ANCEL FX3000 Elite OBD2 Scanner & PB500 Power Circuit Probe Tester User Manual

1. Introducció

This manual provides detailed instructions for the ANCEL FX3000 Elite OBD2 Scanner Diagnostic Tool and the ANCEL PB500 Power Circuit Probe Tester. These tools are designed to assist automotive professionals and enthusiasts in diagnosing vehicle issues and performing electrical system tests.

1.1 Producte acabatview

The ANCEL FX3000 Elite is a comprehensive OBD2 scanner capable of diagnosing four core vehicle systems: Engine, Anti-lock Braking System (ABS), Supplemental Restraint System (SRS/Airbag), and Transmission. It offers full OBD2 functions, including reading and clearing fault codes, live data streaming, and I/M readiness status checks. The device supports Wi-Fi updates for convenient software upgrades.

The ANCEL PB500 is a versatile power circuit probe tester designed for 12V/24V vehicle electrical systems. It can test DC/AC voltage, frequency, duty cycle, resistance, and diode, as well as activate components, test continuity, locate short circuits, and check ground connections.

Figure 1.1: ANCEL FX3000 Elite OBD2 Scanner and PB500 Power Circuit Probe Tester.

This image displays both the ANCEL FX3000 Elite OBD2 Scanner on the left and the ANCEL PB500 Power Circuit Probe Tester with its accessories on the right, showcasinel paquet complet del producte.

1.2 Contingut del paquet

• 1 x ANCEL FX3000 Elite OBD2 Scanner
• 1 x ANCEL PB500 Power Circuit Probe Tester

2. Informació de seguretat

Always observe the following safety precautions when using the ANCEL FX3000 Elite and PB500 to prevent personal injury or damage to the vehicle or tools.

• Always wear ANSI-approved eye protection when working on or around vehicles.
• Mantingueu la roba, els cabells, les mans, les eines i l'equip de prova allunyats de totes les parts del motor en moviment o calentes.
• Work in a well-ventilated area. Exhaust gases are poisonous.
• Mantingueu a prop un extintor adequat per a incendis de gasolina, químics o elèctrics.
• Do not connect or disconnect any test equipment while the ignition is on or the engine is running, unless specifically instructed to do so.
• Keep the tools dry, clean, free from oil, water, and grease. Use a mild detergent on a clean cloth to clean the exterior.
• Do not use the tools if they are damaged.
• For the PB500, ensure proper connection to the vehicle's power source (12V/24V) and avoid contact with high voltage components.

3. Configuració i ús inicial

3.1 ANCEL FX3000 Elite Setup

The FX3000 Elite is designed for quick and easy setup, often referred to as 'Plug and Play'.

1. Plug into OBD2 Connector: Locate your vehicle's 16-pin OBD2 diagnostic port, typically found under the dashboard on the driver's side. Plug the FX3000 Elite's cable into this connector.
2. Turn on the Car Engine: Ensure the vehicle's ignition is in the 'ON' position or the engine is running, as required for the diagnostic test.
3. Enter Diagnostic Scanner to Start Diagnosis: The device will power on automatically. Navigate the menu using the directional buttons and select 'Diagnose' to begin.

Figure 3.1: ANCEL FX3000 Elite Plug and Play Setup Steps.

This image illustrates the three simple steps for setting up the ANCEL FX3000 Elite: plugging into the OBD2 connector, turning on the car engine, and initiating diagnosis.

3.2 ANCEL PB500 Power Circuit Probe Tester Setup

To use the PB500, connect it to the vehicle's power source.

1. Connecteu el cl vermellamp al terminal positiu (+) de la bateria del vehicle.
2. Connecteu el cl negreamp to the negative (-) terminal of the vehicle's battery or a good chassis ground.
3. The PB500 will power on, and you can select the desired working mode.

4. Instruccions de funcionament

4.1 ANCEL FX3000 Elite Operation

The FX3000 Elite provides comprehensive diagnostic capabilities for various vehicle systems.

