1. Producte acabatview
The VIVOTEK FD9383-HTV is a high-performance 5-megapixel outdoor network dome camera designed for robust surveillance applications. It features a 2.8-12mm motorized varifocal lens, providing flexibility in field of view, and integrated IR LEDs for clear night vision up to 98 feet. This camera is built to withstand harsh outdoor conditions with IP66 and IK10 ratings, ensuring protection against dust, water, and vandalism. It also includes a built-in microphone for audio monitoring.
Imatge 1.1: Frontal view of the VIVOTEK FD9383-HTV 5MP Outdoor Network Dome Camera.
Característiques principals:
- 2560 x 1920 Resolution at 30 fps for high-quality video.
- IR LEDs for Night Vision up to 98 feet (30 meters).
- 2.8-12mm Motorized Varifocal Lens for flexible viewangles d'ajust.
- 95.4 to 28.7° Horizontal Angle of View.
- Built-In Microphone for audio capture.
- IP66-Rated for outdoor use, protecting against dust and water.
- IK10-Rated for vandal resistance.
- Supports microSD Cards up to 1TB for local storage.
- RJ45 Ethernet with Power over Ethernet (PoE) Technology.
- Complies with ONVIF Profiles G, S, T for broad compatibility.
2. Contingut del paquet
Verify that all items are present and in good condition. If any items are missing or damaged, contact your vendor immediately.
- VIVOTEK FD9383-HTV Network Dome Camera
- Mounting Screw Kit (screws, wall anchors)
- Kit de connectors impermeables
- Alignment Sticker/Drill Template
- Guia d'instal·lació ràpida
- CD de programari (o informació de l'enllaç de descàrrega)
3. Informació de seguretat
Please read these safety instructions carefully before operating the device to prevent injury to yourself or others and to avoid damage to the device. Keep this manual for future reference.
- Instal·lació: Installation should be performed by qualified personnel only and must comply with all local codes.
- Font d'alimentació: Use only the specified power source (PoE or 12V DC adapter, if applicable) to avoid fire or electric shock.
- Medi ambient: Do not expose the camera to extreme temperatures, humidity, or corrosive environments beyond its specified operating conditions.
- Neteja: Desconnecteu l'alimentació abans de netejar. Feu servir un drap suau i sec. No utilitzeu netejadors líquids ni en aerosol.
- Manteniment: No intenteu atendre aquest producte vosaltres mateixos. Consulteu tots els serveis a personal de servei qualificat.
4. Configuració
4.1 Instal·lació física
The FD9383-HTV camera is designed for wall or ceiling mounting. Ensure the mounting surface is strong enough to support the camera's weight.
- Prepareu la superfície de muntatge: Use the provided drill template to mark the screw holes on the desired mounting location.
- Forats: Drill pilot holes for the mounting screws and, if necessary, for the network cable. Insert wall anchors if mounting on drywall or masonry.
- Col·loqueu el suport de muntatge: Fixeu el suport de muntatge de la càmera a la superfície amb els cargols proporcionats.
- Connectar els cables: Route the Ethernet cable through the mounting surface or cable entry point. Connect the RJ45 connector to the camera's network port. If not using PoE, connect a 12V DC power adapter (sold separately) to the power input. Ensure waterproof connections for outdoor installations.
- Secure Camera Body: Attach the camera body to the mounting bracket. Adjust the camera's orientation and angle as needed.
- Finalitzar la instal·lació: Secure all covers and ensure the camera is firmly mounted and protected from the elements.
Image 4.1: Illustrative diagram of camera mounting and cable connection.
4.2 Connexió de xarxa
The camera supports Power over Ethernet (PoE) for simplified installation, allowing both power and data to be transmitted over a single Ethernet cable.
- Connect the camera to a PoE-enabled switch or a PoE injector using a standard Ethernet cable.
- Alternatively, connect to a standard network switch and use a separate 12V DC power adapter.
- Ensure your network is configured to assign an IP address to the camera (DHCP recommended for initial setup).
4.3 Configuració inicial
After physical installation and network connection, you need to access the camera's web interface for initial configuration.
- Descobreix la càmera: Use VIVOTEK's IP Search utility (available on their website) or a network scanner to find the camera's IP address on your network.
- Accés Web Interfície: Obre a web browser (e.g., Chrome, Firefox) and enter the camera's IP address in the address bar.
- Inici de sessió: The default username is typically 'root' and the password is 'pass'. You will be prompted to change the password upon first login for security reasons.
- Configuració bàsica: Configure essential settings such as date/time, network settings (if not using DHCP), and user accounts.
5. Funcionament
5.1 Accessing the Camera Interface
Once configured, you can access the camera's live view and settings through its web interface or compatible VIVOTEK software/NVR systems.
- Enter the camera's IP address in your web navegador.
- Log in with your configured username and password.
- The interface provides access to live video, recording settings, motion detection, and other advanced features.
5.2 Adjusting Lens and Focus
The FD9383-HTV features a motorized varifocal lens, allowing remote adjustment of zoom and focus.
