Introducció
This manual provides comprehensive instructions for the Cambridge Audio CX Series 2 Remote Control. This remote is designed to seamlessly operate your Cambridge Audio CX Series 2 products, including the CXN100, CXA61, CXA81, CXC, and CXN Series 2 components. It is also backward compatible with CX Series 1 products.
Image: The Cambridge Audio CX Series 2 Remote Control, a sleek black remote with numerous buttons for various functions.
Configuració
Instal·lació de la bateria
The CX Series 2 Remote Control requires two (2) AAA batteries for operation. These batteries are typically included with your purchase.
- Locate the battery compartment on the rear of the remote control.
- Feu lliscar la tapa de la bateria cap avall o en la direcció indicada per una fletxa per obrir-la.
- Introduïu dues piles AAA, assegurant-vos que els terminals positiu (+) i negatiu (-) s'alineïn correctament amb les marques de l'interior del compartiment.
- Torneu a col·locar la tapa de la bateria fent-la lliscar fins que faci clic de manera segura.
Ús inicial
Once batteries are installed, the remote control is ready for use. As an infrared (IR) remote, it does not require pairing. Simply point the remote towards your Cambridge Audio CX Series 2 component and press the desired function button.
Instruccions de funcionament
The CX Series 2 Remote Control features an ergonomic design with clearly labeled buttons for intuitive control of your Cambridge Audio devices. The remote is designed to control up to 5 compatible devices.
S'han acabat les funcions del botóview
- Botó d'encesa: Turns the connected Cambridge Audio component on or off.
- Source Selection Buttons: Dedicated buttons for selecting different input sources (e.g., CD, Network, Analog).
- Control de volum: Adjusts the audio output level (Up/Down).
- Botó de silenci: Temporarily silences the audio output.
- Navigation Pad (Arrow Keys & Enter): Used for navigating menus and confirming selections on compatible devices like the CXN100 or CXN Series 2 network players.
- Controls de reproducció: Buttons for Play, Pause, Stop, Skip Forward, Skip Backward (for CD players or network players).
- Display/Info Button: Toggles display information or accesses device information.
- Menu/Setup Buttons: Accesses device settings and configuration menus.
Image: A Cambridge Audio audio system setup, including a network player, amplifier, and CD transport, demonstrating the types of devices compatible with the remote.
Nota de compatibilitat
While primarily designed for CX Series 2 products, this remote control is also compatible with Cambridge Audio CX Series 1 products, offering versatile control across your Cambridge Audio ecosystem.
Manteniment
Neteja del comandament a distància
To maintain the appearance and functionality of your remote control, clean it regularly with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the surface or internal components.
Canvi de bateria
Replace batteries when the remote's responsiveness decreases or if the indicator light (if present) signals low power. Always replace both batteries simultaneously with new AAA alkaline batteries to ensure optimal performance.
Resolució de problemes
Si teniu problemes amb el comandament a distància, consulteu els passos habituals següents per resoldre problemes:
- El comandament a distància no respon:
- Comproveu si les piles estan correctament inserides amb la polaritat correcta.
- Substituïu les piles velles per unes de noves.
- Ensure there is a clear line of sight between the remote's IR emitter and the receiver on your Cambridge Audio component. Obstructions can block the signal.
- Verify that the remote is pointed directly at the component you wish to control.
- Interval limitat:
- Assegureu-vos que les piles siguin noves.
- Reduce the distance between the remote and the component.
- Remove any potential sources of infrared interference (e.g., strong sunlight, other IR devices).
- Botons específics que no funcionen:
- Confirm that the remote is set to control the correct device if it has device selection modes (though this model is primarily for CX Series).
- Clean the remote's surface, especially around the unresponsive buttons, to ensure no debris is preventing button presses.
If problems persist after attempting these steps, please contact Cambridge Audio customer support for further assistance.
Especificacions
| Nom del model | CX Series 2 Remote |
| Dispositius compatibles | Cambridge Audio CXN100, CXA61, CXA81, CXC, CXN Series 2, and CX Series 1 products |
| Tipus de controlador | Control de botons |
| Tecnologia de connectivitat | Infrarojos (IR) |
| Característica especial | Ergonòmic |
| Color | Negre |
| Piles necessàries | 2 x AAA (incloses) |
| Pes de l'article | 6.3 unces |
| Dimensions del paquet | 10.83 x 3.35 x 0.98 polzades |
Garantia i Suport
For information regarding product warranty, please refer to the documentation provided with your Cambridge Audio product or visit the official Cambridge Audio website. For technical support, troubleshooting beyond this manual, or service inquiries, please contact Cambridge Audio customer support directly.
You can find more information and contact details on the official Cambridge Audio weblloc: www.cambridgeaudio.com
