1. Introducció
This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Pipishell Full-Motion Long-Arm TV Wall Mount, model PILF18. This mount is designed to securely hold 32-75 inch televisions weighing up to 100 lbs, offering extensive flexibility with its 32.37-inch extension, swivel, tilt, and leveling capabilities. Please read this manual thoroughly before installation to ensure safe and correct usage.
Image: The Pipishell Full-Motion Long-Arm TV Wall Mount, showcasing its articulating arms, TV mounting plate, wall plate, and included accessories such as a bubble level and cable ties.
2. Informació de seguretat
Improper installation or use of this product can result in serious injury or damage. Please adhere to the following safety guidelines:
- No supereu la capacitat màxima de pes de 100 lliures (45.3 kg).
- Assegureu-vos que l'estructura de la paret pugui suportar amb seguretat el pes combinat del suport i del televisor.
- This mount is designed for installation on solid concrete, brick, or a single wood stud. NO el munteu sol sobre plaques de guix.
- Feu servir sempre un localitzador de muntants de fusta per localitzar-los amb precisió.
- Verify that the VESA mounting pattern of your TV is compatible with the mount (200x100mm to 600x400mm).
- Use all provided hardware. Do not substitute parts unless explicitly instructed.
- If you are unsure about any part of the installation process, seek assistance from a qualified professional.
- Mantingueu els nens i les mascotes allunyats de la zona d'instal·lació durant la configuració.
- Reviseu regularment totes les connexions i elements de fixació per assegurar-vos que es mantinguin segurs.
3. Contingut del paquet
Before beginning installation, verify that all components are present and undamaged. Refer to the parts list in your physical manual for specific quantities and identifiers. Typical contents include:
- Muntatge de la placa de paret
- Suports per a TV (2 unitats)
- Maquinari de muntatge (diversos cargols, volanderes, separadors per a TV i paret)
- Concrete Anchors (if applicable)
- Nivell de bombolla
- Brides de cable
- Plantilla d'instal·lació
4. Especificacions
| Característica | Descripció |
|---|---|
| Model | PILF18 |
| Compatibilitat de la mida del televisor | 32 - 75 polzades |
| Capacitat de pes | Fins a 100 lliures (45.3 kg) |
| Compatibilitat VESA | Mín: 200x100mm, Màx: 600x400mm |
| Tipus de muntatge | Full motion (Extend, Swivel, Tilt, Level, Articulating) |
| Extensió des de la paret | Fins a 32.37 polzades (82.2 cm) |
| Retracted Profile | 3.12 polzades (7.9 cm) |
| Gamma giratòria | +/- 90 graus |
| Interval d'inclinació | +5 degrees / -15 degrees (tool-free) |
| Ajust d'anivellament | +/- 4 degrees (post-installation) |
| Material | Acer d'aliatge |
| Compatibilitat de paret | Wood Stud (single), Solid Concrete, Brick (Do not mount on drywall alone) |
Image: Visual representation of the mount's wide compatibility, indicating support for 32-75 inch TVs, various VESA patterns (200x100mm to 600x400mm), and a maximum load of 100 lbs. It also shows compatibility with solid concrete, wood stud, and brick walls.
Image: Illustrates the range of TV sizes (32-75 inches) and the maximum weight capacity (100 lbs) that the mount can support.
Image: Details the compatible VESA mounting patterns, ranging from a minimum of 200x100mm to a maximum of 600x400mm, with a visual example of VESA hole placement on a TV back.
Image: Shows the three types of walls suitable for installation: wood stud, solid concrete, and brick. A warning explicitly states not to install on drywall alone.
5. Configuració i instal·lació
This section outlines the general steps for installing your Pipishell TV wall mount. For detailed, step-by-step instructions and specific hardware identification, please refer to the dedicated installation manual included with your product.
5.1 Llista de comprovació prèvia a la instal·lació
- Confirma que el pes i el patró VESA del televisor estiguin dins de les especificacions del suport.
- Identify your wall type (wood stud, concrete, or brick).
- Gather necessary tools (e.g., drill, stud finder, level, measuring tape, pencil, socket wrench).
- Assegureu-vos de tenir tot el contingut del paquet tal com s'indica a la secció 3.
5.2 Passos d'instal·lació anteriorsview
- Fixeu els suports de TV: Secure the two vertical TV brackets to the back of your television using the appropriate screws, washers, and spacers from the provided hardware kit. Ensure they are centered and level.