4.1.1 4-System Diagnosis (Engine, ABS, SRS, Transmission)

The FX3000 Elite can read and clear fault codes for the four most important vehicle systems.

Figure 4.1: ANCEL FX3000 Elite Enhanced 4 System Diagnosis.

This image visually represents the four key systems the FX3000 Elite can diagnose: ABS, Transmission, SRS (Airbag), and Engine.

To perform a 4-system diagnosis:

1. Al menú principal, seleccioneu "Diagnòstic".
2. Choose the specific system you wish to diagnose (e.g., Engine, ABS, SRS, Transmission).
3. The scanner will establish communication with the vehicle and display any detected Diagnostic Trouble Codes (DTCs).
4. You can then choose to 'Read Codes' to view definitions, 'Clear Codes' to erase them, or view 'Live Data' for real-time sensor information.

Figure 4.2: ANCEL FX3000 Elite Reading and Clearing Fault Codes.

This image demonstrates the process of reading fault codes from the dashboard and subsequently clearing them using the ANCEL FX3000 Elite, aiming to turn off warning lights like ABS, Airbag, Engine, or Transmission.

4.1.2 Funcions OBD2 completes

The FX3000 Elite supports all 10 modes of OBD2 testing.

Figure 4.3: ANCEL FX3000 Elite OE-Level OBD2 Scanner Diagnostic Tool Functions.

This image displays the various OBD2 functions available on the ANCEL FX3000 Elite, including Clear Code, Read Code, Freeze Frame, Retrieve Vehicle Info, On-Board Monitor Test, EVAP System Test, O2 Sensor Test, View Live Data, DTC Lookup, and I/M Readiness.

• Llegir codis: Retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, and pending codes.
• Codis clars: Clears Diagnostic Trouble Codes (DTCs) and resets the Check Engine Light (MIL).
• Flux de dades en directe: Displays real-time data from the vehicle's sensors in text or graph format.
• Congela les dades del fotograma: Shows the engine conditions at the time a DTC was set.
• Estat de preparació I/M: Comprova la disponibilitat dels sistemes de monitorització d'emissions.
• Prova del sensor d'O2: Recupera els resultats de la prova del monitor del sensor d'O2.
• Prova del monitor integrat: Recupera els resultats de les proves de components i sistemes del tren motriu relacionats amb les emissions.
• Prova del sistema EVAP: Initiates a test of the vehicle's Evaporative Emission System.
• Informació del vehicle (VIN): Retrieves the Vehicle Identification Number, Calibration ID, and Calibration Verification Number.
• Cerca DTC: Provides definitions for diagnostic trouble codes directly on the device.

4.1.3 Wi-Fi Update

The FX3000 Elite supports convenient Wi-Fi updates for software and firmware.

Figure 4.4: ANCEL FX3000 Elite One-Click WiFi Update.

This image highlights the ANCEL FX3000 Elite's capability for one-click Wi-Fi updates, emphasizing its ease of use compared to wired update methods.

Per actualitzar el dispositiu:

1. Connect the FX3000 Elite to a Wi-Fi network or phone hotspot.
2. Al menú principal, seleccioneu "Actualitza".
3. Follow the on-screen prompts to download and install the latest software.

4.2 ANCEL PB500 Power Circuit Probe Tester Operation

The PB500 offers multiple working modes for various electrical tests.

Figure 4.5: ANCEL PB500 Power Circuit Probe Tester 7 Working Modes.

This image illustrates the seven distinct working modes of the ANCEL PB500: DC Voltage, AC Voltage, Frequency, Duty Cycle, Resistance, Diode, and Fuel Inject, suitable for 12V/24V cars.

Figure 4.6: ANCEL PB500 Circuit Probe Kit Features.

This image highlights the key functionalities of the ANCEL PB500, including activating components (in hand and in vehicle), testing voltage & polarity, continuity, single circuits, locating short circuits, and checking bad ground connections.

