Introducció
This user manual provides detailed instructions for the 1Mii ML300 Bluetooth 5.3 Transmitter Receiver and the 1Mii Y8 Hybrid Active Noise Cancelling Bluetooth Headphones. This bundle offers a versatile audio solution for various scenarios, including TV, airplane entertainment, and general wireless audio streaming.
Image: The 1Mii ML300 Bluetooth Transmitter Receiver and the 1Mii Y8 Hybrid Active Noise Cancelling Headphones, presented together as a bundle.
Informació de seguretat
Ensure to follow good safety practices when using, handling, and disposing of the Lithium-Ion battery. Be aware of potential interference with other wireless devices due to Bluetooth 5.3 technology.
Producte acabatview
1Mii ML300 Bluetooth Transmitter Receiver
The ML300 is a versatile 2-in-1 device that functions as both a Bluetooth transmitter and receiver, allowing you to add Bluetooth capabilities to non-Bluetooth audio devices.
- Transmissor i receptor 2 en 1: Easily converts non-Bluetooth devices (TV, PC, gym/flight equipment) into Bluetooth transmitters, or adds Bluetooth receiving capability to speakers/car/home stereo systems.
- Support aptX Low Latency/HD/Adaptive: Provides synchronized audio and video with aptX Low Latency, and high-fidelity audio with aptX HD/Adaptive (requires compatible receiving devices).
Image: The ML300 connected to a television, demonstrating its ability to transmit audio to two pairs of Bluetooth headphones simultaneously for shared viewing.
Image: The ML300 connected to an airplane's in-flight entertainment system, enabling wireless audio streaming to personal Bluetooth earbuds.
Image: The ML300 connected to a treadmill, illustrating its use for wireless audio during exercise without cable restrictions.
1Mii Y8 Hybrid Active Noise Cancelling Bluetooth Headphones
The Y8 headphones are designed for immersive listening with advanced noise cancellation and high-resolution audio capabilities.
- Advanced Noise Cancelling: Utilizes 5 ANC microphones to reduce ambient noise by up to 40dB, providing an immersive listening experience.
- Hi-Res Audio with LDAC: Features 40mm dynamic drivers and LDAC support for high-resolution wireless audio, delivering rich and detailed sound.
- Temps de joc ampliat: Offers up to 55 hours of music playback with ANC enabled, or 75 hours in standard mode. Quick charge provides 5 hours of play in 10 minutes. Supports wired connection via 3.5mm audio cable.
Image: The 1Mii Y8 headphones highlighting their support for Hi-Res Audio and LDAC technology, indicating superior sound quality.
Image: A close-up of the 1Mii Y8 headphone ear cup, visually representing the 40dB hybrid active noise cancellation capability.
Image: The 1Mii Y8 headphones shown in an airplane window, illustrating their long battery life of 75 hours (ANC off) and 55 hours (ANC on), with quick charge details.
Guia de configuració
1. Càrrega dels dispositius
- ML300: Connect the ML300 to a USB power source using the provided charging cable. The LED indicator will show charging status.
- Y8 Headphones: Connect the Y8 headphones to a USB power source using the provided charging cable. The LED indicator will show charging status. A full charge is recommended before first use.
2. Pairing the ML300 with Y8 Headphones (Transmitter Mode)
- Set ML300 to Transmitter (TX) Mode: Ensure the ML300 is switched to TX mode.
- Connect ML300 to Audio Source: Plug the ML300 into the audio output port (e.g., 3.5mm AUX, RCA) of your TV, PC, or other non-Bluetooth audio device.
- Enter Pairing Mode on ML300: Press and hold the Bluetooth pairing button on the ML300 until the LED indicator flashes rapidly, indicating it's in pairing mode.
- Enter Pairing Mode on Y8 Headphones: With the Y8 headphones powered off, press and hold the power button until the LED indicator flashes rapidly (usually blue and red alternately), indicating pairing mode.
- Connectar: Place the ML300 and Y8 headphones close to each other. They should automatically connect within a few seconds. The LED indicators on both devices will show a steady light once connected.
3. Pairing Y8 Headphones with Other Bluetooth Devices (e.g., Smartphone)
- Enter Pairing Mode on Y8 Headphones: With the Y8 headphones powered off, press and hold the power button until the LED indicator flashes rapidly.
- Activa el Bluetooth al teu dispositiu: Go to the Bluetooth settings on your smartphone, tablet, or computer.
- Select "1Mii Y8": Look for "1Mii Y8" in the list of available Bluetooth devices and select it to connect.
- Confirmeu la connexió: The LED on the Y8 headphones will turn solid blue once connected.
Instruccions de funcionament
1. 1Mii ML300 Operation
- Switching Modes (TX/RX): Use the physical switch on the ML300 to toggle between Transmitter (TX) and Receiver (RX) modes. Ensure the device is in the correct mode for your intended use.
