1. Introducció
This manual provides essential information for the safe and efficient operation of your Sanpyl Water Pressure Pump, model MT24 25 100p. This pump is designed to enhance water pressure in various household and irrigation systems. Please read these instructions thoroughly before installation and use, and retain them for future reference.
2. Informació de seguretat
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. This device operates with electricity and water, requiring careful handling.
- Assegureu-vos que la font d'alimentació coincideixi amb el volum de la bombatage requirements (24V DC).
- No feu funcionar la bomba amb cables o endolls danyats.
- Avoid immersing the pump or power adapter in water.
- Desconnecteu l'alimentació abans de realitzar qualsevol manteniment o instal·lació.
- Mantingueu els nens i les persones no autoritzades allunyats de la bomba en funcionament.
- Install the pump in a dry, well-ventilated area, protected from direct weather exposure.
- The pump is rated IP56, indicating protection against dust and strong jets of water, but it is not submersible.
3. Contingut del paquet
Verifiqueu que tots els elements estiguin presents i no estiguin danyats en obrir el paquet:
- 1 x Water Pressure Pump (MT24 25 100p)
- 1 x Power Adapter (US Plug, 100-240V input)
- 1 x Threaded Pipe
- 1 x Manual d'usuari
- 2 x cargol
- 2 x Àncora
- 1 x Strong Adhesive Sticker
4. Especificacions
| Característica | Detall |
|---|---|
| Model | MT24 25 100p |
| Voltage | 24V DC |
| Endoll Voltage | 100-240V AC (for adapter) |
| Grau d'aïllament | Classe H |
| Grau IP | IP56 |
| Boosting Effect | 100 Pa |
| Potència del motor | 100W |
| Sound Noise | Baix soroll |
| Mode d'obertura | Manual and Water Automatic Control |
| Caudal | 25L Per Minute |
| Cap | 25M |
| Piping Inner Diameter | Aprox. 15 mm / 0.6 polzades |
| Temperatura ambiental | 0-40°C |
| Temperatura Mitjana | 4-80°C |
| Temperatura del fluid | 0-65°C |
| Pressió de sortida | 2 bar |
| Pressió màxima | 1 MPa |
| Mètode de connexió | Fil |
| Color | Blau |
| Material | ABS, coure |
5. Configuració i instal·lació
The Sanpyl Water Pressure Pump is designed for straightforward installation. It can be directly connected to your existing piping system.
5.1 Passos generals d'instal·lació
- Tria la ubicació: Select a suitable location near the water inlet pipe where pressure boosting is required. Ensure the area is dry and accessible.
- Preparació de les canonades: Turn off the main water supply. Drain the pipes. Cut into the water inlet pipe where the pump is to be installed.
- Connecteu la bomba: Use the provided threaded pipe and a wrench to securely connect the pump to the pipeline. Ensure all connections are tight to prevent leaks.
- Muntar la bomba: Secure the pump using the provided screws and anchors, or the strong adhesive sticker, to a stable surface.
- Connectar l'alimentació: Plug the power adapter into the pump and then into a suitable electrical outlet.
- Restore Water: Slowly turn on the main water supply and check for any leaks.
5.2 Esquemes d'instal·lació
Refer to the following diagrams for typical installation scenarios:
6. Instruccions de funcionament
The Sanpyl Water Pressure Pump features intelligent operation modes for optimal performance.
6.1 Engegada/apagada
- Mode manual: Press the power button (indicated by a circle with a vertical line) on the pump to manually turn it on or off.
- Mode automàtic: Once connected and powered, the pump can operate in automatic mode.
6.2 Smart Learning Function
The pump is equipped with a smart learning feature that analyzes water flow and pressure conditions to provide an effective boosting solution. This allows the pump to adapt to your specific water system needs.
6.3 Automatic Start and Stop
In automatic mode, the pump will detect water flow. It will automatically start when a water faucet is opened and stop when the faucet is closed, providing convenient on-demand pressure boosting.
6.4 Low Pressure Start Mode
If the water flow is too low to automatically trigger the pump's start, the device can switch to a low-pressure mode to initiate operation, ensuring consistent water pressure even with minimal flow.
6.5 Dry Running Protection
The pump includes a water shortage function. If the water input approaches zero, the pump will automatically stop to prevent damage from dry running, extending its lifespan.
6.6 Boosting Effect
Experience improved water flow and pressure after installation. The pump is designed to significantly enhance water output for faucets and showerheads.
7. Manteniment
Regular maintenance ensures the longevity and optimal performance of your water pressure pump.
- Neteja: Periodically wipe the exterior of the pump with a damp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
- Inspeccionar connexions: Regularly check all pipe connections for leaks. Tighten any loose connections.
- Filter Check (if applicable): If your system includes an inline filter, inspect and clean it as per its manufacturer's instructions to prevent debris from entering the pump.
- Hivernització: In areas prone to freezing temperatures, ensure the pump and associated pipes are drained or protected from freezing to prevent damage.
8. Solució De Problemes
If you encounter issues with your Sanpyl Water Pressure Pump, refer to the following common troubleshooting steps:
| Problema | Causa possible | Solució |
|---|---|---|
| La bomba no arrenca | No power; Water supply off; Low water pressure (in automatic mode); Pump in manual off state. | Check power connection; Ensure water supply is on; Open faucet fully to trigger low pressure start; Press power button to activate. |
| Low water pressure after pump installation | Incorrect installation; Air in the system; Clogged pipes/filter. | Review installation diagrams; Bleed air from the system; Check and clean any filters or pipes. |
| La bomba funciona contínuament | Leak in the system; Faucet not fully closed; Pump in manual on state. | Check for leaks in plumbing; Ensure all faucets are completely closed; Press power button to turn off manual mode. |
| La bomba és sorollosa | Air in the system; Loose mounting; Debris inside pump. | Bleed air from the system; Ensure pump is securely mounted; Contact customer support if noise persists. |
| La bomba s'atura de manera inesperada | Dry running protection activated (no water); Overheating. | Check water supply; Allow pump to cool down, then restart. Ensure proper ventilation. |
If the problem persists after attempting these solutions, please contact Sanpyl customer support.
9. Garantia i Suport
Sanpyl products are manufactured to high-quality standards. For warranty information and customer support, please refer to the warranty card included with your product or visit the official Sanpyl weblloc.
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Sanpyl customer service through their official channels. When contacting support, please have your product model number (MT24 25 100p) and purchase date available.
Sanpyl Official Store: Visit the Sanpyl Store on Amazon
