Introducció
This manual provides detailed instructions for the BFT MITTO COOL C4 4-channel transmitter. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. Please read this manual thoroughly before using the transmitter.
Producte acabatview
Figura 1: Frontal view of the BFT MITTO COOL C4 4-channel transmitter, showing the four control buttons and the BFT logo.
Figura 2: Esquena view of the BFT MITTO COOL C4 4-channel transmitter, displaying regulatory marks, model name, and battery specifications.
Configuració
1. Instal·lació de la bateria
The BFT MITTO COOL C4 transmitter requires one LR44 battery, which is included. To install or replace the battery:
- Locate the battery compartment on the back of the transmitter (refer to Figure 2).
- Obriu amb cura la tapa del compartiment.
- Insert the LR44 battery, ensuring correct polarity (+/-).
- Tanqueu bé la tapa del compartiment de la bateria.
2. Programming/Cloning the Transmitter
The BFT MITTO COOL C4 can clone existing BFT remote controls already programmed on your system. This process does not require you to be at the gate system during cloning. Only the 4-button version has a repeat (cloning) function. Only Original BFT remote controls can be cloned.
Important: Access to the receiver/opener is required for initial setup or if cloning from a non-original remote. Please ensure you have access to your receiver/opener before purchase or attempting to program.
Compatible models for cloning include: BFT MITTO COOL C2, MITTO COOL C4, STYLE C4, MITTO2, MITTO4, MITTO2A, MITTO4A, MITTTO B RCB 02/04, KLEIO B RCA 02/04, TRC1, TRC2, TRC3. An old Original BFT remote control BFT MITTTO B RCB 02/04 can also be cloned.
Refer to your gate system's receiver manual for specific programming steps, as procedures may vary. Generally, cloning involves placing the new transmitter in close proximity to the existing, programmed transmitter and following a sequence of button presses.
Instruccions de funcionament
The BFT MITTO COOL C4 is a 4-channel transmitter, meaning it can control up to four different functions or devices (e.g., opening/closing a gate, pedestrian access, lighting). Each button corresponds to a specific channel.
- Funcions del botó: Press the desired button to activate the corresponding function. The specific function of each button is determined during the programming process with your receiver.
- Interval: The transmitter offers a significant operating range, typically up to 50 meters, depending on environmental conditions and receiver sensitivity.
- Resistent a la intempèrie: The transmitter is designed to be weather-resistant, allowing for reliable operation in various outdoor conditions.
Manteniment
Canvi de bateria
When the transmitter's range decreases or the indicator light (if present) becomes dim or unresponsive, it may be time to replace the LR44 battery. Follow the battery installation steps outlined in the 'Setup' section.
Neteja i emmagatzematge
- Clean the transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Store the transmitter in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
- Avoid dropping the transmitter or subjecting it to strong impacts.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Transmitter not working / No response | Bateria baixa o esgotada Not properly programmed Fora de rang Obstruction between transmitter and receiver | Substituïu la bateria Re-program the transmitter (refer to 'Setup' section) Apropa't al receptor Assegureu-vos que hi hagi una línia de visió clara cap al receptor |
| Reduït rang de funcionament | Bateria baixa Interferències d'altres dispositius Environmental factors (e.g., thick walls, metal structures) | Substituïu la bateria Identify and remove sources of interference Try operating from a different position |
| Cloning fails | Source remote is not an Original BFT remote Incorrect cloning procedure New transmitter is not a 4-button version Insufficient access to receiver for initial programming | Ensure source remote is an Original BFT remote Review and repeat cloning steps carefully Confirm transmitter is the 4-button version Ensure you have access to the receiver/opener for programming |
Especificacions
- Model: MITTO COOL C4
- Marca: BFT
- Nombre de canals: 4
- Interval de freqüència: 433 MHz
- Tipus de bateria: 1 x LR44 (inclosa)
- Dimensions del producte: 5 x 3 x 4 cm
- Pes: 20 g
- Característiques especials: Weather-resistant, noise reduction (as per product listing)
- Fabricant: BFT
- Data de primera disponibilitat: 17 de juliol de 2024
Declaració de conformitat
The BFT MITTO COOL C4 transmitter complies with relevant European directives for radio equipment and safety. Copies of the Declaration of Conformity are available for reference.
Figure 3: Page 1 of the Declaration of Conformity, showing compliance statements in multiple languages, including English.
Figure 4: Page 2 of the Declaration of Conformity, providing further details and signatures, including English section.
Garantia i Suport
For warranty information and technical support, please refer to the documentation provided with your purchase or contact your authorized BFT dealer or the manufacturer directly. Extended warranty options may be available from third-party providers.
