Manual d'instruccions del refrigerador líquid de CPU ID-COOLING FX360 PRO

1. Introducció

The ID-COOLING FX360 PRO is a high-performance All-In-One (AIO) liquid CPU cooler designed for desktop computing systems. It features a 360mm radiator, three 120mm high-efficiency fans, and a special CD pattern pump header. This cooler is compatible with a wide range of Intel and AMD sockets, ensuring broad applicability for various PC builds.

Key features include a powerful pump operating at 2900RPM±10% for efficient heat dissipation, and fans delivering a maximum airflow of 82.5CFM and maximum air pressure of 2.55mmH2O. The all-black aesthetic provides a sleek look that integrates seamlessly into most PC cases.

This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your FX360 PRO cooler.

Image 1: ID-COOLING FX360 PRO Liquid CPU Cooler showcasing el seu disseny i les seves característiques.

2. Contingut del paquet

Verifiqueu que tots els components que s'enumeren a continuació siguin presents al vostre paquet:

• 1x 360mm Radiator with integrated pump and tubing
• 3x 120mm Cooling Fans
• 1x Tube of Thermal Paste (ID-COOLING FROST X45)
• 1x Fan Extension Cable
• Mounting Hardware for Intel Sockets (LGA1851/1700/1200/115X)
• Mounting Hardware for AMD Sockets (AM4/AM5)
• Manual d'usuari

Imatge 2: acabatview of all components included in the FX360 PRO package, laid out for inspection.

3. Guia d'instal·lació

This section provides step-by-step instructions for installing your ID-COOLING FX360 PRO Liquid CPU Cooler. Please identify your CPU socket type (Intel or AMD) and follow the corresponding instructions carefully.

3.1. General Preparation

1. Ensure your system is powered off and unplugged from the power source.
2. Gather all necessary tools, including a Phillips head screwdriver.
3. Desembaleu tots els components i verifiqueu-los amb la llista de contingut del paquet.

3.2. Attaching Fans to Radiator

1. Position the three 120mm fans onto the radiator. Ensure the fan cables are aligned on the same side for easier cable management.
2. Use the provided long screws to secure each fan to the radiator. Tighten securely but do not overtighten.
3. Daisy-chain the fan cables together using the integrated connectors. Connect the last fan's cable to the provided fan extension cable. This extension cable will connect to your motherboard's CPU_FAN header or a dedicated fan controller.

Image 3: The three 120mm fans are shown daisy-chained and mounted onto the 360mm radiator.

3.3. Intel Socket Installation (LGA1851/1700/1200/115X)

1. Adjust the Intel backplate screws to the corresponding positions for your specific LGA socket (pull outward for LGA1851/1700, pull inward for LGA1200/115X).
2. Place the backplate through the back of the motherboard, aligning the screw holes.
3. Mount the appropriate Intel standoffs onto the posts of the backplate from the front side of the motherboard.
4. Peel off the protective sticker from the copper plate of the pump.
5. Attach the correct Intel mounting bracket to the pump head. Align the registration marks on the pump housing and the bracket, press firmly into place, and twist clockwise to lock.
6. Clean the CPU surface with isopropyl alcohol and apply a thin, pea-sized layer of the provided thermal grease onto the center of the CPU's Integrated Heat Spreader (IHS).
7. Carefully place the pump assembly over the four standoffs, ensuring proper contact with the CPU.
8. Secure the pump assembly with the four mounting nuts. Tighten them in a diagonal pattern until snug. Do not overtighten.

3.4. Instal·lació del sòcol AMD (AM4/AM5)

1. Remove the original AMD plastic retention frame from the motherboard, but keep the stock backplate.
2. Mount the provided rubber grommets and AMD standoffs onto the existing posts on the stock backplate.
3. Peel off the protective sticker from the copper plate of the pump.
4. Attach the correct AMD mounting bracket to the pump head. Align the registration marks on the pump housing and the bracket, press firmly into place, and twist clockwise to lock.
5. Clean the CPU surface with isopropyl alcohol and apply a thin, pea-sized layer of the provided thermal grease onto the center of the CPU's Integrated Heat Spreader (IHS).
6. Carefully place the pump assembly over the four standoffs, ensuring proper contact with the CPU.
7. Secure the pump assembly with the four mounting nuts. Tighten them in a diagonal pattern until snug. Do not overtighten.

Image 4: The pump head of the FX360 PRO securely mounted on an AMD motherboard, illustrating the final installation step.

3.5. Mounting Radiator and Cable Connections

1. Mount the radiator with attached fans to an available 360mm mounting location in your PC case (e.g., top, front). Use the appropriate screws provided with your case or cooler.
2. Connect the fan extension cable (from step 3.2) to the CPU_FAN header on your motherboard.
3. Connect the 3-pin pump cable from the radiator to the PUMP_FAN header on your motherboard. If your motherboard does not have a dedicated PUMP_FAN header, connect it to a SYS_FAN header.
4. Use the included cable combs to organize the water tubes for a cleaner aesthetic.

Video 1: Official ID-COOLING installation guide for FX PRO Series coolers, demonstrating the step-by-step setup process.

Video 2: Official ID-COOLING installation guide specifically for the FX360 PRO, providing visual instructions for assembly and mounting.

4. Instruccions de funcionament

For optimal cooling performance and pump longevity, it is recommended to run the pump at 100% speed. Access your motherboard's BIOS settings to configure the PUMP_FAN header (or the SYS_FAN header if used) to run at full speed. You can adjust the fan curves for the 120mm cooling fans based on your preference for noise levels and cooling performance.

Image 5: Diagram showing the V7 water pump's internal structure and performance metrics, including 2900 RPM speed and 350W TDP.

Image 6: Diagram detailing the specifications of the 120mm cooling fans, including fan speed, max air flow, max air pressure, and noise level.

5. Manteniment

Regular maintenance ensures the longevity and efficiency of your liquid CPU cooler.

• Neteja de pols: Netegeu periòdicament les aletes del radiador i les aspes del ventilador per evitar l'acumulació de pols, que pot impedir el flux d'aire i reduir el rendiment de refrigeració. Feu servir aire comprimit o un raspall suau.
• Inspecció del cable: Check all cables (fan, pump, power) for secure connections and any signs of wear or damage.
• Inspecció de tubs: Inspect the liquid tubes for any kinks, leaks, or signs of degradation.
• Pasta tèrmica: While not frequently required, if you remove the pump from the CPU, you must clean off old thermal paste and apply new thermal paste before reinstallation.

6. Solució De Problemes

If you encounter issues with your FX360 PRO cooler, refer to the following common troubleshooting steps:

7. Especificacions

8. Garantia i Suport

ID-COOLING products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the official ID-COOLING weblloc web o poseu-vos en contacte amb el vostre distribuïdor local. Conserveu el comprovant de compra per a reclamacions de garantia.