WALI Single Monitor Stand User Manual

1. Introducció

Thank you for choosing the WALI Single Monitor Stand, a versatile solution designed to enhance your workspace ergonomics and productivity. This manual provides detailed instructions for the assembly, operation, and maintenance of both the GSM001XL gas spring arm and the MF001 desktop stand components. Please read this manual thoroughly before installation to ensure safe and correct usage.

2. Informació de seguretat

• Do not begin installation until you have read and understood all instructions and warnings contained in this manual. If you have any questions, please contact WALI customer support.
• Aquest producte només està pensat per a ús interior.
• Do not exceed the maximum weight capacity specified for each stand component. Overloading can result in serious injury or property damage.
• Ensure the mounting surface (desk) can safely support the combined weight of the stand and the monitor.
• Use only the hardware provided. Do not use damaged parts.
• Mantingueu les peces petites allunyades dels nens.
• Always use two people for lifting and installation of heavy equipment.

3. Contingut del paquet

Please verify that all components are present and undamaged before proceeding with assembly. If any parts are missing or damaged, contact WALI customer support for assistance.

• GSM001XL Gas Spring Arm Assembly
• MF001 Desktop Stand Base & Pole
• Placa(s) VESA
• C-Clamp & Grommet Base Components (for GSM001XL)
• Kit de ferramenta (cargols, volanderes, separadors)
• Tools (Allen wrenches, etc.)
• Manual d'instruccions

4. Instruccions de configuració

This product includes two distinct monitor mounting solutions: the GSM001XL gas spring arm and the MF001 desktop stand. Follow the instructions for the specific component you intend to use.

4.1. MF001 Desktop Stand Assembly

1. Fixar el pal a la base: Secure the vertical pole to the heavy-duty desktop base using the provided screws. Ensure it is firmly tightened for stability.
2. Col·loqueu la placa VESA al monitor: Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm). Use the appropriate screws and spacers from the hardware kit to secure the plate.
3. Mount Monitor to Pole: Slide the VESA plate with the attached monitor onto the bracket on the vertical pole. Ensure it clicks securely into place.
4. Ajusta l'alçada: Loosen the height adjustment collar on the pole, slide the monitor to your desired height (up to 18 inches), and then tighten the collar firmly.

Descripció: The WALI MF001 Desktop Monitor Stand is shown in a typical office setup, supporting a monitor on a wooden desk. This image highlights the stand's compact footprint and how it integrates into a workspace, providing a stable elevated platform for the display.

Descripció: This graphic illustrates the compatibility specifications for the WALI MF001 Desktop Monitor Stand. It indicates a maximum weight capacity of 22 lbs, VESA sizes of 75x75mm or 100x100mm, and compatibility with screen sizes ranging from 13 to 32 inches.

Descripció: This graphic illustrates the height adjustment range of the WALI MF001 Desktop Monitor Stand. The monitor can be adjusted vertically up to 18 inches along the central pole, enabling users to set the display at an ergonomic viewalçada.

4.2. GSM001XL Gas Spring Arm Assembly

1. Choose Mounting Option: Decide between C-clamp or grommet base installation. The C-clamp is suitable for desk edges, while the grommet base uses an existing hole in your desk. Both support desk thickness from 0.39" to 1.77".
2. Install Desk Mount: Attach the chosen C-clamp or grommet base to your desk according to the specific instructions provided in the included quick start guide. Ensure it is securely fastened.
3. Attach Arm to Mount: Slide the gas spring arm onto the installed desk mount post.
4. Col·loqueu la placa VESA al monitor: Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm). Use the appropriate screws and spacers from the hardware kit to secure the plate.
5. Muntar el monitor al braç: Slide the VESA plate with the attached monitor onto the arm's VESA head. Ensure it locks into place.
6. Ajustar la tensió de la molla de gas: If the monitor does not stay in position (sinks or floats up), adjust the gas spring tension using the provided Allen wrench. Turn clockwise to increase tension for heavier monitors, counter-clockwise to decrease for lighter monitors.

Descripció: This image displays the two primary components of the WALI Single Monitor Stand: the GSM001XL gas spring arm mount on the left, designed for desk-edge clamping, and the MF001 desktop stand on the right, featuring a stable base. Both are shown attached to the rear of monitors, illustrating their respective mounting mechanisms.

Descripció: This image compares the WALI GSM001XL Gas Spring Monitor Arm with other monitor arms, highlighting its superior weight capacity. The WALI arm is shown supporting a 33 lbs monitor, while a generic arm supports 27 lbs, emphasizing the GSM001XL's robust design for heavier displays.

Descripció: This image showcases the WALI GSM001XL Gas Spring Monitor Arm's ability to accommodate large screens. It shows the arm supporting a wide monitor, indicating compatibility with displays up to 35 inches, providing a wider visual space for the user.

5. Instruccions de funcionament

Once assembled, both the GSM001XL and MF001 stands offer various adjustment capabilities to achieve an ergonomic viewexperiència.

5.1. Adjusting the MF001 Desktop Stand

• Ajust d'alçada: Loosen the collar on the pole, slide the monitor up or down to the desired height (up to 18 inches), and re-tighten the collar.
• Ajust d'inclinació: Loosen the tilt knob on the VESA plate, adjust the monitor's vertical angle (+/- 45 degrees), and re-tighten.
• Ajust de gir: Rotate the monitor horizontally around the pole (+/- 90 degrees) to change viewdirecció.
• Rotació: Gireu el monitor 360 graus per canviar entre les orientacions horitzontal i vertical.

Descripció: This image demonstrates the angle adjustment capabilities of the WALI MF001 Desktop Monitor Stand. It shows the monitor can swivel +/- 90 degrees, tilt +/- 45 degrees, and rotate 360 degrees, allowing for flexible viewangles d'ajust.

5.2. Adjusting the GSM001XL Gas Spring Arm

• Ajust d'alçada: Gently push or pull the monitor up or down. The gas spring mechanism will hold it in place. Adjust the gas spring tension if the monitor does not stay.
• Ajust d'inclinació: Adjust the monitor's vertical angle by tilting the VESA head.
• Ajust de gir: Rotate the arm at its various joints to position the monitor horizontally.
• Rotació: Rotate the monitor 360 degrees at the VESA head to switch between landscape and portrait orientations.
• Gestió de cables: Utilize the built-in cable management channels on the arm to route and hide messy wires for a clean workspace.

6. Manteniment

• Neteja: Netegeu el suport amb un drap suauamp drap. Eviteu utilitzar netejadors abrasius o dissolvents que puguin danyar l'acabat.
• Comproveu les connexions: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que estiguin ben ajustats i segurs. Torneu a apretar-los si cal.
• Gas Spring Adjustment (GSM001XL): If the monitor begins to sag or float, re-adjust the gas spring tension as described in the setup section.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

WALI products are designed for durability and reliability. For warranty information or technical support, please contact the seller, Wali Electric, or visit the official WALI website. Please have your product model number (GSM001XL + MF001) and purchase details ready when contacting support.