GLEDOPTO ESP32 WLED Digital LED Controller with Mic / UART User Manual GL-C-015WL-D

1. Introducció

This manual provides essential instructions for the installation, operation, and maintenance of your GLEDOPTO ESP32 WLED Digital LED Controller (Model GL-C-015WL-D). Please read this manual thoroughly before using the product to ensure proper function and safety.

2. Informació important de seguretat

The controller chip is ESP32. Verify firmware version information carefully before upgrading. Incorrect firmware upgrades can damage the product.
Assegureu-vos que l'entrada voltage (5-24V DC) matches your power supply and LED strip requirements.
Do not exceed the maximum output current of 10A per channel or 15A total.
Operate the device within the specified temperature range of -20 to 45 °C.
Aquest producte està dissenyat només per a ús interior.
Desconnecteu l'alimentació abans de realitzar qualsevol cablejat o manteniment.

3. Producte acabatview

3.1 Contingut del paquet

1 x GLEDOPTO ESP32 WLED Digital LED Controller with Mic / UART (Model: GL-C-015WL-D)
1 x Manual d'usuari
1 x 3cm Damper

3.2 Característiques clau

ESP32 Chip: High-performance processing and stable network connectivity.
Micròfon integrat: Captures ambient sounds for music synchronization and dynamic lighting effects.
UART Download Port: Facilitates firmware upgrades and debugging without complex hardware operations.
Simple Wiring & Expandability: Easy connection ports and an added IO33 port for customization.
Rich Dynamic Modes: Over 100 dynamic lighting effects available.
Àmplia compatibilitat: Supports various addressable LED strips including WS2811, WS2812, WS2812B, FL19038, SK6812, SM16703P, SM16703SP3, TM1814, WS2813, WS2815, and FCOB.
Baix consum d'energia: Integrated switching regulator for ESP32 power and a MOSFET relay to disable output power when WLED is off.

4. Especificacions

Número de model	GL-C-015WL-D
Entrada Voltage	DC 5-24V
Max Addressable ICs	800
Corrent de sortida per canal	10 A màx
Corrent total de sortida	15 A màx
Dimensions	108 x 45 x 18 mm
Temperatura de funcionament	-20 a 45 °C
Supported LED Strip ICs	WS2811, WS2812, WS2812B, FL19038, SK6812, SM16703P, SM16703SP3, TM1814, WS2813, WS2815, FCOB, etc.
Connectivitat	WiFi (ESP32)
Característiques especials	Dimmable, Microphone Function, UART Port

5. Configuració i instal·lació

5.1 Disseny del controlador

GLEDOPTO ESP32 WLED Digital LED Controller, top view showing input/output terminals, model number, and features. — Figure 1: GLEDOPTO ESP32 WLED Digital LED Controller. This image displays the top view of the controller, highlighting its input and output terminals, model number (GL-C-015WL-D), and various features such as the UART port and microphone icon.

5.2 Instruccions de cablejat

Follow these steps for proper wiring of your LED strip to the controller:

Wiring diagram for GLEDOPTO WLED controller showing VCC, DATA, and GND connections. — Figure 2: Wiring Diagram. This image shows the top view of the GLEDOPTO controller with wires connected, illustrating the V=VCC, D=DATA, and G=GND connections. It indicates that the group of D for GPIO16 is the default output and should be used first.

Connect the positive (+) terminal of your power supply to the V+ input on the controller.
Connect the negative (-) terminal of your power supply to the V- input on the controller.
Connect the VCC wire from your LED strip to the V output terminal on the controller.
Connect the DATA wire from your LED strip to the D (GPIO16) output terminal on the controller. This is the default output. The other D (GPIO2) can be used after configuration in the app.
Connect the GND wire from your LED strip to the G output terminal on the controller.

5.3 Quick Connect Port Design

The controller features a quick connect port design for convenient wiring:

Three-step guide to quick connect wiring for the LED controller. — Figure 3: Quick Connect Port Design. This image illustrates the three steps for wiring: 1. Open the connector upwards, 2. Press down after inserting the wire, and 3. Shows the completed wiring with wires securely in place, indicating the product is ready for use.

Open the connector upwards.
Insert the stripped wire into the port.
Press down on the connector to secure the wire.

6. Funcionament

6.1 Funcions dels botons

The controller has two physical buttons for basic control:

GLEDOPTO controller highlighting Restart and Opt buttons with their functions. — Figure 4: Button Functions. This close-up image of the GLEDOPTO controller highlights the 'Restart' and 'Opt' buttons. It details that the 'Restart' button powers off and on the controller, useful for restarting after microphone configuration. The 'Opt' button has functions for short press (power on/off), long press for 1 second (switch colors), and long press for 10 seconds (reset WLED controller and activate WLED-AP hotspot).

