Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your ASD LED Motion Sensor Outdoor Flood Light, Model A-SFL-20BK. This advanced outdoor lighting solution features a 180° motion sensor, multiple lighting modes, adjustable color temperature, and rotatable light heads for optimal illumination and security.
Imatge: The ASD LED Motion Sensor Outdoor Flood Light, Model A-SFL-20BK, shown with its packaging. This image illustrates the product's design and included components.
Informació de seguretat
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury. Keep this manual for future reference.
- Seguretat elèctrica: Always turn off power at the circuit breaker before installing or servicing the fixture. Ensure all wiring connections are secure and comply with local electrical codes.
- Posada a terra: The fixture must be properly grounded to prevent potential electrical shock.
- Electricista qualificat: Si teniu dubtes sobre alguna part del procés d'instal·lació, consulteu un electricista qualificat.
- Temperatura de funcionament: Do not operate the fixture outside its specified temperature range.
- Ubicacions humides: This fixture is rated IP65 for wet locations, but ensure all seals and connections are properly secured during installation to maintain this rating.
Configuració i instal·lació
Follow these steps for proper installation of your flood light. Ensure power is OFF at the circuit breaker before proceeding.
1. Prepareu-vos per a la instal·lació
- Unpack the fixture and inspect for any damage.
- Ensure all necessary mounting hardware is present.
- Desconnecteu l'alimentació a l'interruptor principal.
2. Muntatge del dispositiu
- Connecteu el suport de muntatge a la caixa de connexió amb els cargols proporcionats.
- Feed the electrical wires from the junction box through the gasket and into the fixture's wiring compartment.
- Fixeu l'aparell al suport de muntatge.
3. Connexions de cablejat
- Connecteu el negre cable des del dispositiu fins al black (live) cable de la font d'alimentació.
- Connecteu el blanc cable des del dispositiu fins al blanc (neutre) cable de la font d'alimentació.
- Connecteu el green (ground) cable des del dispositiu fins al green or bare copper (ground) cable de la font d'alimentació.
- Ensure all connections are secured with wire nuts and tucked neatly into the junction box.
4. Adjusting Light Heads
The light heads are rotatable 150° side-to-side and 180° up-and-down. Adjust them to cover your desired illumination area.
Imatge: Illustration showing the 180° up-and-down and 150° side-to-side rotation capabilities of the flood light heads, allowing for precise light direction.
Imatge: Detailed product specification diagram showing dimensions (10-1/4" L x 4-7/16" W x 6-13/16" H) and key features like motion sensor, photocell, 20W power, 5CCT, 2045lm brightness, and IP65 wet location rating.
Instruccions de funcionament
Your ASD LED Flood Light offers versatile operation modes and customizable settings.
1. Selecting Lighting Modes
Use the control dial on the motion sensor to select one of three operating modes:
- PUNTUAL: The light functions as a standard lamp, staying on continuously without motion sensing.
- DUSK TO DAWN (D2D): The light automatically turns on at dusk and off at dawn, based on ambient light levels detected by the photocell.
- AUTOMÀTIC: The light turns on and off based on motion detection and your selected lux requirement settings (L - Low sensitive / M - Middle sensitive / H - High sensitive).
Imatge: Diagram illustrating the control dial for selecting ON TIME, D2D (Dusk to Dawn), and AUTO modes, with visual examples of how the light behaves in each setting.
Imatge: The flood light operating at night, demonstrating the built-in dusk-to-dawn photocell functionality which automatically activates the light when ambient light levels drop.
2. Configuració del sensor de moviment
The integrated 180° motion sensor has a detection range of up to 60 feet. In AUTO mode, you can adjust the sensitivity:
- L (Low Sensitive): Less sensitive to movement, ideal for areas with minimal activity.
- M (Middle Sensitive): Sensibilitat estàndard per a ús general.
- H (High Sensitive): Most sensitive to movement, suitable for high-traffic areas or enhanced security.
You can also adjust the 'Hold Time' (how long the light stays on after motion is detected) and 'Ambient Light' (lux level at which the sensor becomes active) settings using the respective dials on the sensor unit.
Imatge: A person walking in front of a garage, demonstrating the 180° detection angle of the high-sensitive motion sensor, which activates the flood light.
