Manual d'usuari de l'inversor solar híbrid Anern de 4200 W

1. Introducció

This user manual provides essential information for the safe and efficient operation of your Anern 4200W Hybrid Solar Inverter. This pure sine wave inverter is designed for off-grid solar systems, converting 24V DC power to 220-230VAC. It integrates an inverter, a 120A MPPT solar charger, and a battery charger, offering comprehensive power support. The inverter is compatible with 24V lithium, lead-acid, and gel batteries, and can also operate without a battery.

2. Instruccions de seguretat

Si us plau, llegiu i comprengui totes les instruccions de seguretat abans de la instal·lació i el funcionament. Si no segueix aquestes instruccions, es poden produir descàrregues elèctriques, incendis o lesions greus.

• Ensure all wiring is performed by qualified personnel in accordance with local electrical codes.
• No intenteu desmuntar ni reparar l'inversor vosaltres mateixos. Demaneu ajuda a personal de servei qualificat.
• Mantingueu l'inversor allunyat de l'aigua, la humitat i els materials inflamables.
• Assegureu-vos una ventilació adequada al voltant de l'inversor per evitar el sobreescalfament.
• Important Note for US Users: This solar hybrid inverter is designed for 220V/230V AC output and does not support 110V/120V AC output directly. It also does not support parallel operation or split-phase operation in some parts of the US. For 110V/120V home appliances, a separate step-down converter (not included) is required.

3. Producte acabatview

The Anern 4200W Hybrid Solar Inverter is a versatile device designed to manage solar power, battery charging, and AC output for off-grid applications. It features a pure sine wave output, ensuring compatibility with sensitive electronics.

Figura 3.1: Frontal view of the Anern 4200W Hybrid Solar Inverter, showcasing its orange casing and central display.

Característiques principals:

• Sortida d'ona sinusoïdal pura: Provides clean and stable power suitable for all types of loads, including sensitive electronics.
• Controlador de càrrega MPPT integrat: Built-in 120A MPPT solar charge controller maximizes solar power harvesting.
• Múltiples modes de càrrega: Supports solar priority, utility priority, solar and utility only, and battery & solar charging modes.
• Múltiples modes de sortida: Offers solar priority, utility priority, and SBU (Solar-Battery-Utility) output modes.
• Compatibilitat de la bateria: Compatible with 24V Lithium, Lead-Acid, and Gel batteries.
• Funcionament sense bateria: Capable of operating without a connected battery.
• Protecció integral: Includes overload, over-temperature, short-circuit, overcurrent, low-voltage, overcharge, backfill, and overheat protection.
• Refrigeració intel·ligent: Features an intelligent variable speed fan for efficient heat dissipation and extended system life.
• Reinici automàtic: Automatically restarts when AC power is restored.
• Monitorització de Wi-Fi: Supports Wi-Fi module for remote monitoring via a mobile application.

Product Components and Display:

Figure 3.2: Detailed diagram of the inverter's components and display elements. Key parts include the LCD display, status indicators, function buttons, AC input/output, battery input, PV input, and communication ports.

1. Pantalla LCD
2. Visualització d'estat
3. Indicador de càrrega
4. Visualització d'errors
5. Botons de funció
6. Interruptor d'encesa/apagada
7. Entrada de CA
8. Sortida principal
9. Second edition (Secondary output)
10. Entrada de la bateria
11. Entrada fotovoltaica
12. Kit antipols
13. RS-232 communication connection / WiFi connection

Figure 3.3: The inverter features a primary AC output of 4200W and a secondary output of 1400W. The secondary output activates when mains current is absent and battery voltage is low, conserving energy.

Figure 3.4: The inverter incorporates multiple protection mechanisms including overcurrent, low-voltage, short-circuit, overheating, overload, overcharge, and backfill protection to ensure safe operation.

Figure 3.5: The inverter is compatible with GEL, FLD (Flooded), Li-on (Lithium-ion), and AGM battery types, offering flexibility for different energy storage solutions.

4. Instal·lació

Proper installation is crucial for the performance and safety of your hybrid solar inverter. Always consult a qualified electrician for installation to ensure compliance with all local and national electrical codes.

Wiring Diagram and Recommendations:

Figure 4.1: This diagram illustrates a typical wiring setup for the hybrid solar inverter, including connections for photovoltaic (PV) modules, batteries, AC input (utility/generator), and AC output to household loads.

• Connexió fotovoltaica: Màx. Circuit obert de la matriu fotovoltaica voltage: 450Vdc. Max. PV array power: 6500W. Suggested wire: 10 AWG/6mm². It is recommended to connect solar modules in series.
• Connexió de la bateria: For 48V lead-acid/lithium battery systems. Recommended wire size: 2 AWG Cable/25mm². Recommended Fuse: 150A.
• Entrada de CA: For 230VAC input. Maximum AC input voltage: 300VAC. Maximum AC charging current: 160A. Suggested cable: 10AWG/6mm². Recommended switch: 63A.
• Sortida de CA: For 220V/230V output. Rated output current: 44.3Amp. Suggested cable: 10AWG/6mm². Recommended switch: 63A.
• Important: The inverter's output is 230V. For 110V/120V appliances, a separate converter (not included) is required to step down the voltage.

5. Funcionament

The inverter offers flexible operation modes to suit various energy needs. The LCD display and function buttons allow for easy configuration and monitoring.

Modes de càrrega:

L'inversor admet quatre modes de càrrega:

• Prioritat solar: Solar power is the primary source for charging batteries and powering loads. Utility power is used only when solar power is insufficient.
• Prioritat d'utilitat: Utility power is the primary source for charging batteries and powering loads. Solar power is used only when utility power is unavailable.
• Solar and Utility Only: Both solar and utility power are used to charge batteries and power loads.
• Battery & Solar: Prioritizes battery power, supplemented by solar.

Modes de sortida:

The inverter provides three output modes:

• Prioritat solar: Loads are primarily powered by solar energy.
• Prioritat d'utilitat: Loads are primarily powered by utility (grid) power.
• Mode SBU (Bateria Solar-Utilitat): Loads are powered first by solar, then by battery, and finally by utility power as a last resort.

Monitorització de Wi-Fi:

The inverter can be monitored remotely using a Wi-Fi module (included) and a compatible mobile application. This allows users to view real-time data and adjust settings from their smartphone.

6. Manteniment

Un manteniment regular garanteix la longevitat i el rendiment òptim del vostre inversor.

• Mantingueu l'inversor net i lliure de pols. Feu servir un drap sec per netejar-lo.
• Assegureu-vos que hi hagi un flux d'aire adequat al voltant de la unitat. No bloquegeu les obertures de ventilació.
• Periodically check all connections for tightness and signs of corrosion.
• Monitor the LCD display for any error codes or warnings.
• The intelligent variable speed fan helps dissipate heat efficiently, contributing to the system's lifespan.

7. Solució De Problemes

This section provides guidance for common issues. For complex problems, contact customer support.

8. Especificacions

9. Garantia i Suport

Anern is committed to providing high-quality products and excellent customer service.

• Garantia: Our inverters offer a one-year maintenance service. If there is a problem with the components of the inverter, we will replace them for you.
• Suport tècnic: For any issues or technical inquiries, please contact Anern's professional after-sales team. You may be asked to provide pictures or videos of the malfunction to help diagnose the problem.
• Recursos en línia: Visita l'oficial Anern Store on Amazon per obtenir informació i suport addicionals sobre el producte.