Introducció
This manual provides essential information for the safe and proper use of your Moni i-Size Multi Infant Car Seat. Designed for infants from 40 to 87 cm in height (Group 0+), this car seat ensures maximum safety and comfort for your child. Please read these instructions carefully before use and keep them for future reference.
Informació important de seguretat
- Always install the car seat rear-facing in the vehicle. This is the safest way for infants to travel.
- Ensure the 3-point safety harness is correctly fastened and adjusted to your child's size.
- No deixeu mai el vostre fill sense vigilància al seient del cotxe.
- No utilitzeu la cadireta del cotxe si ha estat involucrada en un accident, fins i tot si no hi ha danys visibles.
- Consulteu el manual del propietari del vostre vehicle per obtenir les pautes específiques d'instal·lació del seient de cotxe.
- The car seat is suitable for children from birth up to 13 kg.
Components del producte
The Moni i-Size Multi Infant Car Seat includes the following main components:
- Ergonomic carrying handle (3-position adjustable)
- Adjustable memory foam headrest
- Capota solar ajustable i extraïble
- 3-point safety harness with shoulder pads and lower buckle covers
- Soft full-body support cushion
- Funda extraïble i rentable
Image: Moni i-Size Multi Infant Car Seat with the footmuff attached, showing the overall design and carrying handle.
Image: Moni i-Size Multi Infant Car Seat without the footmuff, highlighting the internal padding and harness system.
Configuració i instal·lació
This car seat is designed for rear-facing installation using the vehicle's 3-point seat belt.
Installing the Car Seat in Your Vehicle
- Place the car seat on the vehicle seat, ensuring it is positioned rear-facing.
- Route the vehicle's 3-point seat belt through the designated belt guides on the car seat. Refer to the labels on the car seat for correct routing.
- Fasten the vehicle's seat belt buckle.
- Pull the shoulder belt tightly to remove any slack, ensuring the car seat is securely fastened and does not move more than 1 inch (2.5 cm) from side to side or front to back at the belt path.
- Ensure the carrying handle is in the upright or designated travel position as per the instructions.
Imatge: Lateral view of the car seat, illustrating the correct belt path for vehicle installation.
Ajust del reposacaps
The memory foam headrest is adjustable to accommodate your child's growth. Locate the adjustment mechanism (usually a lever or button at the back or top of the headrest) and slide the headrest up or down until it is at the correct height for your child's shoulders.
Imatge: Primer pla view of the adjustable headrest and the 3-point harness system.
Instruccions de funcionament
Assegurant el teu fill
- Col·loqueu el vostre fill al seient del cotxe.
- Ajunta les dues llengüetes de la sivella i introdueix-les a la sivella fins que sentis un clic.
- Pull the harness adjustment strap to tighten the harness until it is snug against your child's body. You should not be able to pinch any slack in the harness straps at the child's collarbone.
- Ensure the shoulder pads are positioned correctly over your child's shoulders.
Imatge: Frontal view of the car seat showing the 3-point harness system properly fastened.
Adjusting the Carrying Handle
The ergonomic carrying handle can be adjusted to 3 positions. Press the buttons on both sides of the handle simultaneously and rotate the handle to the desired position (carrying, stable base, or storage).
Image: Car seat with the carrying handle in the upright position, ready for transport.
Ús de la capota solar
The sun canopy is adjustable and removable. Extend or retract the canopy as needed to protect your child from direct sunlight. To remove, detach it from its anchor points on the car seat frame.
Manteniment i cura
Cleaning the Fabric Cover
The fabric cover is removable and washable.
- Carefully remove the fabric cover from the car seat frame.
- Wash the cover at 30 degrees Celsius (86 degrees Fahrenheit) using a mild detergent.
- Do not bleach, tumble dry, or iron the cover.
- Deixeu que la funda s'assequi completament a l'aire abans de tornar-la a fixar al seient del cotxe.
Neteja del marc
Netegeu les parts de plàstic i metall de l'estructura del seient del cotxe amb anuncisamp drap i sabó suau. No utilitzeu netejadors abrasius ni dissolvents.
Resolució de problemes
Car Seat Feels Loose After Installation
Ensure the vehicle's 3-point seat belt is routed correctly through all designated belt guides and pulled tightly. The car seat should not move more than 1 inch (2.5 cm) at the belt path. Re-read the installation instructions and consult your vehicle's manual.
Harness is Difficult to Adjust
Check for any twists in the harness straps. Ensure the harness adjustment strap is not obstructed. If the harness is still stiff, ensure the child is not leaning against the straps, which can create tension.
Buckle is Sticking
Clean the buckle area. Food crumbs or debris can cause sticking. Do not lubricate the buckle. If the issue persists, contact customer support.
Especificacions del producte
| Característica | Detall |
|---|---|
| Model | i-Size Multi |
| Edat recomanada | From birth |
| Capacitat de pes | 0 a 13 kg |
| Height Capacity (Rear-facing) | 40 a 87 cm |
| Dimensions del producte (L x A x A) | 42 x 33 x 73 cm |
| Pes del producte | 3 kg |
| Composició del material | 100% Polyester Fabric |
| Tipus d'arnès | Arnés de seguretat de 3 punts |
| Tipus d'instal·lació | Vehicle 3-point seat belt (rear-facing) |
| Compatibilitat | Compatible with Moni Kali, Tokyo, Rio, Ciara, Rafaello strollers (strollers not included) |
Garantia i assistència al client
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact Moni customer service. Keep your proof of purchase for any warranty claims.
For further assistance, please visit the official Moni weblloc web o poseu-vos en contacte amb la seva línia d'atenció al client.
