ALGAM LIGHTING VULKAN 1200 Fog Machine

Introducció

Welcome to the user manual for your ALGAM LIGHTING VULKAN 1200 Fog Machine. This powerful 1200W vertical fogger with 9 x 3W RGB LEDs is designed to create stunning CO2-like effects for various events and performances. Please read this manual thoroughly before operation to ensure safe and optimal performance and to maximize the lifespan of your device.

Informació important de seguretat

• Llegiu totes les instruccions abans d'utilitzar-les i conservi-les per a futures consultes.
• This device is for indoor use only (IP20 rating). Do not expose to rain, moisture, or high humidity.
• Ensure the power supply matches the device's requirements (240V AC 50/60 Hz). Always use a grounded electrical outlet.
• Use only recommended rapid dispersion fog fluid (FOG-QD). Using other fluids may cause damage, poor performance, or create hazardous conditions.
• Do not touch the nozzle or any metal parts near the output during operation; they become extremely hot. Allow sufficient cooling time before handling.
• Mantenir fora de l'abast dels nens i del personal no autoritzat.
• Assegureu-vos que hi hagi una ventilació adequada al voltant de la unitat per evitar el sobreescalfament. No bloquegeu cap obertura de ventilació.
• Disconnect the unit from the power supply before cleaning, servicing, or refilling the fluid reservoir.
• If the power cable is damaged, it must be replaced by a qualified technician or the manufacturer's service agent to avoid hazards.
• Never point the fog output directly at people, animals, or sensitive equipment.

Contingut del paquet

Please verify that all components are present in the box:

• ALGAM LIGHTING VULKAN 1200 Fog Machine
• Cable d'alimentació
• Comandament a distància RF
• Manual d'usuari

This image displays the ALGAM LIGHTING VULKAN 1200 fog machine alongside its original packaging, the included power cable, the RF remote control for wireless operation, and the user manual.

Configuració

1. Desembalatge: Carefully remove the fog machine and all accessories from the packaging. Inspect the unit for any signs of damage during transit.
2. Col·locació: Place the VULKAN 1200 on a stable, flat, and heat-resistant surface. Ensure there is sufficient clear space (at least 50 cm) around the unit for proper ventilation and heat dissipation.
3. Dipòsit de fluids: Unscrew the cap of the fluid reservoir and carefully fill it with ALGAM LIGHTING FOG-QD rapid dispersion fog fluid. Do not overfill. Securely replace the cap to prevent spills.
4. Connexió d'alimentació: Connect the supplied power cable to the machine's power input socket and then to a grounded electrical outlet (240V AC 50/60 Hz).
5. Connexió DMX (opcional): If using DMX control, connect a 3-pin XLR DMX cable from your DMX controller to the DMX IN port on the VULKAN 1200. If connecting multiple DMX devices, use the DMX OUT port to link to the next device in the chain.

This image provides a rear-angle view of the ALGAM LIGHTING VULKAN 1200 fog machine, highlighting the power input socket, the DMX IN and DMX OUT ports for control, and the transparent fluid reservoir with its cap.

Instruccions de funcionament

Escalfament inicial

After connecting the power, turn on the main power switch located on the unit. The unit will begin to warm up, indicated by a specific display message or LED. The warm-up time is approximately 3-5 minutes. The machine is ready for operation when the warm-up indicator changes (e.g., a green LED illuminates or the display shows 'READY').

Funcionament manual

Once warmed up, you can manually activate the fog effect. Press the dedicated