Manual d'instruccions del suport de paret per a altaveus WALI per a Sonos Era 100 (model SON005-2B)

Introducció

This manual provides detailed instructions for the installation and use of your WALI Speaker Wall Mount, designed specifically for the Sonos Era 100 speaker. Please read these instructions carefully before installation to ensure proper setup and safe operation. This product is intended for mounting Sonos Era 100 speakers to a wall, offering adjustable positioning for optimal sound delivery.

Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació. Si falta alguna peça o hi ha alguna peça danyada, poseu-vos en contacte amb el servei d'atenció al client.

• 2 x WALI Speaker Wall Mounts for Sonos Era 100
• 1 x Manual d'usuari (aquest document)
• Maquinari de muntatge (cargols, ancoratges)

Image: Two WALI speaker wall mounts, each holding a Sonos Era 100 speaker, shown from a front-side perspective.

Informació de seguretat

Adhere to the following safety guidelines to prevent injury or damage:

• Capacitat de pes: Do not exceed the maximum weight capacity of 6.6 lbs (3 kg) per mount. This mount is designed specifically for the Sonos Era 100 speaker.
• Tipus de paret: Ensure the mounting surface can safely support the combined weight of the mount and speaker. Do not mount on drywall alone without securing to a wood stud or concrete/brick wall.
• Eines: Use appropriate tools for installation. If unsure, consult a qualified professional.
• Nens: Mantingueu les peces petites allunyades dels nens per evitar perills d'asfixia.

Configuració i instal·lació

Follow these steps for secure installation of your speaker wall mount.

Image: Illustration of compatible wall types: Brick Wall (Yes), Wood Stud (Yes), Concrete Wall (Yes). A note indicates: 'Do not mount on drywall alone'.

Image: A four-panel diagram illustrating the installation process. Panel 1a shows mounting the wall plate on wood studs. Panel 1b shows mounting on brick or concrete walls. Panel 2 depicts product assembly. Panel 3 shows affixing the speaker to the bracket. Panel 4 illustrates securely hanging the assembled bracket onto the wall plate.

1. Placa de paret de muntatge:
   • Per a montants de fusta: Locate a wood stud. Mark and drill pilot holes. Secure the wallplate using the provided screws directly into the stud.
   • Per a parets de maó o formigó: Mark and drill pilot holes. Insert wall anchors into the drilled holes. Secure the wallplate using the provided screws into the anchors.
2. Muntatge del producte: Attach the speaker's base plate to the mounting arm using the provided screws. Ensure it is securely fastened.
3. Affix the Speaker: Carefully place your Sonos Era 100 speaker onto the assembled bracket. Secure the speaker to the bracket using the designated screw from the bottom.
4. Hang Assembled Bracket: Align the assembled bracket (with speaker attached) with the wallplate mounted on the wall. Slide it down to securely engage the locking mechanism. Ensure the speaker and mount are stable before releasing.

Image: A WALI speaker wall mount holding a Sonos Era 100 speaker, installed on a wall next to a bed in a room, demonstrating its space-saving design.

Funcionament i ajustos

The WALI Speaker Wall Mount allows for precise positioning of your Sonos Era 100 speaker to optimize your listening experience.

Ajust giratori

The mount offers a swivel angle of ±45 degrees. Gently rotate the speaker and mount assembly to the desired left or right angle. Ensure the adjustment is smooth and the speaker remains stable.

Image: A diagram showing a Sonos Era 100 speaker on the mount, with arrows indicating a swivel range of +45 degrees to -45 degrees.

Ajust d'inclinació

The mount provides a tilt angle adjustment from 0 to -18 degrees. This allows you to direct sound downwards. Loosen the tilt adjustment screw (if applicable, refer to your specific mount design), adjust to the desired angle, and then securely tighten the screw to fix the position.

Image: A diagram showing a Sonos Era 100 speaker on the mount, with arrows indicating a tilt range from 0 degrees to -18 degrees, and a close-up of the tilt adjustment mechanism.

Gestió de cables

The mount features a design for clean cable management. Route your speaker's power cable along the mount arm and use the provided strap to secure it, maintaining a tidy appearance.

Image: A Sonos Era 100 speaker mounted on the wall, with its power cable neatly routed along the mount arm and secured with a strap, labeled 'Clean Cable Management'.

Manteniment

To maintain the appearance and functionality of your WALI Speaker Wall Mount:

• Neteja: Netegeu el suport amb un drap suau i sec. Eviteu productes de neteja abrasius o dissolvents que puguin danyar l'acabat.
• Comprovacions periòdiques: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que estiguin ben ajustats i segurs.

Resolució de problemes

Si teniu problemes durant o després de la instal·lació, consulteu les solucions habituals següents:

• La muntura se sent fluixa: Ensure all mounting screws are fully tightened into the wall and the speaker is securely attached to the bracket. Verify the wall type is appropriate for mounting.
• Speaker not fitting: Confirm that your speaker is a Sonos Era 100 model. This mount is specifically designed for this speaker.
• Difficulty adjusting: Check if any adjustment screws are overtightened. Loosen slightly, adjust, then re-tighten.

Especificacions

Image: A detailed diagram illustrating the dimensions of the WALI speaker wall mount, including height (6 inches), width (6.9 inches), and depth (4.5 inches).

Atenció al client

For any questions, assistance, or to report missing/damaged parts, please contact WALI customer support. Our experienced and friendly US-based customer support team is available to assist you 7 days a week.

Please refer to the product packaging or the WALI official weblloc web per obtenir informació de contacte específica.