1. Introducció
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Faber 90cm 1500m³/hr BLDC Motor Autoclean Chimney. Please read these instructions carefully before using the appliance and retain them for future reference. Proper use and maintenance will ensure optimal performance and longevity of your chimney.
2. Producte acabatview
The Faber HOOD IRIS BLDC FL HC BK 90 is a wall-mounted kitchen chimney designed for effective smoke and odor extraction. It features a powerful BLDC motor, filterless technology, and convenient control options.
Característiques principals:
- Motor BLDC: Offers high efficiency, reduced noise, and extended lifespan.
- 1500 m³/hr Suction Power: Suitable for kitchens with 4-6 burner stoves.
- Filterless Technology: Eliminates the need for frequent filter cleaning.
- Autoclean Feature: Simplifies internal cleaning and maintenance.
- Built-In Oil Collector: Gathers oil residues for easy disposal.
- Touch & Gesture Control: Provides intuitive operation with 9 speed settings.
- Il·luminació LED: Illuminates the cooking area efficiently.
Producte Views:
3. Instruccions de seguretat
Seguiu sempre les precaucions de seguretat següents per evitar lesions o danys a l'aparell.
- Assegureu-vos que el subministrament elèctric coincideixi amb el volumtage especificat a l'etiqueta de qualificació.
- Do not operate the chimney without the oil collector properly installed.
- Mantingueu els nens allunyats de l'aparell durant el funcionament i la neteja.
- Never flambé under the chimney.
- Regularly clean the oil collector to prevent fire hazards.
- Desconnecteu l'alimentació abans de qualsevol neteja o manteniment.
- La instal·lació ha de ser realitzada per un tècnic qualificat.
4. Configuració i instal·lació
Proper installation is crucial for the chimney's performance and safety. It is recommended that installation be carried out by a Faber authorized service technician.
4.1 Desembalatge
Carefully remove the chimney from its packaging. Inspect for any damage during transit. Retain packaging materials for potential future transport or service.
4.2 Muntatge
The chimney is designed for wall-mounted installation. Ensure the wall structure is strong enough to support the chimney's weight. Maintain the recommended distance between the cooking surface and the chimney for optimal suction and safety.
4.3 Connexió elèctrica
Connect the chimney to a grounded electrical outlet. Ensure the power supply is stable and meets the appliance's requirements (240 Volts). Do not use extension cords or adapters.
4.4 Ducting (Optional)
The chimney can be installed with or without a duct. For ducted installation, ensure the ducting is properly sealed and leads to an external vent. For ductless (recirculating) use, a charcoal filter may be required (contact customer support for details).
5. Instruccions de funcionament
Your Faber Hood Iris chimney features intuitive touch and gesture controls for easy operation.
5.1 Tauler de control
The control panel is located on the front of the chimney and includes touch-sensitive buttons for various functions.
5.2 Encès/Apagat
- Control tàctil: Premeu el botó d’engegada del tauler de control.
- Control de gestos: Wave your hand from left to right in front of the motion sensor to turn the chimney ON. Wave from right to left to turn it OFF.
5.3 Adjusting Suction Speed
The chimney offers 9 speed settings for varying cooking needs.
- Control tàctil: Use the '+' and '-' buttons on the control panel to increase or decrease the fan speed.
- Control de gestos: Wave your hand from left to right to increase speed. Wave from right to left to decrease speed.
5.4 Il·luminació LED
Press the light button on the control panel to turn the LED lights ON or OFF, illuminating your cooking area.
5.5 Autoclean Function
The autoclean feature helps maintain the chimney's internal cleanliness. Refer to the maintenance section for details on activating and managing this function.
6. Manteniment
Regular maintenance ensures the longevity and efficient operation of your chimney.
6.1 Autoclean Cycle
The autoclean function uses heat to melt and collect oil residues. It is recommended to run the autoclean cycle periodically, depending on your cooking frequency.
- To activate, press the 'Autoclean' button on the control panel.
- The cycle will run for a set duration, after which the chimney will automatically turn off.
- Ensure the oil collector is empty before starting an autoclean cycle.
6.2 Oil Collector Cleaning
The built-in oil collector gathers oil and grease. It should be emptied and cleaned regularly.
- Carefully remove the oil collector from its housing.
- Empty the collected oil into a suitable container.
- Wash the oil collector with warm, soapy water. Rinse thoroughly and dry completely before reinserting.
6.3 Neteja exterior
Clean the exterior surfaces of the chimney with a soft cloth and mild detergent. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
7. Solució De Problemes
If you encounter issues with your chimney, refer to the following table for common problems and solutions.
| Problema | Causa possible | Solució |
|---|---|---|
| Chimney not turning on | Sense font d'alimentació; connexió fluixa | Check power cord and circuit breaker. Ensure proper connection. |
| Baixa potència d'aspiració | Oil collector full; ducting obstruction (if ducted); incorrect speed setting | Empty and clean oil collector. Check ducting for blockages. Increase fan speed. |
| Soroll inusual durant el funcionament | Loose components; foreign object in fan | Turn off and disconnect power. Inspect for loose parts or obstructions. Contact service if noise persists. |
| Autoclean not functioning | Control panel issue; internal fault | Ensure power is stable. If issue persists, contact customer support. |
If the problem persists after attempting these solutions, please contact Faber customer support.
8. Especificacions
Technical details for the Faber HOOD IRIS BLDC FL HC BK 90 Chimney.
| Característica | Especificació |
|---|---|
| Número de model | 325.0718.160 |
| Tipus | Curved Glass | Wall Mounted |
| Mida | 90 cm |
| Potència d'aspiració | 1500 m³/hr (Cubic Meters Per Hour) |
| Tipus de filtre | Filterless |
| Tipus de control | Touch Control, Gesture Control, Motion Sensor |
| Nombre de velocitats | 9 |
| Nivell de soroll | 52 dB |
| Tipus de motor | Motor BLDC |
| Il·luminació | 2 LED Lamps |
| Voltage | 240 Volts |
| Wattage | 80 watts |
| Dimensions (LxWxH) | 90 x 42 x 47.5 Centimetres |
| Pes de l'article | 12.5 quilos |
| Material | Vidre, metall |
9. Garantia i Suport
Faber provides comprehensive warranty coverage and dedicated customer support for your product.
9.1 Informació de la garantia
- Garantia del producte: 2 Years Comprehensive Warranty on the product.
- Garantia del motor: 8 Years Warranty on the BLDC Motor.
- Warranty is valid from the date of purchase. Please retain your purchase invoice for warranty claims.
9.2 Atenció al client
For installation requests, service, or any product-related queries, please contact Faber customer support:
- Número gratuït: 1800-209-3484
- Please have your model number and purchase details ready when contacting support.
