Introducció
The KVH K4 EdgeServer Pro 6-Port Hub Network Management Device is designed to provide robust and efficient network connectivity and management for various applications. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your EdgeServer.
Contingut del paquet
- KVH K4 EdgeServer Unit
- Adaptador d'alimentació
- (Other components may vary based on specific package)
Dispositiu acabatview
Panell frontal
This image displays the front panel of the KVH K4 EdgeServer. From left to right, it features the KVH logo, a power button with an indicator light, a small reset button, an HDMI output port, two USB ports labeled "UWAN1" and "UWAN2", and two additional USB ports labeled "FP/MGMT" and "VSAT/MGMT". These ports facilitate various connections for network management and peripheral devices.
Panell posterior
This image shows the rear panel of the KVH K4 EdgeServer. On the left, there is a +12VDC power input jack. To its right, there are six Ethernet ports, labeled "LAN", "WAN5", "WAN4", "WAN3", "WAN2", and "WAN1". These ports are used for connecting to local area networks (LAN) and wide area networks (WAN), enabling the device's hub and management functionalities. Small indicator lights are visible next to some ports.
Configuració
Desempaquetar el dispositiu: Carefully remove the KVH K4 EdgeServer and all accessories from the packaging.
Connectar l'alimentació: Insert the power adapter cable into the +12VDC power input jack on the rear panel of the EdgeServer. Plug the power adapter into a suitable electrical outlet.
Connecteu els cables de xarxa: Connect your network devices (e.g., computers, routers, modems) to the appropriate LAN and WAN Ethernet ports on the rear panel using standard Ethernet cables. Refer to the Dispositiu acabatview section for port identification.
Connectar perifèrics (opcional): If needed, connect a display via the HDMI port and input devices (keyboard/mouse) via the USB ports on the front panel.
Encès: Press the power button on the front panel. The power indicator light should illuminate.
Instruccions de funcionament
Once powered on and connected, the KVH K4 EdgeServer will begin its boot sequence. The device is designed for network management and will typically be configured via a web interface or dedicated software. Consult the specific software documentation for detailed operating procedures.
- Encès/apagat: Press the power button on the front panel to turn the device on or off. A brief press typically initiates a graceful shutdown.
- Indicadors d'estat: Observe the LED indicators on the front and rear panels for system and network status. Refer to the software manual for specific LED behavior interpretations.
- Configuració de la xarxa: Access the device's management interface (usually via a web browser) to configure network settings, port assignments, and other management features.
Manteniment
- Neteja: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners or aerosols. Ensure the ventilation fins on top are free from dust and debris to maintain proper airflow.
- Condicions ambientals: Operate the device in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture.
- Actualitzacions de firmware: Periodically check the KVH support website for firmware updates to ensure optimal performance and security. Follow the provided instructions for updating the firmware.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s'encén. | Sense alimentació, adaptador de corrent defectuós o connexió fluixa. | Ensure the power adapter is securely connected to the device and the electrical outlet. Try a different outlet. Verify the power adapter is functioning correctly. |
| Sense connectivitat de xarxa. | Incorrect cable connection, network configuration issue, or modem/router problem. | Check all Ethernet cable connections. Verify network settings in the device's management interface. Restart connected network devices (modem, router). |
| El dispositiu no respon. | Software error or system freeze. | Perform a hard reboot by disconnecting and reconnecting the power. If the issue persists, consult KVH support. |
Especificacions
| Característica | Detall |
|---|---|
| Nom del model | 72-1056-01 |
| Marca | KVH |
| Fabricant | KVH |
| Color | Negre |
| Material | Plàstic |
| Pes de l'article | 6 lliures (aprox. 2.72 kg) |
| Pes del paquet | 5.3 lliures (aprox. 2.40 kg) |
| Dimensions del paquet (L x W x H) | 11 x 9 x 6 polzades (aprox. 27.9 x 22.9 x 15.2 cm) |
| ASIN | B0D7RKP12H |
| UPC | 028327015118 |
| Primera data disponible | 22 de juny de 2024 |
Garantia i Suport
The KVH K4 EdgeServer comes with a standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty documentation included with your product or visit the official KVH weblloc.
For technical support, troubleshooting assistance, or to inquire about service, please contact KVH Customer Support:
- Weblloc: www.kvh.com/support (Exampl'enllaç, si us plau, verifiqueu la pàgina de suport oficial)
- Correu electrònic: support@kvh.com (Example email, please verify official support contact)
- Telèfon: Refer to the KVH weblloc web per a números de telèfon d'assistència regional.
Please have your model number (72-1056-01) and ASIN (B0D7RKP12H) ready when contacting support.
