1. Producte acabatview
The Midea I2A Robotic Vacuum Cleaner is designed for efficient and convenient floor cleaning. It features both vacuuming and mopping capabilities, a powerful BLDC motor, and intelligent navigation functions to maintain a clean home environment.
Image: Midea I2A Robotic Vacuum Cleaner and its remote control.
Característiques principals:
- Dry & Wet Dual Cleaning: Combines vacuuming and mopping for comprehensive floor cleaning.
- BLDC Motor: Provides strong, consistent suction power and extended lifespan.
- Anti-Fall Function: Sensors prevent the robot from falling off edges or stairs.
- Auto Return to Charging Dock: Automatically returns to its charging station when battery is low or cleaning is complete.
- 15 mm Climbing Ability: Navigates over minor obstacles and different floor surfaces.
- Extended Cleaning Sessions: Up to 110 minutes of continuous operation on a single charge.
- Facilitat d'ús: Simple setup and operation via remote control.
2. Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
Image: Contents of the Midea I2A Robotic Vacuum Cleaner package, including the robot, charging dock, batteries, remote, adapter, mopping holder, cleaning brush, side brushes, water tank, dustbin, instruction manual, and filter cotton.
- 1x Robot aspirador
- 1 moll de càrrega
- 2x bateria
- 1x comandament a distància
- 1x adaptador
- 1x Mopping Holder Assembly
- 1x raspall de neteja
- 2x Side Brush
- 1x Dipòsit d'aigua
- 1x Cubell d'escombraries
- 1 x manual d'instruccions
- 4x Filter Cotton
3. Guia de configuració
3.1 Col·locació de la base de càrrega
Place the charging dock against a wall in an open area, ensuring there are no obstacles within 1 meter (3 feet) to the sides and 2 meters (6 feet) in front of the dock. Connect the power adapter to the charging dock and plug it into a power outlet.
Image: Illustration of the robotic vacuum returning to its charging dock.
3.2 Càrrega inicial
Place the robot vacuum onto the charging dock. Ensure the charging contacts on the robot align with those on the dock. The indicator light on the robot will show charging status. For first-time use, charge the robot for at least 6 hours to ensure optimal battery performance.
3.3 Instal·lació dels raspalls laterals
Press the side brushes onto the square posts at the bottom of the robot until they click into place.
3.4 Installing Dustbin and Water Tank
Open the top cover of the robot. Insert the dustbin into its compartment until it is securely seated. For mopping, fill the water tank with clean water and attach the mopping pad to the mopping holder assembly. Then, insert the water tank assembly into the robot.
Image: Diagram showing the 200mL dustbin and 230mL electronic water tank components of the Midea I2A robot.
4. Instruccions de funcionament
4.1 Inici i aturada de la neteja
- Començar: Press the power button on the robot or the "AUTO" button on the remote control. The robot will begin cleaning in automatic mode.
- Per posar en pausa: Press the power button on the robot or the "Play/Pause" button on the remote control.
- Parar: Press and hold the power button on the robot for a few seconds, or press the "Power" button on the remote control to send it back to the charging dock.
Image: A hand holding the remote control, indicating simple operation of the robot vacuum.
4.2 modes de neteja
The Midea I2A operates with a random navigation pattern, ensuring comprehensive coverage over time. Use the remote control to select specific cleaning modes if available (e.g., Spot Cleaning, Edge Cleaning, Auto Cleaning).
4.3 Neteja en sec i en humit
For wet cleaning, ensure the water tank is filled and the mopping pad is attached. The robot will vacuum and then mop the floor. For dry cleaning only, remove the water tank assembly.
Image: Illustration of the robot vacuum's underside showing both vacuuming and mopping components.
4.4 Anti-Fall Function
The robot is equipped with sensors to detect drops and stairs. It will automatically change direction to avoid falling. Ensure these sensors are kept clean for optimal performance.
Image: Close-up of the robot vacuum's anti-fall sensor detecting an edge.
4.5 Obstacle Climbing
The Midea I2A can climb over obstacles up to 15 mm in height, allowing it to transition between different floor types and over small thresholds.
Image: The Midea I2A robot vacuum demonstrating its ability to climb over a 15mm obstacle and its slim 7.4cm height for cleaning under furniture.
5. Manteniment
Un manteniment regular garanteix un rendiment òptim i allarga la vida útil del teu aspirador robòtic.
5.1 Buidar el contenidor d'escombraries
Press the release button to remove the dustbin. Open the dustbin cover and empty its contents into a trash bin. Clean the dustbin with a dry cloth or rinse with water if necessary (ensure it is completely dry before re-inserting).
5.2 Neteja de filtres
Remove the filter from the dustbin. Tap the filter gently to remove dust. Do not wash the HEPA filter with water. Replace filters every 3-6 months depending on usage.
5.3 Neteja dels raspalls laterals
Periodically remove the side brushes and clean any tangled hair or debris. If brushes are worn, replace them with new ones.
5.4 Neteja del dipòsit d'aigua i de la fregona
After each mopping session, empty any remaining water from the tank. Rinse the water tank and mopping pad with clean water. Allow the mopping pad to air dry completely before reattaching or storing.
5.5 Neteja dels sensors
Wipe the anti-fall sensors and charging contacts on the robot and charging dock with a clean, dry cloth to ensure proper function.
6. Solució De Problemes
If you encounter issues with your Midea I2A, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| El robot no s'engega ni respon. | Low battery; Power switch off; Remote control batteries dead. | Charge the robot; Ensure power switch is ON; Replace remote control batteries. |
| El robot es queda encallat sovint. | Obstacles (cables, rugs); Sensors are dirty. | Clear the cleaning area of obstacles; Clean the anti-collision and anti-fall sensors. |
| Mal rendiment de neteja. | Dustbin full; Filters clogged; Brushes tangled or worn. | Empty dustbin; Clean/replace filters; Clean/replace side brushes. |
| Water mopping is ineffective or leaves streaks. | Water tank empty; Mopping pad dirty or improperly attached; Water outlet clogged. | Fill water tank; Clean/replace mopping pad; Check water outlet for blockages. |
| El robot no torna a la base de càrrega. | Charging dock obstructed; Robot too far from dock; Charging contacts dirty. | Ensure clear path to dock; Manually place robot on dock; Clean charging contacts. |
7. Especificacions
| Característica | Detall |
|---|---|
| Marca | Midea |
| Nom del model | MI2AINBK |
| Característiques especials | Anti-Fall, Auto-Docking, Cordless, Easy-Empty Dirt Container, Wet/Dry |
| Color | Negre |
| Dimensions del producte | 30L x 30W x 7.4H centímetres |
| Tipus de filtre | Tela |
| Durada de la bateria | 110 minuts |
| Voltage | 14.4 Volts |
| Capacitat de la paperera | 200 mil·lilitres |
| Capacitat del dipòsit d'aigua | 230 mil·lilitres |
| Font d'alimentació | Funciona amb bateria |
| Mètode de control | Remot |
| Factor de forma | Robòtica |
| Capacitat d'escalada | 15 mm |
| Pes de l'article | 2 kg 500 g |
| Recomanació de superfície | Tiles, Hard Floor, Wooden Flooring, Carpets |
8. Garantia i Suport
For warranty information, please refer to the warranty card included in your product packaging or contact Midea customer support. Keep your purchase receipt as proof of purchase.
For technical support or service inquiries, please visit the official Midea website or contact their customer service hotline. Contact details can typically be found in the included instruction manual or on the Midea brand store page:
