1. Producte acabatview
The Maze Breaker 2 is an interactive robot designed for children aged 3 years and up. This robot features advanced capabilities including maze navigation, line following, and loop riding. Equipped with a built-in sensor, it can accurately follow printed or drawn tracks. It also includes programmable functions, an auto-balance system for two-wheel operation, voice recording, and the ability for multiple Maze Breaker robots to interact.
Figure 1: Maze Breaker 2 Robot. This image shows the robot's design, highlighting its LED eyes and compact form factor.
2. Informació de seguretat
- Edat recomanada: Suitable for children aged 3 years and up. Adult supervision is recommended for younger children.
- Seguretat de la bateria: Use only recommended battery types. Do not mix old and new batteries, or different types of batteries. Insert batteries with correct polarity. Remove batteries if the robot will not be used for an extended period.
- Perill d'asfixia: Small parts may be present. Keep away from children under 3 years of age.
- Entorn de funcionament: Operate the robot on clean, flat surfaces. Avoid water, extreme temperatures, and direct sunlight.
- Neteja: Clean with a dry, soft cloth. Do not use harsh chemicals or immerse in water.
3. Què hi ha a la caixa
En obrir el paquet, comproveu que hi hagi tots els components:
- 1 x Maze Breaker 2 Robot
- 1 x Manual d'instruccions (aquest document)
- 1 x Maze (pre-printed)
- Other accessories as specified on packaging (e.g., track markers if included)
Figure 2: Maze Breaker 2 Packaging. The box illustrates the robot's capabilities and included maze.
4. Configuració
- Instal·lació de la bateria: Locate the battery compartment on the robot (usually on the back or bottom). Open the compartment cover using a small screwdriver if necessary. Insert the required batteries (e.g., AAA, not included) ensuring correct polarity (+/-). Close the compartment securely.
- Encès: Locate the power switch (typically on the back or side of the robot). Slide the switch to the "ON" position. The robot's LED eyes should light up, indicating it is powered on.
- Col·locació inicial: Place the robot on a flat, smooth surface before beginning operation.
5. Instruccions de funcionament
5.1. Following a Track
The Maze Breaker 2 can follow a black line drawn on a white surface. Use a thick black marker (minimum 1 cm width) to draw a clear line. Place the robot's sensor (located on its underside) directly over the line. Activate the line-following mode (refer to specific button on robot, usually indicated by a line icon). The robot will then follow the drawn path.
Figure 3: Robot Following a Track. This image demonstrates the robot's line-following capability with a child observing.
5.2. Maze Navigation
The robot comes with a pre-printed maze. Place the robot at the designated start point within the maze. Activate the maze-breaking mode (refer to specific button on robot). The robot will use its sensors to navigate and find its way out of the maze.
5.3. Funcions programables
The Maze Breaker 2 offers basic programming capabilities. Consult the quick start guide or on-robot button labels for specific programming sequences. This typically involves pressing a record button, moving the robot manually or via simple commands, and then pressing play to execute the recorded sequence.
5.4. Enregistrament i reproducció de veu
To record your voice, locate the microphone and record button on the robot. Press and hold the record button, speak clearly into the microphone, then release the button. To play back the recorded voice, press the playback button. The robot will play your voice with a robotic effect.
5.5. Multi-Robot Interaction
Multiple Maze Breaker 2 robots can interact with each other. Ensure both robots are powered on and within close proximity. Specific interaction modes (e.g., dancing, synchronized movement) can be activated by pressing designated buttons on each robot. Refer to the robot's on-device instructions for detailed interaction commands.
5.6. Auto-Balance Function
The robot is designed with an auto-balance function, allowing it to maintain balance while moving on two wheels. This feature is typically active automatically when the robot is in motion.
6. Manteniment
- Neteja: Wipe the robot's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents. Avoid getting water into any openings.
- Emmagatzematge: When not in use, store the robot in a cool, dry place away from direct sunlight. If storing for an extended period, remove the batteries to prevent leakage.
- Substitució de la bateria: Replace batteries when the robot's performance diminishes or it fails to respond.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El robot no s'encén. | Les bateries estan esgotades o instal·lades incorrectament. | Comproveu la polaritat de la bateria. Substituïu-la per bateries noves. |
| Robot does not follow the line. | Line is too thin, light, or sensor is dirty. | Ensure line is thick and dark. Clean the sensor on the robot's underside. Ensure proper lighting. |
| Voice recording is unclear or not working. | Microphone blocked or recording distance too far. | Speak closer to the microphone. Ensure no obstructions. |
| Robot moves erratically or falls over. | Surface is uneven or batteries are low. | Operate on a flat, smooth surface. Replace batteries. |
8. Especificacions
| Característica | Detall |
|---|---|
| Dimensions del producte | 7 x 3.5 x 8 polzades |
| Pes de l'article | 11 unces |
| Número de model | 88493 |
| Edat recomanada | 3 anys i més |
| Fabricant | Silverlit SAS |
| Data de llançament | 8 de març de 2024 |
9. Vídeos oficials de productes
En aquest moment no hi ha vídeos oficials de productes del venedor disponibles per incrustar.
10. Garantia i Suport
For warranty information and customer support, please refer to the contact details provided on the product packaging or visit the official Silverlit weblloc web. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.
