Vente-unique Massimo Storage Bed 180x200 cm - Instruction Manual

Introducció

Thank you for choosing the Vente-unique Massimo Storage Bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Informació de seguretat

• Llegeix totes les instruccions: Assegureu-vos d'entendre tots els passos de muntatge i els avisos de seguretat abans de continuar.
• Assemblea de dues persones: Assembly of this bed requires at least two adults to prevent injury and ensure proper construction.
• Mantingueu allunyats els nens i les mascotes: During assembly, keep small children and pets away from the work area to avoid accidents with small parts or tools.
• Utilitzeu les eines correctes: Only use the tools specified in the assembly instructions.
• Comproveu totes les connexions: Reviseu periòdicament tots els cargols i perns per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
• Límit de pes: Do not exceed the maximum recommended weight of 120 kg for this bed.
• Storage mechanism: Exercise caution when opening and closing the storage mechanism. Keep hands and fingers clear of moving parts. Do not allow children to operate the mechanism unsupervised.

Contingut del paquet

Abans de començar el muntatge, verifiqueu que totes les peces que s'enumeren a continuació siguin presents i no estiguin danyades. Si hi ha alguna peça que falti o estigui danyada, no continueu amb el muntatge. Poseu-vos en contacte amb el servei d'atenció al client per obtenir ajuda.

• Capçalera (1)
• Baranes laterals (2)
• Peu de peu (1)
• Storage Frame/Mechanism (1 set)
• Slats (multiple pieces)
• Biga de suport central (1)
• Hardware Pack (screws, bolts, washers, Allen key)
• Instruccions de muntatge (aquest manual)

Muntatge i muntatge

Please follow these steps carefully. It is recommended to assemble the bed in the room where it will be used.

1. Prepara la zona: Deixeu una zona espaiosa per al muntatge. Col·loqueu tots els components sobre una superfície suau i neta per evitar ratllades.
2. Fixeu els rails laterals al capçal: Connect the side rails to the headboard using the provided bolts and washers. Do not fully tighten yet.
3. Fixeu els rails laterals al peu del peu: Connect the other end of the side rails to the footboard. Ensure all connections are aligned before gently tightening all bolts.
4. Instal·lació de la biga de suport central: Place the center support beam into its designated slots or brackets along the side rails. Secure with screws if required.
5. Assemble Storage Mechanism: Follow the specific instructions provided with the storage frame mechanism. This typically involves attaching the lifting arms to the bed frame and the slat frame. Ensure all hydraulic components are correctly installed and secured.
6. Instal·lar llistons: Place the bed slats onto the support frame. Depending on the design, they may snap into place or require screws. Ensure they are evenly spaced and secure.
7. Ajustament final: Once all components are in place and aligned, fully tighten all bolts and screws using the provided Allen key or appropriate tool. Do not overtighten.
8. Comprovar l'estabilitat: Gently shake the assembled bed to ensure it is stable and all connections are secure.

Operating Instructions (Storage Function)

The Massimo Storage Bed features a convenient lift-up mechanism to access under-bed storage. Always operate the mechanism with care.

1. Per obrir:
   • Remove any heavy items from the mattress surface that might impede lifting.
   • Poseu-vos drets als peus del llit.
   • Firmly grasp the lifting handle or the edge of the bed frame.
   • Lift the mattress and slat frame upwards. The hydraulic pistons will assist in lifting and holding the bed in the open position.
   • Ensure the bed is fully open and stable before placing or retrieving items from the storage compartment.
2. Tancar:
   • Ensure no items are obstructing the closing mechanism or protruding from the storage area.
   • Grasp the lifting handle or the edge of the bed frame.
   • Gently pull the mattress and slat frame downwards, guiding it back into the closed position. The hydraulic pistons will provide resistance for a controlled descent.
   • Ensure the bed is fully closed and latched (if applicable) before use.

Manteniment

• Neteja de la tapisseria:
  • Regularly vacuum the fabric upholstery using a soft brush attachment to remove dust and debris.
  • En cas de vessaments, eixugueu immediatament amb un drap net i sec. No fregueu.
  • For stubborn stains, use a mild fabric cleaner specifically designed for polyester, testing on an inconspicuous area first. Follow the cleaner's instructions carefully.
  • Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the fabric.
• Cura del marc:
  • Netegeu el marc del llit amb un drap suauamp cloth. Dry immediately with a clean cloth.
  • Periodically check all bolts and screws and tighten them if necessary to maintain stability.
• Mecanisme d'emmagatzematge:
  • Inspect the hydraulic pistons and moving parts occasionally for any signs of wear or damage.
  • Do not apply lubricants to the hydraulic pistons unless specifically instructed by the manufacturer.

Resolució de problemes

Especificacions

• Model: Massimo
• Dimensions: 180 x 200 cm (King Size)
• Material: Polyester fabric upholstery
• Color: Gris
• Pes aproximat de l'article: 119 quilos
• Maximum Recommended Weight: 120 quilos
• Muntatge requerit: Sí
• Franja d'edat: Adult

Garantia i Suport

For warranty information, replacement parts, or technical support, please refer to your purchase documentation or contact Vente-unique customer service. Keep your proof of purchase handy when contacting support.

Vente-unique Customer Service: Visit Vente-unique Contact Page