DD Audio 508E-D2 8-inch E-Series Subwoofer Instruction Manual

Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your DD Audio 508E-D2 8-inch E-Series Subwoofer. Please read this manual thoroughly before attempting installation or operation to ensure proper function and longevity of your product.

The DD Audio 508E-D2 is an 8-inch subwoofer designed for high-performance audio systems. It features a 2.5-inch voice coil and a 100oz magnet, delivering 500 Watts RMS power handling. Key design elements include a Free Flow Cooling System, high-temperature voice coil, dual-layer spider system with integrated tinsel leads, and a robust basket design.

Imatge: Anglesa view of the DD Audio 508E-D2 subwoofer, showcasing la seva construcció i disseny robustos.

Què hi ha a la caixa

Upon unpacking, please ensure all items are present and in good condition.

• 1 x DD Audio 508E-D2 8-inch Subwoofer

Image: The packaging box for the DD Audio 508E-D2 subwoofer, indicating the product as received.

Característiques

The DD Audio 508E-D2 subwoofer incorporates several advanced features for enhanced performance and durability:

• Free Flow Cooling System: Optimizes heat dissipation for sustained performance.
• High-Temperature Voice Coil: Designed to withstand demanding power levels.
• Dual Layer Spider System with Integrated Tinsel Leads: Provides improved excursion control and reliability.
• Extended Pole Piece: Contributes to increased magnetic linearity and reduced distortion.
• DD Logo Basket: Aesthetically designed and structurally rigid basket.
• Double Stitched EROM Surrounds: Enhances durability and cone excursion.
• Fiberglass Loaded Non-Pressed Cones: Offers a balance of rigidity and light weight for accurate sound reproduction.
• Embossed DDesign Magnet Boot: Protects the magnet assembly and adds to the product's finish.

Imatge: Primer pla view of the subwoofer cone and the double-stitched EROM surround, highlighting material quality.

Configuració i instal·lació

Una instal·lació correcta és crucial per a un rendiment i una seguretat òptims. Si no esteu segurs de cap dels passos a seguir, consulteu un instal·lador professional.

1. Enclosure Selection: The 508E-D2 is designed for use in a sealed or ported enclosure. Refer to the specifications section for recommended enclosure volumes (0.5 - 1.0 CuFt for ported). Ensure the enclosure is robust and properly sealed.
2. Muntatge:
   • Cut a mounting hole with a diameter of 7.125 inches (181mm).
   • Ensure sufficient mounting depth of 4.875 inches (124mm) is available.
   • Secure the subwoofer to the enclosure using appropriate screws, ensuring an airtight seal.
3. Cablejat: The 508E-D2 features a Dual 2-Ohm voice coil. Proper wiring is essential to match your amprequisits d'impedància del transformador.
   • For a 1-Ohm load (parallel wiring): Connect the positive terminal of voice coil 1 to the positive terminal of voice coil 2. Connect the negative terminal of voice coil 1 to the negative terminal of voice coil 2. Connect the amplifier's positive output to the combined positive terminals and the amplifier's negative output to the combined negative terminals.
   • For a 4-Ohm load (series wiring): Connect the positive terminal of voice coil 1 to the amplifier's positive output. Connect the negative terminal of voice coil 1 to the positive terminal of voice coil 2. Connect the negative terminal of voice coil 2 to the ampsortida negativa del lificador.

   Precaució: Incorrect wiring can damage your subwoofer and amplifier. Always verify impedance before connecting.

4. AmpConnexió del lifier: Connecteu el subwoofer a un dispositiu adequat amplifier capable of providing 500 Watts RMS at the chosen impedance. Use high-quality speaker wire of appropriate gauge.

Imatge: Primer pla view of the subwoofer's dual terminals, showing connection points for wiring.

Instruccions de funcionament

Once installed, follow these guidelines for optimal operation and to prevent damage.

1. Període d'entrada: Allow a break-in period of approximately 20-30 hours of moderate listening before operating the subwoofer at high power levels. This allows the suspension components to loosen and perform optimally.
2. Configuració de guany: Estableix el teu amplifier's gain correctly. Do not use the gain control as a volume knob. It should be set to match the output voltage of your head unit. Incorrect gain settings can lead to clipping and damage.
3. Configuració de crossover: Feu servir un filtre de pas baix (LPF) al vostre amplifier or head unit to send only low frequencies to the subwoofer. A typical starting point for an 8-inch subwoofer is 80-100 Hz with a slope of 12dB or 24dB per octave.
4. Filtre subsònic: Si el teu amplifier has a subsonic filter (high-pass filter for the subwoofer channel), set it slightly below your enclosure's tuning frequency (for ported enclosures) or around 25-30 Hz (for sealed enclosures) to protect the subwoofer from over-excursion at very low frequencies.
5. Control de volum: Always turn on your audio system with the volume at its lowest setting and gradually increase it. Avoid prolonged listening at maximum volume levels, especially if you notice distortion.

Manteniment

The DD Audio 508E-D2 subwoofer requires minimal maintenance to ensure long-term performance.

• Neteja: Netegeu periòdicament el con i el seu voltant amb un drap suau i sec per eliminar la pols i les restes. Eviteu utilitzar productes químics agressius o humitat excessiva.
• Inspecció: Inspeccioneu regularment el subwoofer per detectar qualsevol signe de danys al con, al voltant o a la tapa antipols. Comproveu si les connexions del cablejat estan ben ajustades i si hi ha corrosió.
• Factors ambientals: Protect the subwoofer from extreme temperatures, direct sunlight, and excessive moisture. While robust, these conditions can degrade materials over time.

Resolució de problemes

Si teniu problemes amb el subwoofer, consulteu els problemes i solucions més comuns següents:

If these steps do not resolve the issue, please contact DD Audio customer support or your authorized dealer.

Especificacions

Detailed technical specifications for the DD Audio 508E-D2 8-inch E-Series Subwoofer:

Informació de la garantia

The DD Audio 508E-D2 subwoofer comes with a Garantia limitada. Specific terms and conditions of the warranty are provided by DD Audio and typically cover manufacturing defects for a specified period from the date of purchase.

Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, abuse, accidental damage, or unauthorized modifications. For full warranty details, please refer to the documentation included with your product or visit the official DD Audio weblloc.

Suport

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact DD Audio customer support.

• Fabricant Weblloc: ddaudio.com (Si us plau, consulteu la informació oficial) weblloc web per obtenir la informació de contacte i els recursos d'assistència més actualitzats.)
• Distribuïdor Autoritzat: Contact the dealer from whom you purchased the product for local support.