Informació important de seguretat
For the safety of your child, please read and understand all instructions before assembly and operation. Keep this manual for future reference.
- Always supervise children when operating the ATV.
- Assegureu-vos que el nen porti l'equip de seguretat adequat, inclòs un casc.
- Operate the ATV on flat, dry surfaces. Avoid slopes, uneven terrain, and public roads.
- Keep the car away from water to prevent electrical damage and ensure safety.
- No supereu la capacitat màxima de pes de 55 lliures.
- Recommended age for use: 3 - 8 years.
Contingut del paquet
Please check the contents of the box to ensure all parts are present:
- 1 x 6V Kids ATV
- 1 x Carregador
- 1 x Manual d'usuari
Instruccions de muntatge
Follow these steps to assemble your Hetoy 6V Kids ATV. Refer to the assembly video for visual guidance.
Guia de vídeo de muntatge
Official assembly video for the 6V Ride on ATV. This video demonstrates the step-by-step process of putting the ATV together, including wheel installation, handlebar attachment, and battery connection.
Muntatge pas a pas
- 1. Unboxing i preparació:
Carefully open the packaging and remove all components. Lay out all parts and ensure nothing is missing before beginning assembly.
The Hetoy 6V Kids ATV, ready for assembly. This image shows the main product unit.
- 2. Remove Steering Rod:
Locate the steering rod assembly. Using a screwdriver, carefully remove the securing components to detach the rod from the main body. This step is crucial for accessing the wheel attachment points.
- 3. Attach Front Wheels:
Place the ATV upside down or on its side for easier access. Slide the front wheels onto their respective axles. Secure each wheel with the provided washers and nuts. Ensure they are firmly attached but can still rotate freely.
This image illustrates the battery, speed, and motor specifications, which are relevant for understanding the vehicle's components during assembly.
- 4. Attach Rear Wheels:
Repeat the process for the rear wheels. Slide them onto the rear axle and secure them with the washers and nuts. Double-check that all four wheels are securely fastened.
- 5. Install Handlebars:
Re-insert the steering rod into its designated slot on the main body. Attach the handlebars to the top of the steering rod, ensuring they are aligned correctly. Secure the handlebars with the provided fasteners.
Un detallat view of the ATV's control panel, showing the foot pedal, music switch, forward/reverse switch, and power switch. This helps in understanding the final setup.
- 6. Connecteu la bateria:
Locate the battery compartment, usually under the seat. Connect the battery terminals according to the color-coded wires (red to red, black to black). Ensure a secure connection.
- 7. Secure Seat:
Once the battery is connected, place the seat back onto the ATV and secure it in place. Some models may have clips or screws to hold the seat firmly.
Instruccions de funcionament
Operating the Hetoy 6V Kids ATV is straightforward:
- Encès/apagat: Locate the red power switch on the dashboard. Press it to turn the ATV on or off. The headlight will illuminate when the power is on.
- Endavant/marrere: Use the forward/stop/reverse switch to select the desired direction of travel.
- Acceleració: Press the foot pedal to accelerate. Release the foot pedal to stop the ATV. The maximum speed is approximately 1.8 MPH.
- Funció musical: Press the music switch to play pre-installed songs.
A child enjoying a ride on the Hetoy 6V Kids ATV, demonstrating its use in an outdoor setting.
Instruccions de càrrega
To charge the 6V battery:
- Ensure the ATV is turned off.
- Locate the charging port, typically found near the rear wheel or under the seat.
- Connecteu el carregador al port de càrrega.
- Connecteu el carregador a una presa de corrent estàndard.
- Allow the battery to charge for the recommended time (refer to charger indicator for full charge). Do not overcharge.
- Desendolla el carregador un cop finalitzada la càrrega.
This image shows the types of surfaces the ATV is suitable for, which is important for safe operation and battery life.
Manteniment
Regular maintenance helps prolong the life of your ATV:
- Neteja: Wipe down the ATV with a damp drap. No utilitzeu productes químics agressius ni netejadors abrasius. Eviteu ruixar aigua directament sobre els components elèctrics.
- Cura de la bateria: Charge the battery fully after each use. If storing for an extended period, charge the battery at least once a month to maintain its health.
- Emmagatzematge: Store the ATV in a dry, cool place away from direct sunlight and moisture.
- Inspeccions: Periodically check all nuts, bolts, and electrical connections to ensure they are secure.
Resolució de problemes
Si teniu problemes, proveu aquestes solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| ATV does not move | Battery not charged or connected; Power switch off; Loose wiring. | Charge battery; Turn on power switch; Check battery connections. |
| Velocitat lenta | Low battery; Overloaded; Operating on unsuitable surface. | Charge battery; Reduce load; Move to a flat, hard surface. |
| Els llums no funcionen | Loose wire; Damaged bulb (if applicable). | Check wiring connections; Contact customer support if issue persists. |
Especificacions
- Dimensions del producte: 27.56 x 16.53 x 17.72 polzades (L x A x A)
- Pes de l'article: 55 lliures
- Número de model de l'article: cWMa0ChQ-vqMrqQvxT558wWqXO8Q
- Edat recomanada pel fabricant: 3 - 8 anys
- Velocitat màxima: 1.8 MPH
- Capacitat màxima de pes: 55 lliures
- Bateria: 6V4.5AH x 1
- Motor: 25W x 1
- Fabricant: Hetoy
- Data de llançament: 13 de juny de 2024
Diagram illustrating the product dimensions of the Hetoy 6V Kids ATV.
Garantia i Suport
For warranty information or technical support, please contact Hetoy customer service. Keep your purchase receipt as proof of purchase.
La informació de contacte normalment es pot trobar a l'embalatge del producte o a la fitxa oficial del fabricant. weblloc.
