1. Introducció
This manual provides essential instructions for the safe and effective operation of your GOOLOO GT4000S Jump Starter and GOOLOO GT150 Tire Inflator. Please read this manual thoroughly before use and retain it for future reference.
Image: The GOOLOO GT4000S Jump Starter (yellow and black unit with clamps) and the GOOLOO GT150 Tire Inflator (black rectangular unit with digital display).
2. Informació important de seguretat
Observeu sempre les següents precaucions de seguretat per evitar lesions o danys al dispositiu i al vehicle:
- Llegiu totes les instruccions abans d'utilitzar.
- Do not operate the jump starter if the cables or clamps estan danyats.
- Ensure correct polarity connection (red to positive, black to negative) to avoid sparks or damage.
- Do not jump start vehicles with battery voltagi diferent de 12V.
- Mantenir fora de l'abast dels nens.
- Do not expose to rain or extreme temperatures.
- Do not use the tire inflator for purposes other than inflating tires or compatible items.
- Avoid over-inflating tires; always check recommended PSI.
3. Producte acabatview
3.1 GOOLOO GT4000S Jump Starter
- Punt actual: 4000A
- Compatibilitat del motor: Fins a 12.0L de gasolina, 10.0L de dièsel
- Càrrega: 100W Fast-Charging (1.2 hours for full charge, 5 minutes for a single jumpstart). Type-C port for charging.
- Sortida: Up to 100W for charging MacBooks and other laptops (Type-C port only).
- Durada de la bateria: Up to 60 jumpstarts on a single full charge.
- Compatibilitat: Suitable for RVs, pickup trucks, motorcycles, SUVs, tractors, boats, and other 12V vehicles.
Image: The GOOLOO GT4000S Jump Starter connected to a car battery in an engine bay, illustrating its primary function.
3.2 GOOLOO GT150 Tire Inflator
- Pressió màxima: 150 PSI
- Velocitat d'inflació: Inflates a completely flat 205/55 R16 car tire (0-36PSI) in approximately 7 minutes.
- Característiques: Auto-shutoff, cordless design, portable size, ultra-bright LED screen for clear display.
- Compatibilitat: Suitable for car tires, SUV tires, motorcycle tires, bicycle tires, balls, kayaks, and swim rings.
Image: The GOOLOO GT150 Tire Inflator connected to a car tire, demonstrating its inflation capability.
4. Configuració i càrrega
4.1 Charging the GT4000S Jump Starter
- Connect the provided USB-C cable to the jump starter's Type-C input port.
- Connect the other end of the USB-C cable to a 100W fast-charging wall adapter (not included, unless specified in package contents) or a compatible car charger.
- The display will show the charging wattage i per cent de bateriatage. A full charge from 0% to 100% typically takes 1.2 hours with a 100W charger.
Image: The GOOLOO GT4000S Jump Starter being charged via its USB-C port inside a vehicle, highlighting its fast-charging capability.
4.2 Charging the GT150 Tire Inflator
The GT150 Tire Inflator is charged via its USB-C port. Connect it to a compatible USB-C charger. The LED screen will indicate the charging status.
Image: The GOOLOO GT150 Tire Inflator connected to a smartphone via a USB cable, demonstrating its power bank functionality.
5. Instruccions de funcionament
5.1 Using the GT4000S Jump Starter
- Ensure the jump starter is sufficiently charged (above 20%).
- Connecteu el cable pont clamps a la unitat d'arrencada de bateria.
- Enganxeu el cl vermellamp al terminal positiu (+) de la bateria del vehicle i al cl negreamp al terminal negatiu (-).
- Turn on the jump starter. The screen should display "READY" if the connection is correct and the battery is detectable.
- If the battery is completely dead or too low to detect, press the "BOOST" button for 1-2 seconds until "READY" is displayed. This forces the jump starter to provide maximum output.
- Engegueu el motor del vehicle en 30 segons.
- Un cop el vehicle arrenqui, retireu immediatament el clampde la bateria del cotxe i, a continuació, desconnecteu-los de l'arrencador.
Video: Official GOOLOO demonstration on how to jump start a car using a GOOLOO jump starter. This video illustrates the connection process and starting the vehicle.
5.2 Using the GT150 Tire Inflator
- Connect the air hose to the GT150 inflator and then securely attach it to the tire valve stem.
- Turn on the GT150. The LED screen will display the current tire pressure.
- Use the '+' and '-' buttons to set the desired target pressure.
- Premeu el botó d'engegada per iniciar la inflació. L'inflador s'aturarà automàticament un cop s'hagi assolit la pressió objectiu.
- Disconnect the air hose and store the unit.
Image: The GOOLOO GT150 Tire Inflator's LED screen showing both the real-time and preset tire pressure values, indicating its auto-shutoff feature.
6. Manteniment i emmagatzematge
- Store the units in a cool, dry place away from direct sunlight and moisture.
- Recharge the jump starter every 3-6 months to maintain battery health, even if not used.
- Clean the units with a dry, soft cloth. Do not use harsh chemicals.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Jump Starter not turning on | Low battery or faulty unit | Charge the unit fully. If issue persists, contact support. |
| "READY" not displayed (GT4000S) | Incorrect connection or battery too low | Comproveu clamp connections. Use "BOOST" function for completely dead batteries. |
| Tire Inflator not working (GT150) | Low battery, hose not connected properly | Charge the unit. Ensure hose is securely attached to tire valve. |
8. Especificacions
Arrancador de salt GOOLOO GT4000S
- Cim Ampera: 4000A
- Voltage: 12 V
- Tipus de bateria: Ió de liti
- Entrada de càrrega: USB-C (100W Max)
- Sortida USB: USB-C (100W Max), USB-A (various outputs)
GOOLOO GT150 Tire Inflator
- Pressió màxima: 150 PSI
- Font d'alimentació: Cordless (Internal Battery)
- Visualització: Ultra Bright LED Screen
9. Garantia i Suport
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official GOOLOO website. Please have your model numbers (GT4000S, GT150) ready when contacting support.
