Introducció
This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your MIPRO ACT-32H UHF Handheld Transmitter. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.
The MIPRO ACT-32H UHF Handheld Transmitter is designed for professional audio applications, offering reliable wireless performance and high-fidelity sound reproduction. Its robust construction and advanced features make it suitable for singers, presenters, and audio/video professionals.
Producte acabatview
The ACT-32H handheld transmitter features a durable housing, an integrated microphone capsule, and controls for power and frequency selection.
Figure 1: MIPRO ACT-32H UHF Handheld Transmitter. This image shows the black handheld microphone with a silver mesh grille at the top, a small display screen, and a power switch on the body. A blue band is visible near the bottom of the handle.
Components clau:
- Reixa del micròfon: Protects the microphone capsule and helps shape the sound.
- Càpsula: High-quality condenser capsule for clear audio capture.
- Pantalla LCD: Shows frequency, battery status, and other operational information.
- Interruptor d'encesa/silenciament: Controls power on/off and mutes the microphone output.
- Compartiment de la bateria: Conté les bateries necessàries per al funcionament.
- Antena: Integrated antenna for wireless signal transmission.
Què hi ha a la caixa
Upon opening the package, please verify that all listed items are present and in good condition:
- MIPRO ACT-32H UHF Handheld Transmitter (Microphone)
- Manual d'usuari (aquest document)
- (Note: Batteries may or may not be included depending on the specific package. Please check packaging for details.)
Configuració
1. Instal·lació de la bateria:
- Unscrew the bottom cap of the handheld transmitter to access the battery compartment.
- Insert two fresh AA alkaline batteries, observing the correct polarity (+/-) as indicated inside the compartment.
- Securely screw the bottom cap back onto the transmitter.
2. Pairing with Receiver:
The ACT-32H transmitter must be paired with a compatible MIPRO wireless receiver (sold separately) to function. Refer to your receiver's user manual for specific pairing instructions. Generally, the process involves:
- Powering on both the transmitter and the receiver.
- Initiating the ACT (Automatic Channel Targeting) sync function on the receiver.
- Aligning the IR (Infrared) ports of the transmitter and receiver for data transfer.
- Confirming successful pairing on both devices' displays.
Important: Ensure the transmitter and receiver are set to the same frequency band (e.g., 904-925 MHz for this model) to avoid compatibility issues.
Funcionament
Encès/apagat:
- To power on, slide the power switch to the "ON" position. The LCD display will illuminate.
- Per apagar-lo, feu lliscar l'interruptor d'alimentació a la posició "OFF".
Funció de silenci:
- While powered on, briefly slide the power switch to the "MUTE" position and release to mute the microphone. The LCD display may indicate "MUTE".
- Repeat the action to unmute the microphone.
Supervisió de l'estat de la bateria:
The LCD display on the transmitter will show the current battery level. Replace batteries promptly when the low battery indicator appears to avoid interruption during use.
Ús òptim:
- Hold the microphone approximately 2-6 inches from your mouth for best vocal pickup.
- Avoid covering the antenna area (typically at the bottom of the microphone) with your hand, as this can reduce wireless range and signal quality.
- Maintain a clear line of sight between the transmitter and the receiver whenever possible.
Manteniment
- Neteja: Use a soft, dry cloth to clean the exterior of the transmitter. Do not use liquid cleaners or solvents.
- Cura de la bateria: Traieu les piles si no heu d'utilitzar el transmissor durant un període prolongat per evitar fuites i danys.
- Emmagatzematge: Guardeu el transmissor en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Manipulació: While robust, avoid dropping or subjecting the transmitter to severe impacts.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha so del micròfon |
|
|
| Intermittent signal or static |
|
|
| Mala qualitat del so |
|
|
Especificacions
| Característica | Detall |
|---|---|
| Model | ACT-32H |
| Marca | MIPRO |
| Resposta de freqüència | 904-925 MHz (UHF) |
| Factor de forma del micròfon | Portàtil |
| Patró polar | Unidireccional |
| Font d'alimentació | Alimentat per piles (AA) |
| Pes de l'article | 4 lliures |
| Característiques especials | Sense fil, lleuger |
| Dispositius compatibles | Sistema PA |
Garantia i Suport
MIPRO products are designed for durability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official MIPRO weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact MIPRO customer support or your authorized dealer. Contact information can typically be found on the manufacturer's weblloc.
Nota: És possible que els plans de protecció es puguin comprar per separat a proveïdors externs. Aquests plans són diferents de la garantia del fabricant.