Botó de reinici: Pressing this button will temporarily power off the controller module. Releasing it will power it back on. This is useful for restarting the controller after configuring the microphone or other settings.
Opt Button:
- Premsa curta: Encén o apaga el dispositiu.
- Long Press (1 second): Switches between available colors or effects.
- Premda llarga (10 segons): Resets the WLED controller and activates the WLED-AP hotspot for initial setup or re-configuration.

6.2 Control d'aplicacions

The GLEDOPTO controller is primarily managed through the WLED application, offering extensive control over your LED strips.

6.2.1 Efectes dinàmics

The WLED app provides access to over 100 dynamic lighting effects, allowing for personalized ambiance.

Smartphone displaying the WLED app interface with a list of dynamic lighting effects. — Figure 5: Dynamic Effects in WLED App. This image shows a smartphone screen displaying the WLED application interface, listing various dynamic lighting effects such as Solid, Android, Aurora, Blends, Blink, and Bouncing Balls, demonstrating the wide range of options available.

6.2.2 Segmented Color Control

Customize individual segments of your LED strip to display different colors simultaneously.

Bedroom scene with an LED strip behind the bed showing segmented color control. — Figure 6: Segmented Color Control. This image depicts a bedroom setting with an LED strip installed behind the bed, showcasing the segmented color control feature where different sections of the strip illuminate with distinct colors, allowing for personalized lighting designs.

6.2.3 Microphone Function

The built-in microphone allows the LED lights to synchronize with music or ambient sounds, creating immersive audio-reactive lighting experiences.

People dancing in a living room with LED lights reacting to music. — Figure 7: Microphone Function in Action. This image shows a mother and child dancing in a living room, which is illuminated by colorful LED lights that are reacting to music, demonstrating the controller's microphone function for audio-reactive lighting.

GLEDOPTO WLED controller in a kitchen setting with musical notes, emphasizing the microphone feature. — Figure 8: Built-in Sensitive Microphone. This lifestyle image places the GLEDOPTO WLED controller in a modern kitchen environment, with colorful musical notes emanating from it, visually emphasizing the built-in sensitive microphone feature that allows lights to react to sound.

6.3 Integració d'Alexa

The controller supports integration with Amazon Alexa for voice control. Follow these steps to connect:

Screenshots detailing steps to connect the WLED controller with Amazon Alexa. — Figure 9: Steps for Connecting with Alexa. This image presents a series of smartphone screenshots, guiding users through the process of integrating the WLED controller with Amazon Alexa. It shows navigating through WLED app settings to enable Alexa emulation and then using the Amazon Alexa app to discover and add the device.

Go to the control page of the WLED controller in the app, click on the "Config" button in the top right corner to enter the settings, and then click on "Sync Interfaces".
Scroll up to find "Alexa Voice Assistant", check the box next to "Emulate Alexa device", and then save.
After successfully saving, power cycle the WLED controller once by turning it off and on.
Open the Amazon Alexa app, click on the "Devices" page at the top right corner on the "+" sign, and then click "Add Device".
Then, scroll up and click on "Other" to enter, select "Wi-Fi", and then click "Discover Devices" to search for lights.

7. Actualitzacions de firmware

The integrated UART port allows for convenient firmware updates. Refer to the official WLED documentation or GLEDOPTO support resources for detailed instructions on how to perform firmware updates. Always ensure you are using the correct firmware version for your ESP32 chip to prevent damage.

8. Manteniment

Keep the controller clean and free from dust. Use a dry, soft cloth for cleaning.
Eviteu exposar el controlador a la humitat o a temperatures extremes.
Assegureu-vos una ventilació adequada al voltant del dispositiu per evitar el sobreescalfament.

9. Solució De Problemes

El controlador no s'encén: Check power supply connections and ensure the input voltage is within the 5-24V DC range.
LED strip not lighting up: Verify all wiring connections (VCC, DATA, GND) are secure and correct. Ensure the LED strip type is supported by the controller.
Sense connexió Wi-Fi: Perform a long press (10 seconds) on the Opt button to reset the controller and activate the WLED-AP hotspot for re-configuration. Ensure your router is operating on a 2.4GHz band.
Alexa integration issues: Double-check that "Emulate Alexa device" is enabled in the WLED app settings and that you have power cycled the controller after saving. Ensure the Alexa app is discovering devices on the correct network.
Incorrect colors or effects: Verify the LED strip type and IC settings in the WLED app.

10. Garantia i Suport

For warranty information and technical support, please refer to the GLEDOPTO official weblloc web o poseu-vos en contacte amb el vostre distribuïdor. Conserveu el rebut de compra per a reclamacions de garantia.

GLEDOPTO GL-C-015WL-D