Introducció
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Feit Electric Wi-Fi Smart Dimmer Light Switch. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image: The product packaging for the Feit Electric Smart Dimmers, highlighting key features such as Wi-Fi connectivity, remote access, voice control, and scheduling. It also states the requirement for a neutral wire.
Configuració i instal·lació
Precaucions de seguretat
- Always turn off power at the circuit breaker before beginning any electrical work.
- Si teniu dubtes sobre alguna part del procés d'instal·lació, consulteu un electricista qualificat.
- Ensure your electrical box has a neutral wire. This dimmer switch requires a neutral wire for operation.
Identifying a Neutral Wire
Before installation, verify the presence of a neutral wire in your switch box. A neutral wire is typically white. If no neutral wire is present, this dimmer switch will not function.
Image: A diagram illustrating how to identify a neutral wire (white wire) within a standard electrical switch box. It shows the dimmer switch connected to line, load, ground, and neutral wires.
Instruccions de cablejat
The Feit Electric Smart Dimmer supports both single-pole and 3-way wiring configurations. Refer to the diagrams below for appropriate connections.
Image: Diagrams illustrating various wiring configurations for the smart dimmer, including single dimmer, two dimmers, switch and dimmer, and multiple dimmers, along with multi-gang installation examples.
- Apagueu l'alimentació a l'interruptor.
- Traieu la placa de paret existent i l'interruptor.
- Identify the Line, Load, Neutral, and Ground wires.
- Connect the wires from the Feit Electric Smart Dimmer to the corresponding wires in your electrical box using wire nuts.
- Carefully push the wires back into the electrical box and secure the dimmer switch with screws.
- Fixeu la nova placa de paret.
- Resta l'alimentació al disjuntor.
Emparellament Wi-Fi
After installation, pair your dimmer switch with the Feit Electric app for smart control. The switch operates on a 2.4GHz Wi-Fi network.
- Download the Feit Electric app from your device's app store.
- Creeu un compte o inicieu sessió.
- Follow the in-app instructions to add a new device. The power indicator light on the dimmer will blink during pairing mode.
Instruccions de funcionament
Control manual
Image: A detailed diagram of the Feit Electric Smart Dimmer switch, labeling the Power ON/OFF Switch, Dim (+) and Dim (-) buttons, Air Gap Switch, Light Level Indicator Lights, and Power Indicator Light.
- Interruptor d'encesa / apagat: Press the main button to turn lights on or off.
- Dim (+) / Brighten Lights: Press the upper side button to increase brightness. Hold for 2 seconds for stepless dimming.
- Dim (-) / Lower Lights: Press the lower side button to decrease brightness. Hold for 2 seconds for stepless dimming.
- Light Level Indicator Lights: Five LEDs indicate the selected brightness level (LED 1: 1%-20%, LED 2: 21%-40%, LED 3: 41%-60%, LED 4: 61%-80%, LED 5: 81%-100%).
- Llum indicador d'alimentació: Blinks during pairing mode (lasts three minutes). Solid light indicates the unit is paired or after 3 minutes if no Wi-Fi connection.
- Interruptor d'entrefer: Pull out the small tab at the bottom to completely cut power to the light fixture for bulb replacement or maintenance.
Funcions de control intel·ligent
Imatge: Un cop mésview of the smart features of the dimmer switch, including Remote Access, Voice Control (compatible with Alexa and Google Assistant), Scheduling & Timer, and Grouping, shown alongside the dimmer and a smartphone app interface.
- Accés remot: Control your lights from anywhere using the Feit Electric app.
- Control de veu: Compatible with Amazon Alexa and Google Assistant. Use voice commands to turn lights on/off or adjust brightness (e.g., "Alexa, dim the kitchen lights to 20%").
- Programació i temporitzador: Set schedules for your lights to turn on/off or dim at specific times.
- Agrupació: Group multiple Feit Electric smart devices together for simultaneous control.
Smooth Dimmability
Image: A visual representation of the smooth dimmability feature, showing five stages of light intensity from 1%-20% to 81%-100% brightness.
The dimmer provides smooth transitions across its dimming range, from 1% to 100% brightness. Ensure compatible dimmable LED bulbs are used for optimal performance.
Manteniment
The Feit Electric Smart Dimmer Light Switch requires minimal maintenance.
- Neteja: To clean the switch and wall plate, wipe with a soft, damp drap. No utilitzeu productes de neteja abrasius ni dissolvents. Assegureu-vos que l'alimentació estigui apagada abans de netejar.
- Compatibilitat amb bombetes: For best dimming performance and to prevent flickering, use only dimmable LED bulbs.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Dimmer not responding / No power | No neutral wire; Power off at breaker; Loose wiring. | Verify neutral wire presence. Check circuit breaker. Re-check wiring connections. |
| Lights flickering or buzzing | Non-dimmable bulbs; Incompatible dimmable bulbs; Overloaded circuit. | Ensure all bulbs are dimmable LEDs. Try different brand of dimmable LED bulbs. Check total wattage does not exceed dimmer's maximum rating. |
| Cannot connect to Wi-Fi / App issues | Incorrect Wi-Fi band (not 2.4GHz); Incorrect pairing procedure; Weak Wi-Fi signal. | Ensure your router is broadcasting a 2.4GHz network. Follow app pairing instructions carefully. Move closer to router or improve Wi-Fi signal. |
| 3-way/4-way wiring not working | Incorrect wiring for multi-way setup; Defective switch. | Review wiring diagrams for 3-way/4-way configurations. Ensure only one smart dimmer is on the line side for 3-way, or two smart dimmers for specific 3-way setups. Consult an electrician if issues persist. |
Especificacions
Image: A detailed specification sheet for the dimmer switch, including physical dimensions, setup requirements, compatible wiring types, gang installation options, voltage, i wat màximtage.
- Número de model: B0D4YFCTHV
- Marca: Feit Electric
- Product Dimensions (Switch): 4.6 in (H) x 2.8 in (W) x 1.7 in (D)
- Pes del producte: Approximately 1.3 Pounds (for 3-pack)
- Requisits de configuració: Neutral Wire, 2.4GHz Wi-Fi
- Compatible Wiring: Single Wiring, 3-WAY (1 smart dimmer on circuit), 3-WAY (2 smart dimmers on same circuit)
- Compatible Gang Installation: 1-Gang, 2-Gang, 3-Gang
- Voltage: 120 Volt, 60Hz, 15 Amp Màx
- Max Wattage: 450 Wattage (Incandescent/Halogen), 150 Watt Dimmable LED
- Mode de funcionament: Automàtic
- Tipus de contacte: Normalment obert
- Tipus de connector: Terminals de cargol
- Terminal: Cargol
- Tipus d'actuador: Palanca de frontissa
- Material de contacte: Llautó
- Classificació de protecció internacional: IP20
Informació de la garantia
Specific warranty details for the Feit Electric Wi-Fi Smart Dimmer Light Switch are typically provided with the product packaging or available on the official Feit Electric weblloc web. Consulteu aquests recursos per obtenir els termes i condicions de garantia més precisos i actualitzats.
Suport
Per a més ajuda, suport tècnic o per a view frequently asked questions, please visit the official Feit Electric weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. La informació de contacte normalment es pot trobar a l'embalatge del producte o al fabricant. weblloc.
