Numatic NX300

Numatic NX300 Lithium Battery Charging Dock

Model: 911334

Introducció

This user manual provides essential information for the safe and efficient operation of your Numatic NX300 Lithium Battery Charging Dock, model 911334. This charging dock is designed specifically for Numatic NX series lithium batteries, ensuring optimal performance and longevity for your equipment. Please read this manual thoroughly before use and retain it for future reference.

Informació de seguretat

Always observe the following safety precautions to prevent injury or damage to the charging dock and batteries:

  • Use only with genuine Numatic NX series lithium batteries.
  • No intenteu carregar bateries no recarregables.
  • Ensure the charging dock is placed on a stable, flat, and non-flammable surface.
  • Do not expose the charging dock to moisture, rain, or extreme temperatures.
  • Mantenir fora de l'abast dels nens i mascotes.
  • Disconnect the power supply before cleaning or if the unit will be unused for an extended period.
  • Do not operate the charging dock if it is damaged. Contact qualified service personnel.

Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

  • Numatic NX300 Lithium Battery Charging Dock (911334)
  • Cable d'alimentació

Configuració

Follow these steps to set up your charging dock:

  1. Unpack the charging dock and power cable from the packaging.
  2. Place the charging dock on a clean, dry, and stable surface, away from direct sunlight or heat sources.
  3. Connect the power cable to the charging dock's power input port.
  4. Plug the other end of the power cable into a suitable electrical outlet. The charging dock is now ready for use.
Numatic NX300 Lithium Battery Charging Dock

Figura 1: The Numatic NX300 Lithium Battery Charging Dock. This image shows the black charging dock with a prominent red and grey 'NX300' logo on its front panel. A slot for inserting the battery is visible at the top, and a small indicator light is located to the left of the logo.

Funcionament

To charge a Numatic NX series lithium battery:

  1. Ensure the charging dock is connected to a power supply.
  2. Carefully insert the Numatic NX series lithium battery into the charging slot on the dock. Ensure it clicks securely into place.
  3. The indicator light on the charging dock will illuminate to show the charging status. Typically, a solid light indicates charging, and a different color or flashing pattern indicates a full charge or an error. Refer to the specific indicator guide below.
  4. Once the battery is fully charged, the indicator light will change. You may then remove the battery from the dock.

Guia de llum indicadora

  • Vermell sòlid: Càrrega en curs.
  • Verd sòlid: Bateria completament carregada.
  • Vermell intermitent: Error or fault detected. Remove battery and reinsert. If error persists, consult troubleshooting.

Models compatibles

The Numatic NX300 Lithium Battery Charging Dock (911334) is compatible with lithium batteries used in the following Numatic NX series machines:

  • TTB1840NX
  • RSB150NX
  • NBV190NX
  • NBV240NX
  • PBT230NX

Manteniment

Proper maintenance ensures the longevity of your charging dock:

  • Neteja: Disconnect the power cable before cleaning. Wipe the exterior of the charging dock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Emmagatzematge: Store the charging dock in a cool, dry place when not in use.
  • Inspecció: Periodically inspect the power cable and charging dock for any signs of damage.

Resolució de problemes

If you encounter issues with your charging dock, refer to the table below:

ProblemaCausa possibleSolució
La bateria no es carregaNo power to dock; Battery not inserted correctly; Faulty battery.Check power connection; Reinsert battery firmly; Try a different battery if available.
Indicator light flashing redBattery error; Overheating; Dock malfunction.Remove battery, allow to cool, reinsert; Disconnect power, wait 5 minutes, reconnect. If issue persists, contact support.
La base s'escalfa durant la càrregaFuncionament normal.This is normal. Ensure adequate ventilation around the dock.

Especificacions

CaracterísticaDetall
Número de model911334
MarcaNumàtica
Tipus de bateria compatibleNumatic NX Series Lithium Batteries
Vol. De sortidatage3 volts (CC)
ASINB0CZX7374B
GTIN05028965807804

Garantia i Suport

For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your product or visit the official Numatic website. You may also contact your local Numatic dealer or authorized service center for assistance.

Documents relacionats - NX300

Preview Système de Batterie Lithium Numatic NX300 : Performance et Productivité Sans Fil
Découvrez le système de batterie lithium 36V Numatic NX300, offrant des solutions de nettoyage sans fil puissantes pour une large gamme d'aspirateurs professionnels et de laveuses de sols. Découvrez des fonctionnalités telles que la charge rapide, une alimentation longue durée et une compatibilité polyvalente.
Preview Instruccions de seguretat i ús del carregador Numatic NX300
Guia completa de seguretat i ús per al carregador Numatic NX300, que detalla els procediments de càrrega, els avisos importants, els indicadors d'estat i la informació sobre la seva eliminació.
Preview Fregadora-assecadora de bateria Numatic TTB1840NX/TTB1840NX-R: Manual d'usuari i guia d'operació
Guia completa per a les fregadores-assecadores amb bateria Numatic TTB1840NX i TTB1840NX-R, que cobreix informació sobre configuració, funcionament, manteniment, resolució de problemes i seguretat.
Preview Numatic CTB370 NX & CTX.170 (X-tract Kit) User Manual | Spray Extraction Vacuum Cleaner
User manual and operating instructions for the Numatic CTB370 NX and CTX.170 (X-tract Kit) spray extraction vacuum cleaner. Covers setup, safe operation, battery management, maintenance, and troubleshooting for professional cleaning applications.
Preview Numatic 440NX Floor Scrubber: Monthly Maintenance Guide
Detailed step-by-step instructions for monthly maintenance of the Numatic 440NX Autolaveuse floor scrubber. Learn how to clean, reassemble, and store your machine for optimal performance.
Preview Numatic RSB150 Cordless Backpack Vacuum Spare Parts Diagram
Explotat view diagram and parts list for the Numatic RSB150 Cordless Backpack Vacuum Cleaner, detailing all components and their part numbers.