ID-COOLING FROZN A410 SE CPU Air Cooler Instruction Manual

1. Producte acabatview

The ID-COOLING FROZN A410 SE is a high-performance CPU air cooler designed for efficient heat dissipation. It features 4 copper heat pipes and a 120mm PWM fan, ensuring excellent thermal transfer from your CPU. With a total height of 152mm, it is compatible with most tower cases and offers 100% RAM clearance for various motherboards. The cooler is designed for quiet operation, with a maximum noise level of 24.8 dB(A).

2. Característiques clau

• Better Heat Dissipation: Equipped with 4 heat pipes and a 120mm PWM fan for superior heat transfer.
• 4 Heat Pipes: Four Ø6mm copper heat pipes efficiently absorb and transfer heat to the heatsink.
• 152mm Height: Compact design fits most tower cases.
• Compatibilitat de la memòria RAM: Ensures 100% RAM clearance on all motherboard types.
• Powerful Fan: Fan speeds from 300 RPM to 1,800 RPM, delivering up to 55.2 CFM airflow with 1.68mm-H2O static pressure.
• Funcionament ultra silenciós: Noise level of 24.8 dB(A) Max for a quieter computing experience.
• PWM Functionality: Automatic speed control for optimal cooling performance and low noise.
• Atractiu estètic: Black PC fan seamlessly integrates into various computer case designs.
• Àmplia compatibilitat: Supports Intel LGA1851/1700/1200/1151/1150/1155/1156 and AMD AM5/AM4 sockets.

3. Contingut del paquet

The ID-COOLING FROZN A410 SE CPU Air Cooler package includes:

• Dissipador de calor
• Ventilador de refrigeració
• Mounting Hardware (for Intel and AMD sockets)
• Pasta tèrmica

Descripció de la imatge: An illustration showing all the components included in the ID-COOLING FROZN A410 SE package, including the heatsink, fan, various Intel and AMD mounting brackets, standoffs, screws, and a tube of thermal paste.

4. Guia d'instal·lació

Please follow these steps carefully for proper installation. Refer to the video demonstration for visual guidance.

4.1. Intel Installation (LGA1851/1700/1200/115X)

1. Prepare the Backplate: Move the Intel backplate screws to the corresponding positions. For LGA1851/1700, pull the screws outward. For LGA1200/115X, pull the screws inward. Insert the backplate through the back of the motherboard.
2. Install Standoffs and Brackets: Place the appropriate standoffs (grey for LGA1851/1700, black for LGA1200/115X) onto the backplate screws. Then, place the Intel mounting brackets on top of the standoffs and secure them with screw nuts.
3. Aplicar greix tèrmic: Clean the CPU surface thoroughly. Apply a thin, even layer of the provided thermal grease onto the CPU's integrated heat spreader (IHS). Peel off the protective sticker from the copper plate of the heatsink.
4. Muntar el dissipador de calor: Carefully place the heatsink onto the CPU, aligning the mounting holes with the brackets. Secure the heatsink by tightening the two screws on each side in an alternating pattern until snug.
5. Enganxeu el ventilador: Use the provided fan clips to secure the 120mm fan to the heatsink tower. Ensure the fan is oriented to blow air through the heatsink towards the rear of the case. Connect the 4-pin fan connector to the "CPU_FAN" header on your motherboard.

4.2. AMD Installation (AM5/AM4)

1. Prepareu la placa base: Remove the original AMD plastic retention frame from the motherboard. Keep the stock backplate, as it is needed for installation.
2. Install Standoffs and Brackets: Place the red AMD standoffs onto the stock backplate screws. Then, place the AMD mounting brackets on top of the standoffs and secure them with screw nuts.
3. Aplicar greix tèrmic: Clean the CPU surface thoroughly. Apply a thin, even layer of the provided thermal grease onto the CPU's integrated heat spreader (IHS). Peel off the protective sticker from the copper plate of the heatsink.
4. Muntar el dissipador de calor: Carefully place the heatsink onto the CPU, aligning the mounting holes with the brackets. Secure the heatsink by tightening the two screws on each side in an alternating pattern until snug.
5. Enganxeu el ventilador: Use the provided fan clips to secure the 120mm fan to the heatsink tower. Ensure the fan is oriented to blow air through the heatsink towards the rear of the case. Connect the 4-pin fan connector to the "CPU_FAN" header on your motherboard.

5. Especificacions

6. Performance Data

The ID-COOLING FROZN A410 SE CPU cooler demonstrates respectable thermal performance across various workloads. For low workloads (e.g., 120W TDP), it effectively keeps CPU temperatures low, comparable to other reputable air coolers in its class. At higher workloads (e.g., 250W TDP), the cooler maintains stable temperatures, proving capable for mid-range to higher-end CPUs, such as a 14700K, provided a proper fan curve is set.

It is important to note the fan noise characteristics: while the cooler performs well, the fans can become noticeably loud at maximum RPMs. Users are advised to configure a custom fan curve in their motherboard's BIOS to balance cooling performance with acoustic comfort, especially for sustained high-load operations. The cooler's design suggests that heat transfer efficiency is good, but optimizing fan speed is key to managing noise levels effectively.

7. Manteniment

• Neteja de pols: Regularly clean the heatsink fins and fan blades to prevent dust buildup, which can impede airflow and reduce cooling efficiency. Use compressed air or a soft brush.
• Inspecció del ventilador: Periodically check the fan for any signs of wear, damage, or unusual noise. Ensure the fan is securely attached and spinning freely.
• Pasta tèrmica: Reapply thermal paste if you remove the cooler from the CPU for any reason. Old thermal paste can dry out and lose effectiveness over time.
• Gestió de cables: Ensure fan cables are neatly routed and do not interfere with fan operation or other components.

8. Solució De Problemes

• Temperatures altes de la CPU:
  • Check if the heatsink is properly seated and making good contact with the CPU.
  • Verifiqueu que la pasta tèrmica s'hagi aplicat correctament i que no s'hagi assecat.
  • Ensure the fan is spinning and oriented correctly (blowing air through the heatsink).
  • Clean any dust buildup on the heatsink fins and fan blades.
• Soroll excessiu del ventilador:
  • Adjust the fan curve settings in your motherboard's BIOS to reduce fan speed at lower temperatures.
  • Comproveu si hi ha alguna obstrucció a les aspes del ventilador.
  • Assegureu-vos que el ventilador estigui ben muntat i que no vibri contra altres components.
• El ventilador no gira:
  • Confirm the 4-pin fan connector is securely plugged into the "CPU_FAN" header on the motherboard.
  • Check BIOS settings to ensure the CPU fan header is enabled and configured correctly.

9. Garantia i Suport

For warranty information and technical support, please refer to the official ID-COOLING weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.