- Navigate to the 'Video' or 'Lens' settings section in the web interfície.
- Use the zoom controls to adjust the focal length (2.8mm to 12mm) to achieve the desired field of view.
- Utilize the focus controls to sharpen the image. Many VIVOTEK cameras offer a one-touch focus feature for automatic adjustment.
5.3 Night Vision Settings
The camera automatically switches to night vision mode in low-light conditions using its IR LEDs.
- In the 'Image' or 'IR' settings, you can configure the IR illuminator's behavior (e.g., auto, manual on/off).
- Adjust IR intensity if available, to prevent overexposure or underexposure in specific scenarios.
5.4 Enregistrament i emmagatzematge
The camera supports various recording methods, including local storage on a microSD card and network video recording (NVR).
- Targeta MicroSD: Insert a compatible microSD card (up to 1TB) into the camera's slot. Format the card via the web interface. Configure recording schedules and triggers (e.g., continuous, motion-triggered).
- NVR/NAS: Connect the camera to a VIVOTEK NVR or a compatible Network Attached Storage (NAS) device. Configure recording settings on the NVR/NAS.
5.5 Detecció de moviment
Configure motion detection to trigger recordings, send alerts, or activate other actions.
- Access the 'Event' or 'Motion Detection' settings in the web interfície.
- Define detection zones within the camera's field of view.
- Ajusteu els nivells de sensibilitat per minimitzar les falses alarmes.
- Set up actions to be taken when motion is detected (e.g., record video, send email notification).
6. Manteniment
6.1 Neteja
Una neteja regular ajuda a mantenir una qualitat d'imatge òptima i allarga la vida útil de la càmera.
- Lent: Gently wipe the lens with a soft, lint-free cloth. For stubborn dirt, use a lens cleaning solution specifically designed for optical surfaces. Avoid abrasive materials.
- Habitatge: Netegeu la carcassa de la càmera amb anuncisamp tela. No utilitzeu detergents o dissolvents forts.
- Dome Cover: If applicable, carefully clean the dome cover to ensure clear visibility.
6.2 actualitzacions de microprogramari
Periodically check the VIVOTEK website for firmware updates. Firmware updates often include bug fixes, performance improvements, and new features.
- Download the latest firmware for your FD9383-HTV model from the official VIVOTEK support page.
- Accedir a la càmera web interface and navigate to the 'System' or 'Maintenance' section.
- Follow the on-screen instructions to upload and install the firmware. Do not power off the camera during the update process.
7. Solució De Problemes
This section provides solutions to common issues you might encounter with your VIVOTEK FD9383-HTV camera.
| Problema | Causa possible | Solució |
|---|---|---|
| La càmera no s'encén | No power from PoE switch/injector; faulty power adapter; loose cable connection. | Check PoE status on switch; verify power adapter functionality; ensure all cables are securely connected. |
| No es pot accedir a la càmera a través de la xarxa | Incorrect IP address; network cable issue; firewall blocking access; camera not receiving an IP address. | Verify IP address; check network cable integrity; temporarily disable firewall; use IP Search utility to find camera. |
| Mala qualitat d'imatge (borrosa, fosca) | Lens out of focus; dirty lens/dome; insufficient lighting; incorrect image settings. | Adjust focus via web interface; clean lens/dome; check IR settings; reset image settings to default. |
| La detecció de moviment no funciona | Detection zones not configured; sensitivity too low; event actions not set up. | Configure detection zones; increase sensitivity; ensure event actions (e.g., record, notify) are enabled. |
| La targeta microSD no grava | Card not formatted; card full; recording schedule not active; faulty card. | Format microSD card in camera settings; check recording schedule; replace card if faulty. |
8. Especificacions
Detailed technical specifications for the VIVOTEK FD9383-HTV camera.
| Característica | Especificació |
|---|---|
| Sensor d'imatge | 1/2.8" Type CMOS |
| Resolució | 2560 x 1920 a 30 fps |
| Distància focal | 2.8 to 12mm Motorized Varifocal Lens |
| Angle horitzontal de View | 95.4 a 28.7° |
| Visió nocturna | IR LEDs up to 98 feet (30 meters) |
| Àudio | Micròfon incorporat |
| Emmagatzematge | Supports microSD Cards up to 1TB |
| Interfície de xarxa | 1x RJ45 Input (PoE) |
| Valoració ambiental | IP66 (resistent a la pols i a l'aigua) |
| Resistència vàndal | IK10-Rated |
| ONVIF Compliance | Profiles G, S, T |
| Dimensions del producte | 5.3 x 4.1 x 4.1 polzades (13.5 x 10.4 x 10.4 cm) |
| Pes de l'article | 1.9 lliures (0.86 kg) |
9. Garantia i Suport
VIVOTEK products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official VIVOTEK weblloc.
For technical support, product documentation, and software downloads, please visit the VIVOTEK official support portal:
https://www.vivotek.com/support
When contacting support, please have your camera's model number (FD9383-HTV) and serial number ready.