Imatge: Diagram showing the flexible settings for the motion sensor, including Ambient Light (less than 10 lux), Hold Time (10 seconds to 10 minutes), and Detection Motion Speed (0.6-1.5 m/s), with a visual representation of the 60ft detection distance.
3. Ajust de la temperatura de color (CCT)
The fixture offers 5 selectable color temperatures, ranging from warm to daylight. To change the CCT, locate the CCT switch on the fixture and slide it to your desired setting:
- 2700K: Blanc suau
- 3000K: Blanc càlid
- 3500K: Blanc neutre
- 4000K: Blanc fresc
- 5000K: Llum del dia
Imatge: Visual representation of the 5 CCT options (2700K, 3000K, 3500K, 4000K, 5000K) and how they appear when the flood light is active, allowing users to select their preferred light ambiance.
Manteniment
Un manteniment regular garanteix un rendiment òptim i una llarga durada del vostre llum d'inundació.
- Neteja: Netegeu periòdicament l'aparell amb un drap suau iamp drap. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar l'acabat o els components elèctrics.
- Inspecció: Annually inspect the wiring and mounting hardware for any signs of wear, corrosion, or loosening. Tighten connections as needed.
- Lent del sensor: Keep the motion sensor lens clean and free from obstructions (e.g., dirt, spiderwebs) to ensure proper operation.
Resolució de problemes
If you experience issues with your flood light, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No power, faulty wiring, incorrect mode setting, photocell detecting too much light. | Check circuit breaker. Verify wiring connections. Ensure mode is set to AUTO or ON TIME. Cover photocell to test if it's detecting light. |
| La llum es manté encesa contínuament. | Mode set to ON TIME or D2D, constant motion detected, sensor sensitivity too high. | Switch mode to AUTO. Reduce motion sensor sensitivity (L setting). Check for constant heat sources or movement in detection zone. |
| El sensor de moviment no detecta moviment. | Sensor obstructed, sensitivity too low, incorrect ambient light setting. | Clean sensor lens. Increase sensor sensitivity (H setting). Adjust ambient light setting on the sensor. Ensure sensor is aimed correctly. |
| La llum parpelleja o s'atenua. | Loose wiring, voltage fluctuations, incompatible dimmer (if applicable). | Check and tighten all wiring connections. Consult an electrician for voltage issues. This fixture is not designed for use with dimmers. |
Especificacions del producte
- Marca: ASD
- Nom del model: SFL A-SFL-20BK
- Número de peça: A-SFL-20BK
- Color: Black with Motion Sensor
- Material: Alumini, Policarbonat
- Estil: Modern
- Forma de llum: Reflector
- Tipus d'habitació: Espais exteriors
- Dimensions del producte: 10.24 cm de llargada x 4.45 cm d'amplada x 6.81 cm d'alçada
- Usos específics per al producte: A l'aire lliure
- Ús interior/exterior: A l'aire lliure
- Font d'alimentació: Cablejat
- Tipus d'instal·lació: Muntatge d'escorredor
- Característiques especials: 180° 3 Modes Motion Sensor and Photocell, 5 Color Temperature Options, Beam Angle 100°, Rotatable Light Heads for Directional Light Control, Wet Locations Rated (IP65)
- Mètode de control: Remote (referring to sensor adjustments, not a physical remote)
- Tipus de font de llum: LED
- Voltage: 120 Volts
- Mètode d'il·luminació: Ajustable
- Pes de l'article: 1 lliures
- Wattage: 20 watts
- Recompte d'unitats: 1.0 recompte
- Tipus de muntatge: Muntatge de paret
- Tipus de fixació: No desmuntable
- UPC: 810128113458
- Certificacions: UL, DLC Premium
- Vida útil: 145,000 hores
Informació de la garantia
This ASD LED Motion Sensor Outdoor Flood Light (Model A-SFL-20BK) is covered by a Garantia limitada d'5 any from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.
For warranty claims or further details, please retain your proof of purchase and contact customer support.
Atenció al client
If you have any questions, require technical assistance, or need to report an issue with your ASD LED Motion Sensor Outdoor Flood Light, please contact our customer support team.
Please visit the official ASD website for the most current contact information, including phone numbers, email addresses, and online support resources.
Recursos en línia: Visit the ASD Store on Amazon
