Introducció
Thank you for choosing the EZVALO Under Cabinet Lighting system. This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your new rechargeable puck lights. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.
Què hi ha a la caixa
Your EZVALO Under Cabinet Lighting package includes the following components:
- 6x Motion Sensor Puck Lights
- 1 x estació de càrrega
- 1x comandament a distància
- 6x Iron Filings (for adhesive mounting)
- 1 x manual d'instruccions
Configuració i instal·lació
The EZVALO puck lights offer versatile installation options to suit various surfaces and needs.
1. Charging the Puck Lights
Before first use, fully charge all puck lights. The included 3-in-1 charging station allows you to charge three puck lights simultaneously. Connect the charging station to a 5V2A or 5V3A power adapter (not included) using the provided USB cable.
Each puck light has a built-in 1000mAh battery. A full charge provides up to 8 hours of continuous light at 100% brightness in Always-On Mode, or 15-45 days in Auto Mode with typical use.
2. Mètodes d'instal·lació
The puck lights can be installed using three methods:
- Enganxament magnètic: The lights can snap directly onto any metal surface.
- Muntatge adhesiu: For non-metal surfaces, use the included iron filings. Remove the double-sided tape protective film from the iron plate, place it on the desired surface, and then magnetically attach the puck light.
- Built-in Hook: Each puck light features a built-in hook for hanging, offering flexibility for various applications.
Instruccions de funcionament
The EZVALO puck lights offer multiple operating modes and control options.
1. Power and Mode Selection (Puck Light Button)
Each puck light has a physical switch for basic power and mode selection:
- ACTIVITAT: Il·luminació contínua.
- DESACTIVAT: La llum està apagada.
- Motion Sensor Mode (Middle Position): The light will activate based on motion detection.
2. Funcionalitat del sensor de moviment
The motion sensor detects movement within a 120° range and up to 10 feet. It automatically turns off after 20 seconds of no motion.
- Mode de dia: Lights turn on whenever motion is detected, regardless of ambient light.
- Mode nocturn: Lights act as motion-sensor night lights, activating only in dark environments when motion is detected.
- Mode sempre activat: Motion sensor is disabled for continuous light.
3. Funcions de control remot
The included remote control provides comprehensive command over multiple puck lights simultaneously:
- ON/OFF: Encendre o apagar els llums.
- Dimecres: Adjust brightness with 10 levels (from 20 LM to 50 LM).
- Temperatura de color: Select from 3 white color temperatures (3000K Warm White, 4200K Natural White, 6500K Cool White).
- Colors RGB: Choose from 12 distinct RGB colors.
- Modes dinàmics: Activate Flash Mode (single color breathing change) or Fade Mode (12 color shifts cycling).
- Temporitzadors: Set automatic shut-off timers for 15, 30, 45, 60, or 120 minutes.
- Bypass del sensor: When in Always-On Mode, the remote allows manual control, bypassing the motion sensor.
4. Button Control (On-Puck)
For quick adjustments, you can use the built-in button on each puck light:
- Premsa única: Cycles through different light colors.
- Premsa llarga: Adjusts brightness levels.
Manteniment
1. Neteja
To clean the puck lights and charging station, use a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish or electronic components. Ensure the devices are powered off and unplugged before cleaning.
2. Cura de la bateria
The puck lights contain built-in Lithium-Ion batteries. To maximize battery life:
- Eviteu descarregar completament les bateries amb freqüència.
- Charge the lights regularly, especially if they are used in Always-On mode.
- Guardeu els llums en un lloc fresc i sec si no els feu servir durant períodes prolongats.
Resolució de problemes
- Els llums no s'encenen: Ensure the puck light is charged and the switch is set to 'ON' or a motion sensor mode. Check the remote control battery if using remote.
- El sensor de moviment no respon: Verify the switch is in the motion sensor position. Ensure there are no obstructions blocking the sensor. In Night Mode, confirm the environment is sufficiently dark.
- Lights not charging: Check that the USB cable is securely connected to both the charging station and a functional power source. Ensure the puck lights are correctly seated in the charging station.
- El comandament a distància no funciona: Check the remote's battery. Ensure there is a clear line of sight between the remote and the puck lights.
- Lights dim or inconsistent: Recharge the puck lights. If the issue persists, contact customer support.
Especificacions
| Característica | Detall |
|---|---|
| Marca | EZVALO |
| Número de model | EZL2415A |
| Color | Blanc |
| Material | Estirol acrilonitril butadiè |
| Forma de llum | Puck |
| Dimensions del producte | 3.3 cm de llargada x 3.3 cm d'amplada x 1 cm d'alçada |
| Pes de l'article | 1.5 lliures (per a un paquet de 6) |
| Font d'alimentació | Battery Powered (1000mAh Lithium Ion, included) |
| Tipus de font de llum | LED |
| Voltage | 5 Volts |
| Brillantor | 50 lúmens (màx.) |
| Característiques especials | Adjustable Color Temperature, Charging Station, Color Changing, Dimmable, Motion Sensor |
| Mètode de control | Control remot, tàctil |
| Tipus d'instal·lació | Magnetic, Adhesive, Hook |
| Ús interior/exterior | Interior |
Garantia i Suport
For any product inquiries, technical assistance, or warranty claims, please contact EZVALO customer support. Refer to the contact information provided with your product packaging or visit the official EZVALO weblloc per obtenir més informació.
Optional protection plans are available for purchase separately to extend coverage beyond the standard product warranty. Please refer to the specific terms and conditions of these plans for details.
