Introducció
The MIPRO ACT-312/ACT-32T2 Dual-Channel Bodypack Wireless System is designed for professional audio applications, providing crystal-clear sound transmission for singers, presenters, and performers. This system features a dual-channel UHF receiver (ACT-312) and two bodypack transmitters (ACT-32T2), allowing simultaneous operation of two microphones. Key features include MIPRO's Automatic Channel Targeting (ACT) technology for streamlined synchronization, AutoScan for interference-free frequency selection, and diversity technology to minimize signal dropouts.
Image: The MIPRO ACT-312 Dual-Channel Receiver is shown at the bottom, a black rectangular unit with a green digital display and control knobs. Two MIPRO ACT-32T2 Bodypack Transmitters are positioned above the receiver, each with a green display and an antenna. The entire system is black, indicating its professional design.
Configuració
Proper setup ensures optimal performance and reliable wireless operation.
- Desembalatge i inspecció: Carefully unpack all components. Verify that the package contains the ACT-312 receiver, two ACT-32T2 bodypack transmitters, antennas, power adapter, and any included accessories. Inspect for any visible damage.
- Col·locació del receptor: Place the ACT-312 receiver on a stable, flat surface, away from large metal objects or other wireless devices that may cause interference. Ensure adequate ventilation around the unit.
- Connexió d'antena: Screw the provided antennas firmly onto the antenna connectors on the rear of the ACT-312 receiver. Position them vertically for best reception.
- Connexió d'alimentació: Connect the supplied power adapter to the DC input on the rear of the ACT-312 receiver, then plug it into a suitable AC power outlet.
- Connexió de sortida d'àudio: Connect the audio output of the ACT-312 receiver to your mixer, amplifier, or audio interface using appropriate XLR or 1/4" cables (not included).
- Instal·lació de la bateria del transmissor: Open the battery compartment on each ACT-32T2 bodypack transmitter and insert two fresh AA batteries, observing polarity.
- Microphone Connection (Transmitter): Connect your lavalier or headset microphone (compatible with MIPRO's mini-XLR connector) to the input jack on the ACT-32T2 bodypack transmitter.
Instruccions de funcionament
Follow these steps for effective operation of your wireless system.
- Encès:
- Turn on the ACT-312 receiver using the power button on the front panel. The display will illuminate.
- Turn on each ACT-32T2 bodypack transmitter by pressing and holding its power button.
- Frequency Scan (AutoScan):
- On the ACT-312 receiver, press the "Scan" button. The receiver will automatically scan for the clearest available frequencies in your environment.
- Once a clear frequency is found, the receiver will display it.
- Transmitter-Receiver Synchronization (ACT):
- With the receiver displaying the desired frequency, align the IR port on the ACT-32T2 bodypack transmitter with the IR port on the ACT-312 receiver (usually located on the front panel).
- Press the "ACT" button on the receiver. The frequency information will be automatically transferred to the transmitter. The transmitter's display should now match the receiver's frequency. Repeat for the second transmitter.
- Ajust de guany:
- Adjust the gain (input sensitivity) on each ACT-32T2 bodypack transmitter to prevent distortion. Start with a lower setting and gradually increase it while speaking or singing into the microphone at your typical performance level. The receiver's RF and AF indicators will help monitor signal strength and audio levels.
- Prova del sistema:
- Speak or sing into the connected microphone. Verify that audio is being received by the ACT-312 receiver and outputted to your sound system. Adjust the receiver's volume control as needed.
Manteniment
Regular maintenance helps prolong the life and performance of your wireless system.
- Neteja: Use a soft, dry cloth to wipe down the receiver and transmitters. Avoid using liquid cleaners, solvents, or abrasive materials, as these can damage the finish or internal components.
- Gestió de la bateria:
- Replace batteries in the bodypack transmitters when the low battery indicator appears or when audio quality degrades.
- Remove batteries from transmitters if the system will not be used for an extended period to prevent leakage and damage.
- Emmagatzematge: Store the system in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity. If transporting, use a padded case to protect components from physical shock.
- Cura de l'antena: Ensure antennas are not bent or damaged. Handle them carefully when connecting or disconnecting.
Resolució de problemes
Consulteu aquesta secció per conèixer els problemes comuns i les seves solucions.
| Problema | Causa possible | Solució |
|---|---|---|
| Sense sortida d'àudio |
|
|
| Interferència o estàtica |
|
|
| Àudio distorsionat |
|
|
| Interval de funcionament curt |
|
|
Especificacions
| Característica | Detall |
|---|---|
| Nom del model | ACT-312 (Receiver), ACT-32T2 (Bodypack Transmitter) |
| Marca | MIPRO |
| Tecnologia de connectivitat | Sense fil (UHF) |
| Interval de freqüència | 506-530 MHz (5A band) |
| Canals | De doble canal |
| Components inclosos | 1 x ACT-312 Receiver, 2 x ACT-32T2 Bodypack Transmitters, Antennas, Power Adapter |
| Mètode de control | Manual controls, App (if supported by specific model variant) |
| Color | Negre |
| Pes de l'article | Approximately 6 pounds (total system) |
| Usos específics | Professional/Stage performance, Presentations |
Garantia i Suport
For warranty information and technical support, please refer to the official MIPRO weblloc web o poseu-vos en contacte amb el vostre distribuïdor autoritzat. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
- Garantia: Specific warranty terms and duration may vary by region and retailer. Consult the documentation provided with your purchase or the manufacturer's weblloc per obtenir més informació.
- Suport tècnic: For assistance with setup, operation, or troubleshooting beyond this manual, contact MIPRO customer support or your local distributor.
