Vente-unique WILDEN II Sliding Door Instruction Manual

1. Introducció

This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your Vente-unique WILDEN II sliding door. Please read these instructions carefully before beginning installation to ensure safe and correct usage. Keep this manual for future reference.

The WILDEN II sliding door features a black aluminum frame and 4mm tempered glass, designed for interior use. It includes a soft-close system and a reversible opening direction.

2. Informació de seguretat

• Always wear appropriate safety gear, including gloves and eye protection, during assembly and installation.
• Ensure the wall structure is capable of supporting the weight of the door and rail system (approximately 30.2 kg). Consult a professional if unsure.
• Mantingueu els nens i les mascotes allunyats de la zona de treball durant la instal·lació.
• Handle glass components with extreme care to prevent breakage and injury.
• Do not modify the product in any way, as this may compromise its safety and void the warranty.
• Ensure all fasteners are securely tightened before using the door.

3. Contingut del paquet

Verify that all components are present and undamaged before starting assembly.

• 1 x WILDEN II Sliding Door (Aluminum frame, 4mm tempered glass)
• 1 x LEZAMA Aluminum Sliding Door Rail (186 cm length)
• 1 x mànec
• Maquinari de muntatge (cargols, ancoratges, etc.)
• Guia inferior
• Soft-close mechanisms

4. Configuració i instal·lació

4.1 Eines necessàries (no incloses)

• Trepant
• Cinta mètrica
• Nivell
• Llapis
• Joc de tornavís
• Clau anglesa
• Guants i ulleres de seguretat

4.2 Passos previs a la instal·lació

1. Inspeccionar components: Unpack all parts and check for any damage or missing items.
2. Prepara la paret: Ensure the wall where the rail will be mounted is clean, dry, and structurally sound. Mark the desired height for the rail, ensuring it is level. The rail should be mounted at a height that allows the door to clear the floor by a few millimeters.

4.3 Instal·lació del carril

1. Marqueu els forats de perforació: Hold the 186 cm rail against the wall at the marked height. Use a level to ensure it is perfectly horizontal. Mark the positions for the mounting screws.
2. Forats: Drill pilot holes at the marked positions. Use appropriate drill bits and wall anchors for your wall type (e.g., concrete, drywall).
3. Mount Rail: Secure the rail to the wall using the provided screws. Ensure it is firmly attached and level.
4. Install Soft-Close Mechanisms: Attach the soft-close mechanisms to the rail according to the detailed diagrams in the manufacturer's specific assembly guide (not provided here, but typically included with the product).

4.4 Door Assembly and Hanging

1. Attach Rollers: Secure the roller hangers to the top edge of the door panel. Ensure they are aligned and tightened.
2. Mànec d'instal·lació: Attach the handle to the door panel at your preferred height and side. The door is reversible, allowing for left or right opening.
3. Porta penjada: Carefully lift the door and hook the rollers onto the rail. Ensure the door hangs freely and can slide along the rail.

4.5 Bottom Guide Installation

1. Guia de posició: Slide the door to its closed position. Place the bottom guide on the floor directly beneath the door, ensuring it aligns with the groove at the bottom of the door.
2. Mark and Secure: Mark the drill holes for the bottom guide. Drill pilot holes and secure the guide to the floor using appropriate screws.

Figure 1: Vente-unique WILDEN II Sliding Door with Rail System

Figure 2: Installed WILDEN II Sliding Door in a Living Room Setting

Figure 3: Detail of Top Rail and Rollers

Figure 4: Detail of Bottom Guide

Figure 5: Dimensional Drawing (Measurements in cm)

5. Instruccions de funcionament

To open or close the Vente-unique WILDEN II sliding door, gently push or pull the handle in the desired direction. The integrated soft-close system will engage near the end of the door's travel, ensuring a smooth and quiet closing action. The door can be installed to slide to the left or right, depending on your preference during assembly.

6. Manteniment

• Neteja del vidre: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Avoid harsh chemicals that could damage the glass or frame finish.
• Neteja del marc: Netegeu el marc d'alumini amb anuncisamp cloth and mild soap. Dry immediately with a clean cloth.
• Rail and Rollers: Periodically inspect the rail and rollers for any dust or debris. Clean with a dry cloth. If the door does not slide smoothly, a small amount of silicone-based lubricant can be applied to the rail, avoiding contact with the glass.
• Elements de fixació: Regularly check all screws and bolts to ensure they remain tight. Retighten if necessary.

7. Solució De Problemes

• La porta no llisca suaument: Check the rail for obstructions or debris. Ensure rollers are clean and properly seated. Apply lubricant if needed. Verify the rail is level.
• Door not closing completely: Inspect the soft-close mechanism for proper adjustment. Ensure the bottom guide is correctly aligned and not obstructed.
• Door making noise: Check for loose fasteners on the rollers, rail, or door panel. Clean and lubricate the rail and rollers.
• Door feels wobbly: Ensure all mounting screws for the rail and the bottom guide are securely tightened. Verify the wall structure is stable.

8. Especificacions

9. Garantia

The Vente-unique WILDEN II Sliding Door comes with a Garantia del fabricant de 2 anys. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for any warranty claims. The warranty does not cover damage resulting from improper installation, misuse, accidents, or unauthorized modifications.

10. Suport

If you encounter any issues during assembly or operation, or if you have questions not covered in this manual, please contact your retailer or Vente-unique customer service for assistance. Provide your product model (WILDEN II) and ASIN (B0D3M43LTS) when seeking support.