- Placa de paret de muntatge:
- Locate the desired mounting position on your wall. Use a stud finder to find a single wood stud if mounting on wood. For concrete or brick, mark the drill holes directly.
- Use the provided template to mark the drill holes for the wall plate.
- Drill pilot holes according to the manual's specifications for your wall type.
- Secure the wall plate to the wall using the appropriate lag bolts and washers. Ensure the wall plate is level using the included bubble level.
- Penjar la televisió: Carefully lift the television with the attached brackets and hook them onto the wall plate. Secure the TV to the mount using the safety screws or locking mechanisms as per the manual.
Image: A three-step visual guide illustrating the installation process: 1) Attaching the TV brackets to the television, 2) Mounting the wall plate to the wall, and 3) Hanging the TV onto the mounted wall plate.
6. Instruccions de funcionament
Once installed, your Pipishell Full-Motion TV Wall Mount offers various adjustments to optimize your viewexperiència.
6.1 Extensió i retracció
Gently pull or push the television to extend it up to 32.37 inches from the wall or retract it to a low profile of 3.12 inches. Ensure smooth, controlled movements.
6.2 Ajustament del gir
The mount allows for a +/- 90-degree swivel. Carefully pivot the television left or right to achieve your desired viewangle d'inclinació des de diferents posicions de l'habitació.
6.3 Ajust d'inclinació
Adjust the vertical tilt of your TV from +5 degrees (upward) to -15 degrees (downward) to reduce glare or optimize viewing from various heights. This adjustment is tool-free; typically, you can loosen knobs on the TV brackets, adjust the angle, and then tighten them.
6.4 Anivellament posterior a la instal·lació
If your TV appears slightly unlevel after installation, the mount allows for a +/- 4-degree leveling adjustment. Consult your specific manual for the mechanism to perform this fine-tuning, which usually involves adjusting screws on the TV brackets.
Image: Illustrates the mount's full range of motion, including +/- 90-degree swivel, extension up to 32.37 inches, retraction to 3.12 inches, and tool-free tilt from +5 to -15 degrees.
Image: Demonstrates the post-installation leveling feature, allowing for a fine adjustment of +/- 4 degrees to ensure the TV is perfectly horizontal.
7. Manteniment
Un manteniment regular ajuda a garantir la longevitat i el funcionament segur del suport de paret per a televisors.
- Neteja: Netegeu el suport amb un drap suau i sec. Eviteu productes de neteja abrasius o dissolvents que puguin danyar l'acabat.
- Comprovació de fixació: Periodically (e.g., every 6 months) check all screws and bolts, especially those securing the mount to the wall and the TV to the mount, to ensure they remain tight. Do not overtighten.
- Comprovació de moviment: Occasionally move the mount through its full range of motion (extension, swivel, tilt) to ensure smooth operation. If any stiffness or unusual noise is noted, inspect the pivot points.
8. Solució De Problemes
Aquesta secció tracta problemes comuns que podeu trobar.
| Problema | Causa possible | Solució |
|---|---|---|
| El televisor no està anivellat després de la instal·lació. | Initial installation was slightly off, or settling has occurred. | Use the post-installation leveling feature (+/- 4 degrees) to adjust the TV. Refer to Section 6.4 or your detailed manual for specific instructions. |
| Mount feels stiff or difficult to move. | Joints may need lubrication or fasteners are too tight. | Check for any overtightened bolts at the articulating joints. Apply a small amount of silicone-based lubricant to the pivot points if necessary (avoid petroleum-based lubricants). |
| TV appears to be sagging or unstable. | Mounting hardware is loose, or weight capacity is exceeded. | Immediately remove the TV from the mount. Re-check all wall and TV fasteners for tightness. Verify that your TV's weight does not exceed 100 lbs. If the issue persists, contact support. |
| Peces que falten o components danyats. | Error d'embalatge o danys per enviament. | Do not proceed with installation. Contact Pipishell customer support immediately for replacement parts. |
9. Garantia i atenció al client
Pipishell stands behind the quality of its products. For specific warranty details, please refer to the warranty card included with your product or visit the official Pipishell weblloc.
If you have any questions regarding installation, product selection, or require technical assistance, please contact our U.S.-based product support team:
- Correu electrònic: support@pipishell.com
- Botiga de marca: Pipishell Amazon Store
Please have your model number (PILF18) and purchase information ready when contacting support.
