Manual d'usuari del ratolí de jocs sense fil CHERRY XTRFY M68 Pro 8K

Introducció

The CHERRY XTRFY M68 Pro 8K Wireless Gaming Mouse is engineered for competitive gaming, offering ultra-fast response times and precise control. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your M68 Pro 8K mouse to ensure optimal performance.

Contingut del paquet

• CHERRY XTRFY M68 Pro 8K Wireless Gaming Mouse
• CHERRY XTRFY EZcord Charging Cable (USB-C to USB-A)
• USB Wireless Receiver (Dongle)

Producte acabatview

Familiarize yourself with the components of your M68 Pro 8K Wireless Gaming Mouse.

Figura 1: superior view of the M68 Pro 8K mouse, showing the left and right click buttons, scroll wheel, and CHERRY XTRFY logo.

Figura 2: lateral view of the M68 Pro 8K mouse, highlighting the two side buttons and the ergonomic curvature.

Figura 3: A baix view of the M68 Pro 8K mouse, showing the optical sensor, power switch, and configuration switches for DPI, Polling Rate, Debounce Time, and Lift-off Distance.

• Botons de clic esquerre/dret: Primary input buttons.
• Roda de desplaçament: Per a la funcionalitat de desplaçament vertical i clic amb el botó central.
• Botons laterals: Two programmable buttons on the left side (default: Forward/Backward).
• Sensor òptic: High-performance Pixart 3395 sensor for precise tracking.
• Interruptor d'alimentació: Situat a la part inferior del ratolí.
• Interruptors de configuració: Located on the bottom for adjusting CPI (DPI), Polling Rate (PR), Debounce Time (DT), and Lift-off Distance (OFF).

Configuració

Wireless Connection (Recommended)

1. Insert USB Wireless Receiver: Locate the USB wireless receiver (dongle) included in the package. Plug it into an available USB-A port on your computer.

   

   Figure 4: The CHERRY XTRFY EZcord charging cable and the USB wireless receiver.
2. Power On Mouse: Flip the power switch on the bottom of the M68 Pro 8K mouse to the "ON" position.
3. Maridatge: The mouse should automatically connect to the receiver. If not, ensure the receiver is properly inserted and the mouse is powered on. The mouse's LED indicator may show connection status.

Wired Connection (Charging/Alternative)

1. Connectar el cable: Plug the USB-C end of the CHERRY XTRFY EZcord charging cable into the USB-C port on the mouse (located on the right side towards the rear).
2. Connexió a l'ordinador: Plug the USB-A end of the cable into an available USB-A port on your computer.
3. Ús: El ratolí funcionarà en mode amb cable i es carregarà simultàniament.

Instruccions de funcionament

The M68 Pro 8K mouse allows for on-the-fly adjustments without the need for software. All settings are controlled via switches on the bottom of the mouse.

Adjusting CPI (DPI)

The CPI (Counts Per Inch) switch allows you to change the mouse sensitivity.

• Locate the "CPI" switch on the bottom of the mouse (refer to Figure 3).
• Toggle the switch to cycle through available CPI settings (e.g., 400, 800, 1600, 3200, 6400, 12800, 26000 DPI). The mouse's LED may indicate the current setting.

Adjusting Polling Rate (PR)

The Polling Rate determines how often the mouse reports its position to the computer. Higher polling rates provide smoother and more responsive tracking.

• Locate the "PR" switch on the bottom of the mouse.
• Toggle the switch to select your desired polling rate (e.g., 125 Hz, 500 Hz, 1000 Hz, 8000 Hz). The M68 Pro 8K supports up to 8000 Hz for ultra-low latency.

Adjusting Debounce Time (DT)

Debounce time is the delay before a second click is registered after the first. Lower debounce times can reduce click latency but may increase the risk of double-clicking.

• Locate the "DT" switch on the bottom of the mouse.
• Adjust the switch to select your preferred debounce time setting.

Adjusting Lift-off Distance (OFF)

Lift-off distance (LOD) is the height at which the mouse stops tracking when lifted from the surface.

• Locate the "OFF" switch on the bottom of the mouse.
• Toggle the switch to select between different LOD settings (e.g., low, high).

Carregant el ratolí

The M68 Pro 8K Wireless Gaming Mouse features a built-in rechargeable battery.

• Durada de la bateria: The mouse offers up to 90 hours of playtime per charge in Standard Gaming Mode. Performance settings can affect battery duration.
• Càrrega: Connect the CHERRY XTRFY EZcord charging cable to the mouse's USB-C port and the other end to a USB-A port on your computer or a USB wall adapter.
• Indicador de càrrega: The mouse's LED indicator will show charging status (e.g., solid light for charging, off when fully charged).
• Reprodueix mentre carrega: You can continue to use the mouse in wired mode while it is charging.

Manteniment

Proper care will extend the life and performance of your M68 Pro 8K mouse.

• Neteja: Feu servir un drap suau i sec per netejar la superfície del ratolí. Per a la brutícia persistent, netegeu lleugerament.amp Es pot fer servir un drap, però assegureu-vos que no entri humitat al ratolí.
• Cura del sensor: Keep the optical sensor on the bottom of the mouse clean and free of dust or debris for optimal tracking.
• Emmagatzematge: Quan no l'utilitzeu durant períodes prolongats, guardeu el ratolí en un lloc fresc i sec.
• Eviteu líquids: Do not expose the mouse to excessive moisture or immerse it in liquids.

Resolució de problemes

If you encounter issues with your M68 Pro 8K mouse, try the following solutions:

Especificacions

Garantia i Suport

CHERRY XTRFY products are built with quality and durability in mind. For information regarding warranty coverage, technical support, or frequently asked questions, please visit the official CHERRY XTRFY weblloc.

Oficial Weblloc: www.cherryxtrfy.com

For specific product support, you may also refer to the manufacturer's support page or contact their customer service directly.