Genérico TREO MAGNUM8 8-Inch High-Performance Subwoofer Instruction Manual

Introducció

Welcome to the instruction manual for your new Genérico TREO MAGNUM8 High-Performance Subwoofer. This 8-inch, 1200-watt subwoofer is engineered to deliver powerful and clear bass for your audio system. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your product.

Informació de seguretat

• Desconnecteu sempre l'alimentació abans de la instal·lació o el manteniment.
• Ensure proper wiring and impedance matching to prevent damage to the subwoofer and ampmés viu.
• Eviteu exposar el subwoofer a una humitat excessiva o a temperatures extremes.
• Install the subwoofer securely to prevent movement during vehicle operation.
• Consulteu un instal·lador professional si no teniu clars els passos d'instal·lació.

Contingut del paquet

• 1 x Genérico TREO MAGNUM8 High-Performance Subwoofer

Característiques

• 600 Watts RMS Power, 1200 Watts MAX Power
• Dual 4 + 4 Ohms Impedance
• Frequency Response: 30Hz - 800Hz
• Sensitivity: 89 dB/w/m
• 2" Aluminum BASV DVC Voice Coil
• 60 Oz. Magnet with cooling technology
• Non-pressed paper cone with stitched suspension
• Reinforced NOMEX spider
• Terminals de tipus push
• Cistella d'acer

Especificacions

Configuració i instal·lació

Una instal·lació correcta és crucial per a un rendiment i una seguretat òptims.

Selecció de tancaments

The MAGNUM8 subwoofer requires a suitable enclosure (sealed or ported) designed for an 8-inch driver. Consult car audio resources or a professional for recommended enclosure volumes and port tuning frequencies.

Wiring the Dual Voice Coil (DVC)

The MAGNUM8 features a Dual Voice Coil (DVC) design with two 4-ohm voice coils. This allows for flexible wiring configurations to match your amprequisits d'impedància del transformador.

Parallel Wiring (2 Ohms Total Impedance)

Connect the positive terminal of voice coil 1 to the positive terminal of voice coil 2. Connect the negative terminal of voice coil 1 to the negative terminal of voice coil 2. Then, connect the combined positive to the ampla sortida positiva del lificador i la negativa combinada a la ampsortida negativa del transformador. Aquesta configuració resulta en una càrrega de 2 ohms.

Series Wiring (8 Ohms Total Impedance)

Connect the positive terminal of voice coil 1 to the amplifier's positive output. Connect the negative terminal of voice coil 1 to the positive terminal of voice coil 2. Connect the negative terminal of voice coil 2 to the ampsortida negativa del transformador. Aquesta configuració resulta en una càrrega de 8 ohms.

Important: Always verify the final impedance with a multimeter before connecting to your amplificador. Una impedància incorrecta pot danyar el vostre ampamplificador o subwoofer.

Muntatge

Securely mount the subwoofer into the chosen enclosure using appropriate screws. Ensure a tight seal to prevent air leaks, which can degrade sound quality.

AmpConnexió més viva

Connect the subwoofer's terminals to your amplifier's subwoofer output. Ensure correct polarity (positive to positive, negative to negative).

Imatge: Frontal view of the Genérico TREO MAGNUM8 8-inch subwoofer, showcasing the black cone with the 'TREO' logo.

Imatge: Lateral view of the Genérico TREO MAGNUM8 subwoofer retail box, showing product branding and specifications.

Imatge: Superior view of the Genérico TREO MAGNUM8 subwoofer retail box, highlighting the 'MAGNUM8' model name and '1200W MAX POWER'.

Imatge: Part posterior view of the Genérico TREO MAGNUM8 subwoofer retail box, showing the magnet structure and terminal connections.

Image: Back of the Genérico TREO MAGNUM8 subwoofer retail box, displaying technical specifications in multiple languages.

Imatge: Anglesa view of two Genérico TREO MAGNUM8 subwoofers, illustrating both the front cone and the magnet structure with power ratings.

Instruccions de funcionament

Encesa inicial

After installation, turn on your audio system at a low volume. Gradually increase the volume and bass levels to ensure proper operation and to identify any potential issues.

Període de rodament

Allow a break-in period of approximately 10-20 hours of normal listening before operating the subwoofer at high volumes. This allows the suspension components to loosen and perform optimally.

AmpConfiguració del lifier

Ajusta el teu amplifier's gain, crossover frequency, and phase settings according to your system's requirements and personal preference. Refer to your amplifier's manual for detailed instructions.

• Guany: Set the gain to match the output voltage of your head unit. Avoid setting the gain too high, as this can lead to distortion and damage.
• Filtre de pas baix (LPF): Typically set between 60Hz and 100Hz for subwoofers. This ensures only low frequencies are sent to the subwoofer.
• Filtre subsònic: If available, set this filter slightly below your enclosure's tuning frequency to protect the subwoofer from over-excursion at very low frequencies.
• Fase: Adjust the phase (0° or 180°) to ensure the subwoofer's output is in sync with your main speakers, providing cohesive bass response.

Manteniment

• Keep the subwoofer cone free from dust and debris. Use a soft, dry cloth for cleaning.
• Avoid touching the cone or surround with sharp objects.
• Regularly check wiring connections for tightness and corrosion.
• Assegureu-vos que la ventilació sigui adequada al voltant del subwoofer i amplificador per evitar el sobreescalfament.

Resolució de problemes

No hi ha so del subwoofer

• Comproveu totes les connexions d'alimentació, terra i engegada remota del ampmés viu.
• Verify RCA signal cables are securely connected to both the head unit and ampmés viu.
• Assegureu-vos el amplifier is powered on (indicator light should be illuminated).
• Comproveu el amplifier's fuses.
• Confirm the head unit's subwoofer output is enabled and volume is up.
• Inspect subwoofer wiring for correct polarity and secure connections.

So distorsionat

• Reduir el ampajust de guany del lificador.
• Check for proper crossover settings; the LPF might be set too high.
• Ensure the subwoofer is not over-driven. Reduce volume.
• Verifiqueu que la carcassa estigui correctament segellada (si escau) i que no hi hagi sorolls.

greus febles

• Augmentar el amplifier's gain or head unit's subwoofer level.
• Adjust the phase setting (0° or 180°) on the amplificador o unitat principal.
• Check for proper enclosure volume and tuning.
• Assegureu-vos que tot el cablejat sigui correcte i segur.

Garantia i Suport

The Genérico TREO MAGNUM8 Subwoofer comes with a limited warranty. Please retain your proof of purchase for warranty claims. For technical support or warranty inquiries, please contact your retailer or the manufacturer.

Nota: Damage caused by improper installation, abuse, or unauthorized modifications is not covered under warranty.