: Use the meter's buttons (if any, typically indicated by arrows or specific symbols) to cycle through various display parameters such as current consumption, voltage, current, and power factor.
5.3. Customer Interface Unit (CIU) Integration
The Mk32 meter can operate wirelessly with EDMI CIUs like the HD18 and HD21. This allows users to interact with the meter (e.g., enter tokens, check credit) from a convenient indoor location without direct access to the meter itself. Refer to the specific CIU manual for pairing and operational instructions.
6. Manteniment
The EDMI Mk32 meter is designed for minimal maintenance. However, periodic checks can help ensure its longevity and accurate operation.
- Neteja: Gently wipe the meter's exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture.
- Inspecció visual: Periodically inspect the meter for any signs of physical damage, loose connections, or tampering. Report any anomalies to your utility provider immediately.
- Condicions ambientals: Ensure the meter remains within its specified operating temperature and humidity ranges.
7. Solució De Problemes
This section addresses common issues you might encounter with your EDMI Mk32 meter.
- Sense alimentació/Pantalla apagada:
- Comproveu l'interruptor principal.
- Ensure there is sufficient credit (in prepaid mode).
- If the issue persists, contact your utility provider.
- Invalid Token Error:
- Double-check the token digits for accuracy.
- Ensure the token is valid for your specific meter.
- Contact your utility provider if the problem continues.
- Tamper Indicació:
- Si a lesamper indicator (LED or display message) is active, it suggests unauthorized interference.
- Do not attempt to clear it yourself. Immediately contact your utility provider.
For any issues not covered here, or if troubleshooting steps do not resolve the problem, please contact your electricity utility provider or a qualified technician.
8. Especificacions
| Característica | Detall |
|---|---|
| Número de model | MK32-211 |
| Marca | EDMI |
| Tipus | Prepaid Single Phase Power Smart Meter |
| Volum nominaltage | 220 V - 240 V |
| Vol. Operatiutage Rang | 0.5Un to 1.2Un |
| Resistir voltage Rang | 0V a 456V |
| Impuls Voltage | 4kV |
| Freqüència | 50 Hz/60 Hz |
| Relleus | Integrated 100A UC3 compliant relays (up to two internal disconnect relays, 80A or 120A options) |
| Mostra | 8 Character eight-segment display (9mm x 4.96mm), with optional backlight, available without mains power. |
| Normes i compliment | Class 1 and Class 2, IEC 62052-11, 62053-21, 62053-23, 62055-31, 62055-41, 62055-51 |
| Composició de les cèl·lules de la bateria | Lithium (Non-rechargeable) |
| Color | Blanc |
9. Informació de la garantia
The EDMI Mk32 Smart Meter comes with a 1 anys de garantia del fabricantAquesta garantia cobreix els defectes de materials i de fabricació en condicions d'ús normal. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.
The warranty does not cover damage caused by improper installation, misuse, unauthorized repairs, or external factors such as power surges or natural disasters.
For warranty service, please contact your point of purchase or your electricity utility provider.
10. Suport
For technical assistance, operational queries, or reporting faults, please contact your electricity utility provider. They are best equipped to provide support specific to your local network and billing system.
You may also visit the official EDMI website for general product information and resources: www.edmi-meters.com
