1. Introducció
This manual provides comprehensive instructions for the setup, operation, and maintenance of your SYNLETT Bed Alarm Caregiver Pager System D29G2. This system is designed to assist caregivers in monitoring individuals, particularly the elderly or those with dementia, by providing alerts for movement or bed exit, thereby aiding in fall prevention and ensuring timely assistance.
Image 1.1: The SYNLETT Bed Alarm Caregiver Pager System, including the pager and two motion sensors.
2. Contingut del paquet
Si us plau, verifiqueu que tots els elements que s'enumeren a continuació estiguin inclosos al vostre paquet:
- 1 x Caregiver Pager Receiver
- 2 x Wireless Motion Sensors
- 8 x AA Batteries (for motion sensors)
- Wall Mount Accessories (screws, adhesive tape)
- 1 x Manual d'usuari
Image 2.1: All components included in the SYNLETT Bed Alarm Caregiver Pager System package.
3. Especificacions del producte
| Característica | Especificació |
|---|---|
| Marca | SYNLETT |
| Número de model | D29G2 |
| Color | Blanc |
| Power Source (Motion Sensor) | 8 piles AA (incloses) |
| Màxim abast sense fil | Up to 150 meters (500 feet) in open areas |
| Tipus de muntatge | Wall Mount, Desk Placement |
| Dimensions del producte | 5.12 x 3.94 x 3.35 polzades (aproximadament) |
| Pes de l'article | 0.47 quilograms (1.04 lliures) |
4. Instruccions de configuració
4.1. Instal·lació de la bateria
- For Motion Sensors: Open the battery compartment cover on the back of each motion sensor. Insert 4 AA batteries into each sensor, ensuring correct polarity (+/-). Close the cover securely.
- For Caregiver Pager: The pager typically uses an AC adapter (optional, not included) or batteries. If using batteries, open the compartment and insert the required batteries (refer to the pager unit for specific battery type, usually AA or AAA).
4.2. Motion Sensor Placement
Strategic placement of the motion sensors is crucial for effective monitoring and fall prevention. Consider the following guidelines:
- Bedside Monitoring: Place a motion sensor adjacent to the bed, on the floor, or a bedside table. Position it to detect movement when an individual attempts to exit the bed.
Image 4.1: Motion sensor positioned for bedside monitoring.
- Doorway/Exit Monitoring: Install a motion sensor near a doorway or exit to detect wandering or unauthorized departures.
Image 4.2: Motion sensor placed to monitor a doorway.
- Zones perilloses: Position sensors in areas where falls are likely, such as near stairs or bathroom entrances.
- Opcions de muntatge: Sensors can be placed on a flat surface using their convertible bottom stand or mounted on a wall using the included screws or adhesive tape. The rotatable bracket allows for flexible positioning.
Image 4.3: Motion sensor mounting options.
Imatge 4.4: Ex.amples of flexible placement for the motion sensor and pager.
4.3. Adjusting Motion Sensor Sensitivity and Range
The motion sensor's infrared range can be adjusted to suit the monitoring area.
Image 4.5: Motion sensor infrared detection range.
The wireless signal range between the motion sensor and the pager can extend up to 500 feet in open areas. Environmental factors like concrete walls or electronic equipment may affect this range.
Image 4.6: Wireless communication range between sensor and pager.
5. Instruccions de funcionament
5.1. Caregiver Pager Operation
- Encès/apagat: Ensure batteries are installed or the AC adapter is connected. The pager will power on automatically.
- Ajust de volum: Use the volume knob or switch on the side of the pager to adjust the alert volume to low, medium, or high.
Image 5.1: Pager volume control.
- Alert Tone Selection: The pager offers two alert tones: "DINGDONG" for a chime/doorbell sound and "ALARM" for a continuous siren. Use the switch on the pager to select your preferred alert mode or turn it "OFF" for silent monitoring (visual indicator only).
Image 5.2: Pager alert tone selection switch.
- Portabilitat: The pager can be carried in a pocket or clipped to a belt for caregiver mobility.
Image 5.3: Caregiver wearing the portable pager.
5.2. Funcionament del sensor de moviment
- Interruptor de mode: Each motion sensor has a switch with three positions:
- ENVIAR: In this mode, the sensor transmits a signal to the pager upon detecting movement.
- DESACTIVAT: The sensor is powered off.
- PUSH: The sensor transmits a signal to the pager when the button on the front is manually pressed. This can be used as a call button.
- Indicador LED: A blue LED indicator on the sensor illuminates when motion is detected or the button is pressed, confirming signal transmission.
Image 5.4: Motion sensor controls and pager features.
6. Manteniment
- Neteja: Wipe the devices with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
- Substitució de la bateria: Replace batteries in the motion sensors and pager when the performance degrades or the low battery indicator (if present) activates. Always use new batteries of the specified type.
- Emmagatzematge: If storing the system for an extended period, remove all batteries to prevent leakage.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Pager does not alert when motion is detected. |
|
|
| Falses alarmes. |
|
|
| Curt abast sense fil. |
|
|
8. Informació de la garantia
SYNLETT products are covered by a limited manufacturer's warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or contact SYNLETT customer support directly. Keep your purchase receipt as proof of purchase for warranty claims.
9. Atenció al client
If you encounter any issues or have questions not addressed in this manual, please contact SYNLETT customer support for assistance. Contact information can typically be found on the product packaging, the SYNLETT official weblloc web o a través del vostre distribuïdor.
