Introducció
Thank you for choosing the EverBrite Headlamp Flashlight. This super bright LED headlamp is designed for various activities such as camping, running, hiking, and automotive repairs, offering versatile lighting with its 4 modes, zoomable lens, and motion sensor. This manual provides detailed instructions for safe and effective use, setup, operation, and maintenance of your headlamp.
Figure 1: EverBrite Headlamp Flashlight (Blue model) with charging cable and motion sensor illustration.
Informació de seguretat
- No mireu directament a la llum LED quan estigui encesa, ja que pot causar una discapacitat visual temporal.
- Mantenir fora de l'abast dels nens.
- No desmunteu el capçalamp; this will void the warranty and may cause damage.
- Utilitzeu només el cable USB proporcionat per carregar.
- Eviteu exposar el capamp a temperatures extremes o a la llum solar directa durant períodes prolongats.
- Assegureu-vos que la tapa del port de càrrega estigui ben tancada quan no estigui carregant per mantenir la integritat impermeable.
Què hi ha a la caixa
- EverBrite Headlamp Llanterna
- Cable de càrrega USB
Configuració
1. Carregant el capamp
Abans del primer ús, carregueu completament el capçalamp. El capamp features a built-in 1200 mAh rechargeable battery.
- Localitza el port de càrrega USB al capçalamp.
- Connect the provided USB cable to the headlampel port de càrrega.
- Connect the other end of the USB cable to a compatible USB power source (e.g., power bank, computer, car charger).
- The power indicator lights on the lamp will show the charging progress. When all lights are solid, the headlamp està completament carregat.
- Charging time is approximately 2.5 to 3 hours. The headlamp will not operate while charging.
Figure 2: Battery indicator and charging port. The four blue dots indicate battery levels: 25%, 50%, 75%, and 100% charged.
Figure 3: Quick and easy charging via power bank, computer, or car charger.
2. Ajust de la diadema
The elastic headband is adjustable to fit various head sizes comfortably. Simply slide the buckles on either side of the headband to tighten or loosen it for a secure fit.
Instruccions de funcionament
1. Selecció de potència i mode
El capamp features a main ON/OFF switch to cycle through its lighting modes.
- Premsa curta: Press the ON/OFF switch to cycle through the 4 white lighting modes:
- High Light Mode (600 Lumens)
- Medium Light Mode (250 Lumens)
- Low Light Mode (80 Lumens)
- Mode estroboscòpic
- Funció de memòria: After 8 seconds of use in any mode, turning the headlamp off and then back on will instantly resume the last used setting. This eliminates the need to cycle through all modes again.
Figure 4: Dual switch design with ON/OFF switch and Induction Function Switch. Displays High, Medium, Low, and Strobe light modes.
Figure 5: Four lighting modes: 600LM (2H runtime), 250LM (3.5H runtime), 80LM (10H runtime), and Strobe Mode.
Video 1: Demonstration of the headlamp's 4 modes, motion sensor, memory function, and zoomable feature. This video shows how to switch between high, medium, low, and strobe light modes, activate the motion sensor for hands-free operation, and adjust the beam from spotlight to floodlight.
3. Motion Sensor Activation
The motion sensor allows for convenient, hands-free operation, perfect when your hands are dirty, wet, or gloved.
- Activar: In any light mode, press and hold the dedicated sensor switch for 3 seconds. A small indicator light will confirm activation.
- Funciona: Once activated, simply wave your hand within 15cm (approximately 6 inches) of the headlamp per encendre o apagar la llum.
- Desactivar: Press and hold the sensor switch again for 3 seconds to turn off the sensor function.
Figure 8: Motion sensor activation by holding the switch for 3 seconds, with a sensing distance of 15cm. Illustrates waving a hand to control the light.
Figure 9: User demonstrating the motion sensor feature, showing how a simple hand wave can turn the light on or off.
4. Ajust de la inclinació
El capamp can be tilted up to 75° to direct light precisely where needed. The durable card-wheel design ensures the chosen angle remains locked in place during use.
Figura 10: El capçalamp can be tilted up to 75 degrees for precise illumination, secured by a card-wheel design.
Manteniment
- Neteja: Netegeu el capamp amb un suau, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Emmagatzematge: Guardeu el capamp en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes. Si l'emmagatzemeu durant un període prolongat, carregueu la bateria cada 3-6 mesos per mantenir-la en bon estat.
- Resistència a l'aigua: El capamp has an IPX4 waterproof rating, meaning it is resistant to splashing water from any direction. It is not designed for submersion. Ensure the charging port cover is sealed when not charging.
Figure 11: Sturdy lamp body features a durable ABS construction, passed a one-meter drop test, and achieved an IPX4 waterproof rating, making it corrosion-resistant and shockproof.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Capamp no s'encén. | La bateria està esgotada. | Carregueu el capamp plenament. |
| La llum és tènue o parpelleja. | Bateria baixa. | Recarrega el capamp. |
| El sensor de moviment no respon. | Sensor not activated or obstruction. | Ensure sensor mode is activated (hold sensor switch for 3s). Clear any obstructions in front of the sensor. Ensure hand is within 15cm. |
| Capamp no carregant. | Cable o font d'alimentació defectuosos. | Prova un altre cable USB o adaptador de corrent. Assegura't que les connexions siguin segures. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | EverBrite |
| Número de model | E021074AE |
| Tipus de font de llum | LED |
| Brillantor | 600 lúmens (màx.) |
| Modes d'il·luminació | Alt, Mig, Baix, Estroboscòpic |
| Característiques especials | Adjustable Focus (Zoomable), Adjustable Light Modes, Adjustable Strap, Motion Sensor, Rechargeable, Memory Function |
| Ajust d'inclinació | Fins a 75° |
| Font d'alimentació | Rechargeable (Built-in Lithium Ion Battery) |
| Capacitat de la bateria | 1200 mAh |
| Temps d'execució | Up to 10 hours (Low Light Mode) |
| Nivell de resistència a l'aigua | IPX4 (resistent a l'aigua) |
| Material | Metal, Plastic (ABS Shell) |
| Dimensions del producte | 2.11 "P x 3.35" W x 3.94" H |
| Pes de l'article | 5.6 unces |
Garantia i Suport
EverBrite products are manufactured with quality and durability in mind. For any questions, concerns, or warranty claims regarding your EverBrite Headlamp Flashlight, please contact the seller or EverBrite customer support. Please refer to your purchase documentation for specific warranty terms and contact information.
You can also visit the official EverBrite store for more information and support: EverBrite Store on Amazon