- Pairing in TX Mode: After connecting to an audio source, press the pairing button to connect to Bluetooth headphones. The ML300 can connect to two pairs of headphones simultaneously.
- Pairing in RX Mode: Connect the ML300 to your non-Bluetooth speaker or stereo system. Enable Bluetooth on your phone/tablet and select "1Mii ML300" to stream audio.
- Selecció de còdec: Double-click the BT button 1 on the ML300 to cycle through supported audio codecs (aptX LL/HD/Adaptive). Ensure your connected device also supports the desired codec for optimal performance.
2. 1Mii Y8 Headphones Operation
- Encès/apagat: Mantén premut el botó d’engegada durant 3 segons per engegar-lo o apagar-lo.
- Cancel·lació activa del soroll (ANC): Press the ANC button to toggle ANC on/off. The LED indicator will illuminate when ANC is active.
- Control de volum: Use the '+' and '-' buttons to adjust volume.
- Control de la pista: Press and hold '+' for next track, '-' for previous track.
- Reproduir/pausa: Press the multi-function button (usually the power button or a dedicated play/pause button) once to play or pause audio.
- Gestió de trucades: Press the multi-function button to answer/end calls. Press and hold to reject calls.
- Mode per cable: Insert the 3.5mm audio cable into the headphone's audio jack and your audio source for wired listening, even when the battery is depleted.
Manteniment
- Neteja: Use a soft, dry cloth to clean the surfaces of both the ML300 and Y8 headphones. Do not use liquid cleaners or abrasive materials.
- Emmagatzematge: Store the devices in a cool, dry place away from direct sunlight and extreme temperatures. When storing for extended periods, ensure the batteries are partially charged (around 50%) to prolong battery life.
- Cura de la bateria: Avoid fully discharging the batteries frequently. Recharge them regularly, even if not in constant use.
Resolució de problemes
ML300 Troubleshooting
- No Sound in TX Mode:
- Ensure the ML300 is in TX mode and properly connected to the audio source.
- Verifiqueu que la font d'àudio s'està reproduint i que el volum està pujat.
- Check if the headphones are paired and connected to the ML300.
- No Sound in RX Mode:
- Ensure the ML300 is in RX mode and properly connected to your speaker/stereo system.
- Verify your phone/tablet is connected to the ML300 via Bluetooth and playing audio.
- Check the volume levels on both your source device and the connected speaker.
- Audio Latency (Delay):
- Ensure both the ML300 and your headphones support aptX Low Latency.
- Double-click BT button 1 on the ML300 to select the aptX LL codec if available.
- No es pot emparellar:
- Ensure both devices are in pairing mode and within close proximity.
- Clear previous pairing records on both devices if necessary and try again.
- Reinicieu els dos dispositius.
Y8 Headphones Troubleshooting
- Els auriculars no s'encenen:
- Assegureu-vos que els auriculars estiguin completament carregats.
- Press and hold the power button for the required duration (3 seconds).
- Sense so dels auriculars:
- Check if the headphones are paired and connected to your audio source (ML300 or other device).
- Adjust the volume on both the headphones and the audio source.
- Try connecting via the 3.5mm audio cable to rule out Bluetooth issues.
- ANC no funciona eficaçment:
- Ensure the ANC feature is turned on.
- Check if the earcups are properly sealed around your ears.
- Durada de la bateria curta:
- Assegureu-vos que els auriculars estiguin completament carregats abans d'utilitzar-los.
- Using ANC continuously or listening at very high volumes can reduce battery life.
Especificacions
| Característica | 1Mii ML300 | 1Mii Y8 Headphones |
|---|---|---|
| Tecnologia de connectivitat | Bluetooth 5.3 | Bluetooth |
| Funció | Transmitter & Receiver (2-in-1) | Auriculars sense fil |
| Còdecs d'àudio | aptX Low Latency, aptX HD, aptX Adaptive | LDAC, Standard Bluetooth Codecs |
| Cancel·lació de soroll | N/A | Hybrid Active Noise Cancelling (up to 40dB) |
| Mida del controlador | N/A | Controlador dinàmic de 40 mm |
| Hora de joc | Varies by use (internal battery) | Fins a 75 hores (ANC desactivat), 55 hores (ANC activat) |
| Càrrega ràpida | N/A | 10 minuts de càrrega per a 5 hores de reproducció |
| Font d'alimentació | Funciona amb bateria | Funciona amb bateria |
| Color | Negre | Negre |
Nota: Les especificacions estan subjectes a canvis sense previ avís.
Garantia i Suport
1Mii products are designed with quality and reliability in mind. For warranty information, technical support, or any inquiries regarding your ML300 and Y8 bundle, please refer to the official 1Mii weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.
Official 1Mii Store: Visita la botiga 1Mii a Amazon
