Manual d'instruccions de la bomba de calor per a piscina TURBRO Manatee M20 de 20,000 BTU

Introducció

The TURBRO Manatee M20 Swimming Pool Heat Pump is designed to efficiently warm your pool water, extending your swimming season. This all-electric heater utilizes heat pump technology to provide a comfortable water temperature for above-ground and smaller in-ground pools and spas.

Informació important de seguretat

• The unit has an IPX4 waterproof rating.
• It is equipped with a UL STD. 943 compliant three-prong plug and an ETL-approved GFCI leakage protection switch.
• The control panel can be automatically or manually locked to prevent accidental changes.
• Always ensure the pool pump is running when the heat pump is operating to prevent damage to the unit.

Contingut del paquet

The TURBRO Manatee M20 package includes:

• 1 x TURBRO Manatee M20 Heat Pump Unit
• Mànega clamps
• Connectors de mànega
• Guia d'instal·lació
• GFCI Leakage Protection Plug (5.5 ft Power Cord)
• Mànega ajustable Clamp x 2
• Connectors x 2 (φ1.5" to φ1.25")

Configuració i instal·lació

The Manatee M20 is designed for easy, one-person assembly. No professional help is typically needed for installation.

Abans de començar

• Ensure outdoor temperatures are 60°F or above for most efficient operation.
• Water hoses and a pool filter are not included and must be purchased separately.
• The heat pump is compatible with saltwater pools.

Passos de connexió

1. Connect the water hoses (not included) from your pool filter system to the heat pump's inlet and outlet ports. Use the provided hose clamps and connectors to secure the connections.
2. Plug the GFCI leakage protection plug into a suitable electrical outlet.
3. Turn on the heat pump using the control panel.

Instruccions de funcionament

The Manatee M20 features an intuitive digital control panel for precise temperature adjustments and system monitoring.

Tauler de control acabatview

Configuració de la temperatura desitjada

Use the "Up" and "Down" arrows on the control panel to set your desired water temperature. The heat pump can warm pools up to 104°F.

Consells de funcionament importants

• Heat pumps perform most efficiently when outdoor temperatures are 60°F or above.
• Performance and efficiency may be affected by decreasing outdoor temperatures and pool size.
• Using a swimming pool cover in colder weather helps retain heat and reduces heating time.
• Always ensure your pool filter pump is running when the heat pump is active to prevent damage.

Manteniment

Un manteniment regular garanteix un rendiment òptim i una llarga vida útil de la bomba de calor.

• Mantingueu la zona al voltant de la bomba de calor neta de deixalles per garantir un flux d'aire adequat.
• Periodically inspect hoses and connections for leaks or damage.
• Clean the heat pump's exterior as needed.

Resolució de problemes

Problemes comuns

• E03 Error (Water Flow Switch Fault): This error indicates a water flow issue. Ensure your pool pump is running and there are no blockages in the water lines. If the pool pump is off, the heat pump will display this error as a safety mechanism.
• Calefacció insuficient: Check outdoor temperatures (efficiency decreases below 60°F). Ensure your pool is covered to retain heat. Verify the heat pump is correctly sized for your pool volume.
• Funcionament sorollós: The Manatee M20 operates quietly (48dB at 3.3 feet). If excessive noise occurs, check for obstructions around the fan or loose components.

Especificacions

Garantia i Suport

For warranty information or technical support, please refer to the contact details provided in your product's installation guide or visit the official TURBRO weblloc.

Protection plans are available for extended coverage. (Refer to Pla de protecció de 3 anys)