• DC Voltage Prova: Mesura el volum de corrent continutage.
• Vol. ACtage Prova: Mesura el volum de corrent alterntage.
• Frequency Test: Mesura la freqüència d'un senyal de corrent altern.
• Duty Cycle Test: Measures the percentage of time a signal is active.
• Prova de resistència: Mesura la resistència elèctrica.
• Prova de díode: Comprova el funcionament dels díodes.
• Fuel Inject Test: Specific mode for testing fuel injectors.
• Activating Components: Safely power components on or off for testing.
• Prova de continuïtat: Checks for open or closed circuits.
• Locating Short Circuits: Helps pinpoint short circuits in the vehicle's wiring.
• Checking Bad Ground: Identifies poor ground connections.

4.2.1 Modes de visualització

The PB500 offers two display modes for certain measurements.

Figure 4.7: ANCEL PB500 Power Circuit Probe Tester 2 Forms Display Mode.

This image demonstrates the ANCEL PB500's ability to switch between Waveform Display Mode and Digital Display Mode for measurements like AC Voltage, Frequency, Duty Cycle, and Fuel Inject Modes.

A AC Voltage, Frequency, Duty Cycle, and Fuel Inject Modes, you can switch between Waveform Display Mode and Digital Display Mode for a more detailed analysis of the signal.

5. Manteniment

Proper maintenance ensures the longevity and accuracy of your ANCEL diagnostic tools.

• Neteja: Utilitzeu un suau, damp cloth with a mild detergent to clean the exterior of the devices. Do not use abrasive cleaners or solvents.
• Actualitzacions de programari: Regularly check for and install software updates for the FX3000 Elite via Wi-Fi to ensure compatibility with new vehicle models and access to the latest features and DTC definitions. The FX3000 Elite offers free lifetime updates.
• Emmagatzematge: Store the tools in a clean, dry environment, away from extreme temperatures, direct sunlight, and corrosive materials.
• Inspecció del cable: Periodically inspect all cables and connectors for signs of wear, damage, or corrosion. Replace if necessary.

6. Solució De Problemes

If you encounter issues with your ANCEL FX3000 Elite or PB500, refer to the following common troubleshooting tips.

6.1 ANCEL FX3000 Elite Troubleshooting

• El dispositiu no s'encén: Ensure the OBD2 connector is securely plugged into the vehicle's port. Check the vehicle's battery voltage; it must be sufficient to power the device.
• Error de comunicació: Verify the vehicle's ignition is on or the engine is running. Check if the vehicle supports the OBD2 protocol. Try connecting to a different vehicle to rule out a vehicle-specific issue.
• Codis que no s'esborren: Ensure the vehicle's ignition is on and the engine is off. Some codes may require multiple drive cycles to clear or may indicate a persistent underlying issue that needs repair.
• Wi-Fi Update Failure: Check your Wi-Fi connection strength. Ensure there is sufficient storage space on the device for the update. Try restarting the device and the update process.

6.2 ANCEL PB500 Troubleshooting

• El dispositiu no s'encén: Ensure the red and black clamps are securely connected to the correct battery terminals (positive and negative, respectively). Verify the vehicle's battery has sufficient charge.
• Lectures inexactes: Ensure the probe tip has good contact with the circuit being tested. Check for corrosion on the battery clamps or probe tip.
• No Continuity/Voltage Lectura: Confirm the circuit is powered and intact. Check for open circuits or blown fuses.

If problems persist, contact ANCEL customer support for further assistance.

7. Especificacions

8. Garantia i Suport

The ANCEL FX3000 Elite comes with free lifetime software upgrades, ensuring your tool remains up-to-date with the latest vehicle data and diagnostic capabilities.

For technical support, warranty claims, or any questions regarding the operation of your ANCEL FX3000 Elite or PB500, please contact ANCEL customer service through their official website or the retailer where the product was purchased. Please have your product model and purchase information ready when contacting support.