ROBOTIME Red Rose 3D Wooden Flower Puzzle Instruction Manual

Introducció

This manual provides detailed instructions for assembling and maintaining your ROBOTIME Red Rose 3D Wooden Flower Puzzle. Please read through all steps carefully before beginning assembly to ensure a smooth and enjoyable building experience. This kit is designed for adults and recommended for ages 14 and up.

Informació de seguretat

ADVERTIMENT: No apte per a nens menors de 3 anys a causa de peces petites que poden presentar un perill d'asfixia.

• Keep all components away from open flames or high heat sources.
• Exercise caution when handling small or delicate pieces to prevent breakage.
• Eliminar els materials d'embalatge de manera responsable.

Configuració

Contingut del paquet

Verify that all components are present in your kit:

• Laser Cut Wood Pieces
• Llibre d'instruccions

Passos previs al muntatge

1. Clear a well-lit, flat workspace.
2. Carefully remove all wooden pieces from their sheets. Use a small tool or your fingers to gently push them out.
3. Organize pieces by type or number as indicated in the instruction book.
4. Inspect all pieces for any damage or defects.

Instruccions de muntatge

The ROBOTIME Red Rose puzzle features an interlocking mortise-and-tenon design, which means no glue is required for assembly. Follow the detailed steps in the included instruction book and refer to the visual aids below.

Muntatge pas a pas

1. Begin by identifying the base pieces for the pot and the stem.
2. Assemble the pot by interlocking the designated wooden panels.
3. Carefully attach the rose petals to form the flower head, ensuring each piece fits securely into its corresponding slot.
4. Connect the assembled flower head to the stem pieces.
5. Integrate the leaves and any decorative elements onto the stem.
6. Insert the completed rose assembly into the pot.
7. Adjust the stem height and flower angle as desired to achieve your preferred display.

Guies de vídeo de muntatge

For visual guidance, refer to the official assembly videos provided by ROBOTIME:

Manteniment

To ensure the longevity and appearance of your ROBOTIME Red Rose 3D Wooden Flower Puzzle, follow these maintenance guidelines:

• Neteja: Gently dust the assembled model with a soft, dry cloth or a soft brush. Avoid using water or chemical cleaners, as these can damage the wood or paint.
• Emmagatzematge: Keep the model in a dry environment, away from direct sunlight or extreme temperature changes, which can cause warping or fading.
• Manipulació: Handle the assembled flower with care, especially the delicate petals and stem, to prevent accidental breakage.

Resolució de problemes

Encountering issues during assembly? Here are some common solutions:

• Peces que no encaixen: Ensure you are using the correct pieces for each step. Refer to the instruction book's diagrams. Do not force pieces together, as this can cause damage.
• Peces trencades: The kit often includes extra pieces for certain delicate parts. If a piece breaks, check for a spare. For significant breakage or missing parts, refer to the support section.
• Connexions fluixes: While glue is not required, if a connection feels too loose, a tiny drop of wood glue (not included) can be used for reinforcement, applied carefully to the hidden parts of the joint.

Especificacions

Garantia i Suport

ROBOTIME is committed to customer satisfaction. If any parts are broken or lost during the assembly process, a part replacement service is available. Please contact ROBOTIME customer support for assistance.

For further inquiries or to explore more products, visit the official ROBOTIME store: ROBOTIME Store on Amazon.